MEANWELL ELG-200-12AB-3Y Datasheet

(for DA-Type only)

144~200W Constant Voltage + Constant Current LED Driver

110

MM

SELV

IP65

IP67

Type HL

ELG-200 series

IS 15885(Part 2/Sec13)

8

R-41027766

(for 12/12B/24/24B/36/36A
/42A/48/48A/54Aonly)

■ Features ■ Applications
Constant Voltage + Constant Current mode output

Metal housing design with functional Ground
Built-in active PFC function
 <0.5WNo load / Standby power consumption
IP67 / IP65 rating for indoor or outdoor installations
Function options: output adjustable via potentiometer;

3 in 1 dimming (dim-to-off); Smart timer dimming; DALI

LED street lighting
LED architectural lighting
LED bay lighting
LED floodlighting
Type HL for use in Class I, Division 2

hazardous (Classified) location.

Typical lifetime>50000 hours
5 years warranty

THOMAS SAMUEL

THOMAS SAMUEL

■ Description

ELG-200 series is a 200W AC/DC LED driver featuring the dual mode constant voltage and
constant current output. ELG-200 operates from 100 305VAC and offers models with different～
rated voltage ranging between 12V and 54V. Thanks to the high efficiency up to 93%, with the
fanless design, the entire series is able to operate for -40 ~ +90 case temperature under free℃℃
air convection. The design of metal housing and IP67/IP65 ingress protection level allows this series

to fit both indoor and outdoor applications. ELG-200 is equipped with various function options, such as
dimming methodologies, so as to provide the optimal design flexibility for LED lighting system

■ Model Encoding

Type

Blank

A

B

AB IP65

DA

Dx

D2

IP Level

IP67
IP65
IP67

IP67
IP67
IP67

-24ELG - 200

Io and Vo fixed.

Io and Vo adjustable through built-in potentiometer.
3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
Io and Vo adjustable through built-in potentiometer &

3 in 1 dimming function (0~10Vdc, 10V PWM signal and resistance)
DALI control technology.
Built-in Smart timer dimming function by user request.
Built-in Smart timer dimming and programmable function.

A

-

Input wiring type

Function mode option

Rated output voltage(12/24/36/42/48/54V)
Rated wattage

Series name

Function Note

Blank:2-wire input for standard model

{

3Y:3-wire input for standard model

File Name:ELG-200-SPEC 2018-09-30

In Stock
In Stock
In Stock

In Stock

In Stock

By request

In Stock

SPECIFICATION

MODEL

DC VOLTAGE

CONSTANT CURRENT REGION

RATED CURRENT

RATED POWER

RIPPLE & NOISE (max.)

VOLTAGE ADJ. RANGE

OUTPUT

CURRENT ADJ. RANGE

VOLTAGE TOLERANCE

LINE REGULATION

LOAD REGULATION

SETUP, RISE TIME

HOLD UP TIME (Typ.)

VOLTAGE RANGE

FREQUENCY RANGE

POWER FACTOR

TOTAL HARMONIC DISTORTION

INPUT

PROTECTION

ENVIRONMENT

SAFETY &

EMC

NOTE

EFFICIENCY (Typ.)

AC CURRENT

INRUSH CURRENT(Typ.)

MAX. No. of PSUs on 16A
CIRCUIT BREAKER

LEAKAGE CURRENT

NO LOAD / STANDBY
POWER CONSUMPTION

OVER CURRENT

SHORT CIRCUIT

OVER VOLTAGE

OVER TEMPERATURE

WORKING TEMP.

MAX. CASE TEMP.

WORKING HUMIDITY

STORAGE TEMP., HUMIDITY

TEMP. COEFFICIENT

VIBRATION

SAFETY STANDARDS

DALI STANDARDS

WITHSTAND VOLTAGE

ISOLATION RESISTANCE

EMC EMISSION

EMC IMMUNITY
MTBF

DIMENSIONOTHERS

PACKING

1. All parameters NOT specially mentioned are measured at 230VAC input, rated and 25 of ambient temperature.current ℃

2. Please refer to "DRIVING METHODS OF LED MODULE".

3. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.

