Md sports SC54805 User Manual
INSTRUCTIONS D`ASSEMBLAGE
Please contact us before returning the product to the store.
Toll Free: 877-472-4296
S'il vous plaît nous contacter avant de retourner le produit
au magasin.
Numéro sans frais: 877-472-4296
MODEL/MODÈLE: 54805
LIMITED 90 DAYS WARRANTY
This product is covered by a limited warranty that is effective for 90 days
from the date of purchase. The warranty covers any defects in parts and
workmanship.
This Limited Warranty gives you specific legal rights and you may also have
other rights which very from one state (province) to another.
If, during the limited warranty period, a part is found to be defective or
breaks, we will offer replacement part at no cost to you, the customer. The
only exceptions to the warranty include m
surfaces, batteries or tools.
The above warranty will not apply in cases of damages due to improper
usage, alteration, misuse, abuse, accidental damage or neglect.
Attention: Since you build all tables upside down, please inspect table tops
and playing surfaces right away before putting together.
ain frames, tabletops, playing
“PLEASE SAVE THESE INSTRUCTIONS
AND PURCHASE RECEIPT!”
A PURCHASE RECEIPT (or other proof of purchase date) will be required
before any warranty service is initiated. All requests for warranty service can
be submitted by email, in writing or by contacting our Consumer service
Department at:
TOLL FREE: 877-472-4296
WEBSITE: www.medalsports.com.tw
*Please do not call our 800 NUMBER as well as email us. This will result in
duplicate orders and charges will occur.
*Please note that all damaged table tops need to be returned to the store.
We do not replace any tabletops or playing surfaces.
PLEASE CONTACT US BEFORE RETURNING THE
PRODUCT TO THE STORE. THANK YOU VERY MUCH!
1
Phillips Screwdriver – Not Included
Standard (Flat Head Screwdriver) – Not Included
Allen Wrench - Included
TOOLS REQUIRED:
ASSEMBLY TIPS:
:
!
!
2
IMPORTANT NOTICE! Please contact us before returning the product to the store.
Please read the instructions carefully, and follow all assembly, operation or safety instructions
properly in order to avoid damage or injury. For the assembly, at least two adults are required.
Some figures or drawings may not look exactly like your product. Please read and understand
the text before beginning each assembly step.
1 -
2 -
Please Keep Your Instructions! Your Model number is necessary should you need to contact
us. Please read through this instruction manual book to familiarize yourself with all parts and
assembly steps. Kindly refer to the parts identifier below and be sure that all parts have been
included.
Although we are dedicated to giving our customers the best product possible, a question may
arise or parts may be missing. If you are missing parts, or, if you have any questions, please
contact our fast and friendly service centre on:
1 - This product is intended for INDOOR use only.
2 - Please Do Not sit, climb or lean on the game table.
3 - Please Do Not drag the table when moving it in order to avoid the damaged on the legs.
4 - Please only use spray furniture polish to clean the exterior surfaces on the game table.
5 - This is not a child's toy, adult supervision is required for children playing this game.
877-472-4296
Power Tools
- Set Low Torgue
High Torque
over tightened
CAUTION !
Electric Screwdrivers may be helpful during
assembly; however, please set a low torque
and use extreme caution.
