Md sports SM18402 User Manual
INSTRUCCIONES DE ARMADO
Please contact us before returning the product to the store.
Toll Free: 877-472-4296
Por favor póngase en contacto con nosotros antes de
devolver el producto a la tienda.
Número telefónico gratis: 877-472-4296
MODEL/MODELO: 18402
LIMITED 90 DAYS WARRANTY
This product is covered by a limited warranty that is effective for 90 days
from the date of purchase. The warranty covers any defects in parts and
workmanship.
This Limited Warranty gives you specific legal rights and you may also have
other rights which very from one state (province) to another.
If, during the limited warranty period, a part is found to be defective or
breaks, we will offer replacement part at no cost to you, the customer. The
only exceptions to the warranty include m
surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper
usage, alteration, misuse, abuse, accidental damage or neglect.
Attention: Since you build all tables upside down, please inspect table tops
and playing surfaces right away before putting together.
ain frames, tabletops, playing
“PLEASE SAVE THESE INSTRUCTIONS
AND PURCHASE RECEIPT!”
A PURCHASE RECEIPT (or other proof of purchase date) will be required
before any warranty service is initiated. All requests for warranty service can
be submitted by email, in writing or by contacting our Consumer service
Department at:
TOLL FREE: 877-472-4296
WEBSITE: www.medalsports.com.tw
*Please do not call our 800 NUMBER as well as email us. This will result in
duplicate orders and charges will occur.
*Please note that all damaged table tops need to be returned to the store.
We do not replace any tabletops or playing surfaces.
PLEASE CONTACT US BEFORE RETURNING THE
PRODUCT TO THE STORE. THANK YOU VERY MUCH!
1
Phillips Screwdriver – Not Included
Standard (Flat Head Screwdriver) – Not Included
Allen Wrench - Included
TOOLS REQUIRED:
ASSEMBLY TIPS:
:
!
!
2
IMPORTANT NOTICE! Please contact us before returning the product to the store.
Please read the instructions carefully, and follow all assembly, operation or safety instructions
properly in order to avoid damage or injury. For the assembly, at least two adults are required.
Some figures or drawings may not look exactly like your product. Please read and understand
the text before beginning each assembly step.
1 -
2 -
Please Keep Your Instructions! Your Model number is necessary should you need to contact
us. Please read through this instruction manual book to familiarize yourself with all parts and
assembly steps. Kindly refer to the parts identifier below and be sure that all parts have been
included.
Although we are dedicated to giving our customers the best product possible, a question may
arise or parts may be missing. If you are missing parts, or, if you have any questions, please
contact our fast and friendly service centre on:
1 - This product is intended for INDOOR use only.
2 - Please Do Not sit, climb or lean on the game table.
3 - Please Do Not drag the table when moving it in order to avoid the damaged on the legs.
4 - Please only use spray furniture polish to clean the exterior surfaces on the game table.
5 - This is not a child's toy, adult supervision is required for children playing this game.
877-472-4296
Power Tools
- Set Low Torgue
High Torque
over tightened
CAUTION !
Electric Screwdrivers may be helpful during
assembly; however, please set a low torque
and use extreme caution.
IMPORTANT SAFETY INSTRUCTIONS
Read all instructions
1.
Read all instructions-All the safety and operating instructions should be read carefully before this hockey game is
played.
Caution-This is not a toy and is intended for use by or under the supervision of adults.Adults should review safety
2.
guidelines with children to avoid possible risk of electric shock or other injuries.
Power sources-This hockey game should be operated only from 110-120V A.C., 60 cycle current as indicated on
3.
the identification label. If you are not sure of the type of power supply to your home, consult your appliance dealer
or local power company.
4.
Power cord protection-Power cord should be routed so that it is not likely to be walked on or pinched by items
placed upon or against it.Pay particular attention to cords at plugs,convenience receptacles, and the point of
exit from the game.
Overloading-Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
5.
Object and liquid entry-Never push objects of any kind into this game through openings as they may touch
6.
dangerous voltage points or short-out parts which could result in a fire or electric shock. Never spill liquid of any
kind on the game.
Ventilation-Openings in the game are provided for the exhaust air to create a cushion effect. The openings on the
7.
air blower are for the intake air. Keep clear of the air blower when it is on. Do not put hand or other objects near
the intake openings. To ensure reliable operation of the game and protect it from overheating these openings must
not be blocked or covered.
8.
Damage requiring service-Unplug the game from the wall outlet.
Do not attempt to service the blower yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer servicing to qualified service personnel under the following conditions.
A. When the power supply cord or plug is damaged.
B. If liquid has spilled, or objects have fallen into the blower.
C. When the air blower exhibits a distinct change in performance e.g. abnormal noise, this indicates a need for
service.
Grounding or Polarization-This game is equipped with a polarized alternating current line plug (a plug having one
9.
blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
CAUTION-ELECTRICALLY OPERATED PRODUCT-Not recommended for children under 8 years of age. As with
10.
all electrical products, precautions should be observed during handling and use to reduce the risk of electric
shock.
We recommend that the game be periodically examined for conditions that may result in the risk of fire, electrical
11.
shock, or injury to persons. In the event such conditions exist, the game should not be used until properly
repaired.
RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS
12.
WARNING-When using electric appliances, basic precautions should always be followed, including the following:
A) Read all the instructions before using the appliances.
B) To reduce the risk of injury, close supervision is necessary when an appliance is used near children.
C) Do not contact moving parts.
D) Only use attachment recommended or sold by the manufacturer.
E) Do not use outdoors.
F) For a cord-connected appliance, the following shall be included:
-To disconnect, turn all controls to the off position, then remove plug from outlet.
-Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
-Unplug from outlet when not in use and before servicing or cleaning.
-Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or
damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or
electrical or mechanical adjustment.
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other).This
13.
plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
SAVE THESE INSTRUCTIONS
WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed
Control Device.
For Household use only.
3
18402 PARTS IDENTIFIER
1# 2#
Right Leg - A
2 Pieces
Left Leg - A
2 Pieces
13# 18#17#16#
Left Leg - B
2 Pieces
19# 21#
Right Leg - B
2 Pieces
8#7#
Side Apron
2 Pieces
1/4'' x 3/4''
Butterfly Bolt
8 Pieces
20#
3#
Leg Support Board Leg Base
4 Pieces
9# 10#
End Apron - A
1 Piece
15#14#
F4 x 1-3/4" Screw
56 Pieces
Leg Corner
4 Pieces
End Apron - B
1 Piece
T4 x 5/8'' Screw
15 Pieces
6#5#4#
Leg Inside Panel
4 Pieces
11#
1/4” x 1-3/8”
Allen Key Bolt
4 Pieces
T4 x 1/2" Screw
46 Pieces
23#22# 24#
12#
4 Pieces
5/16" Washer
16 Pieces
"U" Metal Bracket
1 Piece
Adapter
1 Piece
25# 26# 28#27# 29# 30#
Felt Pad
4 Pieces
31# 33#32# 34#
P3*1/2'' Screw
8 Pieces
37# 38# 39# 40#
(Plastic)
1 MM Shims
3 Pieces
(pre-installed)
8A#
5/16" x 1-1/2'' Hex Bolt
16 Pieces
(Plastic)
Hockey Puck
4 Pieces
(Plastic)
Screw Cap
8 Pieces
(Plastic)
2 MM Shims
3 Pieces
Blower And Wire
1 Set
Puck Catcher
with Long Sensor Wire
1 Piece
Scorer Unit
with Scorer Wire
1 Piece
(Plastic)
3 MM Shims
3 Pieces
Control Box
With Socket
1 Piece
Allen Key
1 Piece
Scorer Arm
with Guide Wire
1 Piece
Puck Catcher
with Short Sensor Wire
1 Piece
Apron Corner
4 Pieces
T4 x 3/4'' Screw
35#
Scorer Arm
41#
Wrench
1 Piece
4 Pieces
36#
(Plastic)
1 Piece
T4 x 3/8'' Bolt
"L" Bracket
(pre-installed)
1A#
Pusher
4 Pieces
8 Pieces
(pre-installed)
4 Pieces
T-Nut
16 Pieces
Nut
8 Pieces
4
ASSEMBLY INSTRUCTIONS
1. Find a clean, level place to begin the assembly of your Air Hockey Table. The table will be assembled upside
down and then turned over on its legs once the assembly completed. This game table is heavy, and tuning it
over will require at least four strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts identifier
below. Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work
surface.
FIG.1 LEG ASSEMBLY
3. Attach the Leg Support Board (#3) between a Right Leg - A (#1) and a Right Leg - B (#2) using six Screws (#15)
per Leg Support Board. Attach the Leg Support Board (#3) between a Left Leg - A (#7) and a Left Leg - B (#13)
using six Screws (#15) per Leg Support Board. See FIG.1A.
4. Attach the Leg Inside Panel (#5) to between the Leg A (#1 or #7) and the Leg B (#2 or #13) using four Screws
(#15) per Leg Inside Panel. See Fig. 1B.
5. Slide the Leg Corner (#4) to the groove of the Leg (FIG.1A assembled) using four Screws (#17). See FIG.1C.
and FIG.1D(Next Page).
15
Right Leg
2
FIG.1B
Left Leg
FIG.1A
15
15
3
3
15
1
7
13
FIG.1
FIG.1C
4
3
15
13
5
5
6. Attach the Leg Base (#6) to the Leg using four Screws (#15) per Leg Base. See FIG.1E.
7. Repeat the steps above for the other Leg parts.
FIG.1D
4
17
17
4
4
15
6
FIG.1E
3
1A
6
FIG.2 BLOWER ASSEMBLY
8. Insert the Blower (#21) into the air box underneath the table, then attach it to the table using five Screws (#16).
See FIG.2.
FIG.2
16
21
21
36
Main cabinet
FIG.3 LEG TO TABLE ASSEMBLY
9. Attach the Right and Left Leg (previously assembly) to the Table using four Blots (#20) and four Washers (#12)
per Leg. See FIG.3
Left Leg
Right Leg
FIG.3
Left Leg
Right Leg
12
20
12
7
20
Loading...