4. Tolerance : includes set up tolerance, line regulation and load regulation.

5. De rating may be needed under low input voltages. Please .- refer to STATIC CHARACTERISTIC sections for details

6. Length of set up time is measured at first cold start. Turning ON/OFF the driver may lead to increase of the set up time.

7. No load/standby ower consumption is specified for 230VAC input.p

8. The driver is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the
complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.

9. This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly tc point (or TMP, per DLC), is about 70 or less.℃

10.Please refer to the warranty statement on MEAN WELL's website at http://www.meanwell.com

11.The ambient temperature derating of 3.5 /1000m with fanless models and of 5 /1000m with fan models for operating altitude higher than 2000m(6500ft).℃℃

12.For any application note and IP water proof function installation caution, please refer our user manual before using.

https://www.meanwell.com/Upload/PDF/LED_EN.pdf

144~200W Constant Voltage + Constant Current LED Driver

Note.6

Note.5

ELG-200-12

12V

Note.2

6 ~ 12V

16A

200VAC ~ 305VAC

192W

100VAC ~ 180VAC

144W

150mVp-p

Note.3

Adjustable for A/AB-Type only (via built-in potentiometer)

11.2 ~ 12.8V

Adjustable for A/AB-Type only (via built-in potentiometer)

8 ~ 16A
±3.0%

Note.4

±0.5%
±2.0%

500ms, 100ms/230VAC, 1000ms, 100ms/115VAC

10ms/ 230VAC 10ms/ 115VAC

100 ~ 305VAC 142 ~ 431VDC

(Please refer to "STATIC CHARACTERISTIC" section)

47 ~ 63Hz

PF 0.97/115VAC, PF 0.95/230VAC, PF 0.92/277VAC@full load≧≧≧
(Please refer to "POWER FACTOR (PF) CHARACTERISTIC" section)

THD< 20%(@load 50%/115VC,230VAC; @load 75%/277VAC)≧≧
(Please refer to “TOTAL HARMONIC DISTORTION(THD)” section)

90%

1.8A / 115VAC 1.2A / 230VAC 1.0A/277VAC

COLD START 60A(twidth= s measured at 50% Ipeak) at 230VAC510μ;Per NEMA 410

4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC

<0.75mA / 277VAC

No load power consumption <0.5W for Blank /A/ Dx / D-Type

Note.7

Standby power consumption <0.5W for B / AB / DA-Type

95 ~ 108%

Constant current limiting, recovers automatically after fault condition is removed

Hiccup mode, recovers automatically after fault condition is removed

13.5 ~ 18V

Shut down output voltage, re-power on to recover

Shut down output voltage, re-power on to recover

Tcase=-40 ~ +90 (Please refer to “ OUTPUT LOAD vsTEMPERATURE” section)℃

Tcase=+90℃
20 ~ 95% RH non-condensing

-40 ~ + , 10 ~ 95% RH90℃

±℃ ℃0.03%/ (0 ~ 50 )

10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes

UL8750 independent, EN62384;(type”HL”), CSA C22.2 No. 250.13-12;IEC/EN/AS/NZS 61347-1, IEC/EN/AS/NZS 61347-2-13
EAC TP TC 004;BIS IS15885(for 12/12B/24/24B/36/36A/42A/48/48A/54A only) GB19510.14,GB19510.1; IP65 or IP67;;

Compiy with IEC62386-101,102,207 for DA-Type only

I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC

I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH℃

Compliance to

Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level ( )surge immunity Line-Earth 6KV, Line-Line 4KV ;EAC TP TC 020; K

826.7K hrs min. Telcordia SR-332 (Bellcore) ; 200.8Khrs min. MIL-HDBK-217F (25 )℃

244 71* *37.5mm (L*W*H)