54805 PARTS IDENTIFIER
#1
Billiard Cabinet
1 Piece
#7
Basketball Board
1 Piece
#13
4mm Lock Nut
4 Pieces
#19
#2
Hockey Table
With Table Tennis
1 Piece
#8
5/16'' *1'' Bolt
12 Pieces
#14
Plastic Screw
8 Pieces
#20
#3
Backgammon With
Bowling Board
1 Piece
#9
1/4''*1-1/8'' Bolt
4 Pieces
#15
F3*1/2" Screw
12 Pieces
#21
#4
Left Leg
2 Pieces
#10
4*12mm Bolt
4 Pieces
#16
P3.5*8mm Screw
#22
#5
Right Leg
2 Pieces
#11
5/16'' Butterfly Bolt
4 Pieces
#17
4*15mm Screw
8 Pieces4 Pieces
#23
#6
Leg Side Panel
2 Pieces
#12
1/4'' Hex Nut
4 Pieces
#18
4*12mm Screw
16 Pieces
#24
Crooked Pole
2 Pieces
#25
Rivet Plug
2 Pieces
#31 #32
Basketball
Return Net
1 Piece
Short Pole
2 Pieces
#26
8mm Leg Leveler
4 Pieces
Allen key
1 Piece
#27
Plastic Leg Base
#33
#37 #38 #39
1.5'' Pool Balls
1 Set
#43
1.5'' Triangle
1 Piece
#44
#45
Side Pocket
2 Pieces
4 Pieces
Hockey Pusher
2 Pieces
36'' Cues
2 Pieces
Corner Pocket
4 Pieces
#28
Rod Cap
2 Pieces
#34
Felt Pad
2 Pieces
#40
Table Tennis Net
#46
1 Piece
Corner Basket
4 Pieces
Basketball Net
1 Piece
#35
Hockey Puck
2 Pieces
#41
Table Tennis Ball
2 Pieces
#47
Side Basket
2 Pieces
#30#29
Rim
1 Piece
#36
Chalk
2 Pieces
#42
Table Tennis Bat
2 Pieces
#48
Bowling Pin
1 Set
Chess Set
1 Set
Bowling
1 Piece
Backgammon
Checker Set
1 Set
Tic-Tac-Toe
1 Set
Dice Box
1 Piece
3
Bean Bag
4 Pieces
Dice
5 Pieces
#53 #54#52#51#50#49
Baseball
1 Piece
Basketball
1 Piece
Foot Ball
1 Piece
Air Pump
1 Piece
#55
#56
#1A
Pre-installed
#4A
Pre-installed
Hockey stick
2 Pieces
Table tennis post
2 Pieces
F4 x 1-1/4”
Flat Head Screw
8 Pieces
Nut
16 Pieces
ASSEMBLY INSTRUCTIONS
1. Find a clean, level place to begin the assembly of your Combo Table. The table will be
assembled upside down and then turned over on its legs once the assembly completed.
This game table is heavy, and turning it over will require at least two strong adults.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown
on the parts identifier below. Carefully cut or tear the four corners of the box so that the
bottom of the box can be used as your work surface.
FIG.1 POCKET ASSEMBLY
3. Attach the Side Pocket (#21) to the bottom of Billiard Cabinet (#1) using four Screws (#17)
per Side Pocket. See FIG.1.
4. Attach the Corner Pocket (#22) to the bottom of Billiard Cabinet (#1) using two Screws (#18)
per Corner Pocket. See FIG.1.
5. Repeat the steps above for the other pockets.
FIG.1
21
1
FIG.2 LEG ASSEMBLY
17
22
18
14
FIG.2
1A
26
14
27
4
6. Attach the Plastic Leg Base (#27) to bottom of the
Left (#4) and Right(#5) Leg using two Plastic Screws
(#14) per Leg Base. See FIG.2.
7. Next, screw the Leg Leveler (#26) into the top of the
Leg Base (#27). See FIG.2.
4
4A
FIG.3 BILLIARD TABLE ASSEMBLY
8. Attach two previously-assembled Legs (#4 and #5) to the end of Billiard Cabinet(#1) using
four Bolts (#8) per Leg. See FIG.3.
9. Attach the other two previously-assembled Legs (#4 and #5) to the other end of Billiard
Cabinet(#1) but using only two Bolts (#8) on the sides of each Leg. See FIG.3.
Note: Please do not use any screws on the holes in the end apron of Billiard at this step.
The bolts will be added later for the crooked Pole (#19). See FIG.5A
10. Attach the Leg Side Panel (#6) between the inside of Left and Right Legs using four Screws
(#18) per Leg Side Panel. See FIG.3.
FIG.3
NO BOLTS THIS SIDE.
4
18
5
8
4
8
11. Lift the table assembly from the floor
with two strong adults, turn it over,
and set table on its legs in the location
where you play. Go back and make sure
that all connections are tight.
5
6
1
This is the hole for Rivet Plug (#25).
8
15
24
15
23
8
FIG.4 BASKET OF BILLIARD
TABLE ASSEMBLY
12. Attach the Corner Basket (#23)
and Side Basket (#24) to Billiard
Cabinet (#1) using two Screws (#15)
per Basket. See FIG.4
Note: Repeat the steps above for
the other baskets.
CAUTION: Two strong adults are recommended to turn the table over as shown.
1. Lift the table off the ground.
2. Turn the table over.
3. Place it on all four feet at the same time on the ground.
5
HOLD TABLE
CABINET
DO NOT
HOLD THE
LEGS
DO NOT LEAN THE
TABLE ON ITS LEGS!
Loading...