1.22Kg; 12pcs / 15.2Kg / 0.72CUFT

ELG-200-24

24V

12 ~ 24V

8.4A

201.6W

150W

200mVp-p

22.4 ~ 25.6V

4.2 ~ 8.4A

±2.0%
±0.5%
±0.5%

92%

27 ~ 34V

approvedKC KN61347 1 KN61347 2 13-, --

,EN61000-3-2 Class C (@load 50%) ; EN61000-3-3;GB17625.1,GB17743≧

EN55015

ELG-200-36

36V

18 ~ 36V

5.55A

199.8W

149.76W

250mVp-p

33.5 ~ 38.5V

2.78 ~ 5.55A

±2.0%
±0.5%
±0.5%

92%

42 ~ 49V

ELG-200-42

42V

21 ~ 42V

4.76A

199.9W

149.94W

250mVp-p

39 ~ 45V

2.38 ~ 4.76A

±2.0%
±0.5%
±0.5%

92.5%

47 ~ 54V

ELG-200 series

ELG-200-48

48V

24 ~ 48V

4.16A

199.68W

149.76W

250mVp-p

44.8 ~ 51.2V

2.08 ~ 4.16A

±2.0%
±0.5%
±0.5%

93%

54 ~ 63V

;EAC TP TC 020; K

File Name:ELG-200-SPEC 2018-09-30

ELG-200-54

54V

27 ~ 54V

3.72A

200.88W

150.12W

350mVp-p

50 ~ 57V

1.86 ~ 3.72A

±2.0%
±0.5%
±0.5%

93%

60 ~ 67V

C KN15 KN61547,

C KN15 KN61547,

Block Diagram

144~200W Constant Voltage + Constant Current LED Driver

ELG-200 series

PFC fosc : 50~120KHz

PWM fosc : 60~130KHz

I/P

EMI FILTER

&

RECTIFIERS

PFC

CIRCUIT

O.L.P.O.T.P.O.T.P.

PFC CONTROL

CASE :Protective Earth

POWER

SWITCHING

PWM & P FC

CONTROL

DRIVING METHODS OF LED MODULE

※ This series is able to work in either Constant Current mode (a direct drive way) or

Constant Voltage mode (usually through additional DC/DC driver) to drive the LEDs.

100

Vo(%)

50

(min.)

(A)

Constant

V areaoltage

(B)

Constant

Current area

(C)

Hiccup

Protection

In the constant current region, the highest voltage at the output of the driver
depends on the configuration of the end systems.

Should there be any compatibility issues, please contact MEAN WELL.

RECTIFIERS

&

FILTER

Vo+
Vo-

O.L.P.

DETECTION

CIRCUIT

O.V.P.

50

100

Io(%)

Typical output current normalized by rated current (%)

File Name:ELG-200-SPEC 2018-09-30

144~200W Constant Voltage + Constant Current LED Driver

DIMMING OPERATION

ELG-200 series

ACN(Blue)
ACL(Brown)

ELG-200

※ 3 in 1 dimming function (for B/AB-Type)

Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:

0 ~ 10VDC, or 10V PWM signal or resistance.

Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
Dimming source current from power supply: 100 A (typ.) μ

◎ Applying additive 0 ~ 10VDC

+

Vo+

-

Vo-

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

+

Additive Voltage

-

+

-

◎ Applying additive 10V PWM signal (frequency range 100Hz ~ 3KHz):

+

Vo+

-

Vo-

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

Additive PWM signal

+

-

100%

90%

80%

70%

60%

50%

40%

Output current (%)

30%

20%

10%

0%

0V 1V 2V 3V 4V 5V 6V 7V 8V 9V 10V

Dimming input:Additive voltage

100%

90%

80%

70%

60%

50%

40%

Output current (%)

30%

20%

10%

0%

0%

10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

Duty cycle of additive 10V PWM signal dimming input

Vo-(Black)
Vo+(Red)

DIM+(Blue)*
DIM-(White)**

* DIM + for B/A B-Type

DA+ for DA-Type
PROG+ for D2-Type

* *DIM- for B/AB-Type

DA- for DA-Type
PROG- for D2-Type

◎ Applying additive resistance:

+

Vo+

-

Vo-

DIM+

DIM-

“DO NOT connect "DIM- to Vo-"

Additive Resistance

+

-

Note : 1. Min. dimming level is about 8% and the output current is not defined when 0%< out<8%.I

2. The output current could drop down to 0% when dimming input is about 0k or 0Vdc, or 10V PWM signal with 0% duty cycle.Ω

100%

90%

80%

70%

60%

50%

40%

Output current (%)

30%

20%

10%

0%

Short

10K/N 20K/N 30K/N 40K/N 50K/N 60K/N 70K/N 80K/N 90K/N 100K/N

(N=driver quantityfor synchronized )dimming operation

Dimming input:Additive resistance

File Name:ELG-200-SPEC 2018-09-30

144~200W Constant Voltage + Constant Current LED Driver

※ DAL Interface (primary side; for DA-Type)I
Apply DALI signal between DA+ and DA-.

DAL protocol comprises 16 groups and 64 addresses. I
First step is fixed at 8% of output.

※ Smart timer dimming function (for Dxx-Type by User definition)

MEAN WELLSmart timer dimming primarily provides the adaptive proportion dimming profile for the output constant current level to perform up to 14
consecutive hours. 3 dimming profiles hereunder are defined accounting for the most frequently seen applications. If other options may be needed,
please contact MEAN WELL for details.

Ex : D01-Type: the profile recommended for residential lighting◎

Set up for D01-Type in Smart timer dimming software program:

ELG-200 series

T1

TIME**

LEVEL**

Dimming Level(%)

Operating Time(HH:MM)

**: TIME matches Operating Time in the diagram whereas LEVELmatches Dimming Level.

Example: If a residential lighting application adopts D01-Type, when turning on the power supply at 6:00pm, for instance:
[1] The power supply will switch to the constant current level at 100% starting from 6:00pm.
[2] The power supply will switch to the constant current level at 70% in turn, starting from 0:00am, which is 06:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 50% in turn, starting from 1:00am, which is 07:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.

The constant current level remains till 8:00am, which is 14:00 after the power supply turns on.

Ex: D02-Type: the profile recommended for street lighting◎

Set up for D02-Type in Smart timer dimming software program:

06:00

100% 70%

T1

T2

T2

07:00

T3

T3

11: 00

50%

T4

---

70%

T4 T5

TIME**

LEVEL**

Dimming Level(%)

Operating Time(HH:MM)

**: TIME matches Operating Time in the diagram whereas LEVELmatches Dimming Level.
Example: If a street lighting application adopts D02-Type, when turning on the power supply at 5:00pm, for instance:
[1] The power supply will switch to the constant current level at 50% starting from 5:00pm.
[2] The power supply will switch to the constant current level at 80% in turn, starting from 6:00pm, which is 01:00 after the power supply turns on.
[3] The power supply will switch to the constant current level at 100% in turn, starting from 8:00pm, which is 03:00 after the power supply turns on.
[4] The power supply will switch to the constant current level at 60% in turn, starting from 1:00am, which is 08:00 after the power supply turns on.
[5] The power supply will switch to the constant current level at 80% in turn, starting from 4:00am, which is 11:00 after the power supply turns on. The

constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

01:00

03:00

80%50%

8:00 11:00

100%

60% 80%

File Name:ELG-200-SPEC 2018-09-30

---

Ex: D03-Type: the profile recommended for tunnel lighting◎

144~200W Constant Voltage + Constant Current LED Driver

Set up for D03-Type in Smart timer dimming software program:

T1 T2 T3

ELG-200 series

TIME** 01:30

Dimming Level(%)

Operating Time(HH:MM)

**: TIME matches Operating Time in the diagram whereas LEVELmatches Dimming Level.
Example: If a tunnel lighting application adopts D03-Type, when turning on the power supply at 4:30pm, for instance:
[1] The power supply will switch to the constant current level at 70% starting from 4:30pm.
[2] The power supply will switch to the constant current level at 100% in turn, starting from 6:00pm, which is 01:30 after the power supply turns on.
[3] The power supply will switch to the constant current level at 70% in turn, starting from 5:00am, which is 11:00 after the power supply turns on.
The constant current level remains till 6:30am, which is 14:00 after the power supply turns on.

LEVEL** 70% 100% 70%

11:00 ---

File Name:ELG-200-SPEC 2018-09-30

80

82

84

86

88

90

92

94

96

10% 20% 30% 40% 50% 60% 70% 80% 90% 100%

277V(200W)

230V(200W)

115V(150W)

0.84

0.86

0.88

0.9

0.92

0.94

0.96

0.98

1

50% 60% 70% 80% 90% 100%

277V(200W)

230V(200W)

115V(150W)

144~200W Constant Voltage + Constant Current LED Driver

4%

6%

8%

10%

12%

14%

16%

18%

50% 60% 70% 80% 90% 100%

277V(200W )

230V(200W )

115V(150W )

OUTPUT LOAD vs TEMPERATURE(Note.10)

ELG-200 series

100

80

230VAC

input only

60

40

LOAD (%)

20

-40 -25 100 20305060 70

12V

AMBIENT TEMPERATURE,Ta ( )℃

◎ If ELG-200 operates in Constant Current mode with the

rated current, the maximum workableTa is 50 for℃
12V-model whereas 60 for other models.℃

STATIC CHARACTERISTIC

100

90

80
75
70

60

50

LOAD (%)

40

others

(HORIZONTAL)

100

80

230VAC

input only

60

40

LOAD (%)

20

-40-250 204555657590

110VAC110VAC

Tcase ( )℃

POWER FACTOR (PF) CHARACTERISTIC

※ Tcase at 80℃

Constant Current Mode

PF

(HORIZONTAL)

100 120 140 160 180 200 240 250 260 270 280 305

INPUT VOLTAGE (V) 60Hz

※De-rating is needed under low input voltage.

TOTAL HARMONIC DISTORTION (THD)

※ 48V Model, Tcase at 80℃

THD

LOAD

LOAD

EFFICIENCY vs LOAD

ELG-200 series possess superior working efficiency that up to 93% can
be reached in field applications.

※ 48V Model, Tcase at 80℃

EFFICIENCY(%)

LOAD

File Name:ELG-200-SPEC 2018-09-30

0

20

40

60

80

100

120

20 30 40 50 60 70 80 90

LIFE TIME

144~200W Constant Voltage + Constant Current LED Driver

LIFETIME(Kh)

Tc a s e )(

℃

ELG-200 series

File Name:ELG-200-SPEC 2018-09-30

144~200W Constant Voltage + Constant Current LED Driver

MECHANICAL SPECIFICATION

※ Blank-Type (for 12V model)

300±20

ACN(Blue)

ACL(Brown)

SJOW 17AWGx2C
&H05RN-F 1.0mm

ELG-200 series

CASE NO.: 262A Unit:mm

244
233

220

71

53.8

2

4- 4.5ψ

tc

 : Max. CaseTemperature

tc

32

90

300±20

SJTW 14AWGx2C

37

37.5

Vo-(Black)
Vo+(Red)

※ Blank-Type (for other models)

ACN(Blue)

ACL(Brown)

SJOW 17AWGx2C
&H05RN-F 1.0mm

300±20

244
233

220

71

53.8

2

4- 4.5ψ

tc

 : Max. CaseTemperature

tc

32

90

300±20

SJOW 17AWGx2C

37

37.5

&05RN-F 1.0mm

Vo-(Black)

Vo+(Red)

2

File Name:ELG-200-SPEC 2018-09-30

144~200W Constant Voltage + Constant Current LED Driver

ELG-200 series

※ A-Type (for 12V model)

ACN(Blue)

ACL(Brown)

300±20

SJOW 17AWGx2C
&H05RN-F 1.0mm

244
233

220

71

53.8

2

4- 4.5ψ

tc

 : Max. CaseTemperature

tc

32

90

300±20

SJTW 14AWGx2C

37

37.5

21.01

Vo-(Black)
Vo+(Red)

※ A-Type (for other models)

ACN(Blue)

ACL(Brown)

SJOW 17AWGx2C
&H05RN-F 1.0mm

300±20

38.5

14.5

244
233

220

71

53.8

2

4- 4.5ψ

tc

 : Max. CaseTemperature

tc

32

90

300±20

SJOW 17AWGx2C

37

37.5

&05RN-F 1.0mm

Vo-(Black)

Vo+(Red)

2

14.5

21.01

38.5

File Name:ELG-200-SPEC 2018-09-30

144~200W Constant Voltage + Constant Current LED Driver

※ AB-Type (for 12V model)

300±20

244
233

220

ELG-200 series

300±20

ACN(Blue)

ACL(Brown)

SJOW 17AWGx2C
&H05RN-F 1.0mm

※ AB-Type (for other models)

300±20

38.5

SJTW 14AWGx2C

UL2517 20AWGx2C

37

37.5

21.01

300±20

Vo-(Black)
Vo+(Red)

DIM+( )Blue
DIM-( )White

71

53.8

tc

2

4- 4.5ψ

tc

 : Max. CaseTemperature

32

244
233

220

90

14.5

ACN(Blue)

ACL(Brown)

SJOW 17AWGx2C
&H05RN-F 1.0mm

SJOW 17AWGx2C

71

53.8

tc

2

4- 4.5ψ

tc

 : Max. CaseTemperature

32

90

14.5

&05RN-F 1.0mm

UL2517 20AWGx2C

38.5

37

37.5

21.01

2

File Name:ELG-200-SPEC 2018-09-30

Vo-(Black)

Vo+(Red)

DIM+( )Blue
DIM-( )White

144~200W Constant Voltage + Constant Current LED Driver

※ B/DA/D2-Type (for 12V model)

300±20

244
233

220

ELG-200 series

300±20

ACN(Blue)

ACL(Brown)

SJOW 17AWGx2C
&H05RN-F 1.0mm

※ B/DA/D2-Type (for other models)

300±20

ACN(Blue)

ACL(Brown)

SJOW 17AWGx2C
&H05RN-F 1.0mm

71

53.8

tc

2

4- 4.5ψ

tc

 : Max. CaseTemperature

71

53.8

2

4- 4.5ψ

tc

 : Max. CaseTemperature

32

244
233

220

tc

32

90

90

SJTW 14AWGx2C

UL2517 20AWGx2C

37

37.5

300±20

SJOW 17AWGx2C
&05RN-F 1.0mm

UL2517 20AWGx2C

Vo-(Black)
Vo+(Red)

DIM+( )*Blue
DIM-( e)**Whit

* DIM + for B-Ty pe

DA+ for DA-Type
PROG+ for D2-Type

* *DIM- for B-Type

DA- for DA-Type
PROG- for D2-Type

2

Vo-(Black)

Vo+(Red)
DIM+( )*Blue
DIM-( )**White

* DIM + for B-Ty pe

DA+ for DA-Type
PROG+ for D2-Type

* *DIM- for B-Type

DA- for DA-Type
PROG- for D2-Type

37

37.5

File Name:ELG-200-SPEC 2018-09-30

144~200W Constant Voltage + Constant Current LED Driver

※ 3Y Model (3-wire input)

244
233

300±20

71

AC/N(Blue)
AC/L(Brown)

PE (Green/Yellow)

SJOW 17AWGx3C
&H05RN-F 1.0mm

53.8

2

4- 4.5ψ

tc

 : Max. CaseTemperature

◎ Note1: Please connect the case to PE for the complete EMC deliverance and safety use.
◎ Note2: Please contact MEAN WELL for input wiring option with PE.

220

tc

32

ELG-200 series

90

SJOW 17AWGx2C

&05RN-F 1.0mm

2

INSTALLATION MANUAL

Please refer to : http://www.meanwell.com/manual.html

File Name:ELG-200-SPEC 2018-09-30