MD Sports 54804 Installation Guide

ASSEMBLYINSTRUCTIONS

INSTRUCClONESDEARMADO

Do Not Return This Product To The Store

Toll Free 877-885-1635
www.medalsports.com .tw

No devuelva este producto a su local de venta
NQmero telef6nico gratis: 877-885-1635

www.medalsports.com .tw

MODEL/MODELO: 54804

This product is covered by a limited warranty that is effective for
90 days from the date of purchase. The warranty covers any
defects in parts and workmanship.

If, during the limited warranty period, a part is found to be defective
or breaks, we will offer either a free repair or replacement part at no
cost to you, the customer. The only exceptions to the warranty incl-

ude main frames, table tops, playing surfaces, batteries, tools. The
above warranty will not apply in cases of damages due to improper

usage, alteration, mis=use, abuse, accidental damage or neglect.

A PURCHASE RECEIPT (or other proof of purchase date) will be

required before any warranty service is initiated. All requests for

warranty service can be submitted by email, in writing or by con=

tacting our Consumer Service Dept. at:

Toll Free: 877-885-1635

Email: [e-mail]

Website: www.medalsports.com.tw

This Limited Warranty gives you specific legal rights and you

may also have other rights which vary from one state (province)

to another.

PLEASE SAVE THESE INSTRUCTIONS

AND PURCHASE RECEIPT!

DO NOT RETURN THIS PRODUCT TO THE STORE!

Please Keep Your Instructions! Your Model number is necessary should you need to contact
us. Please read through this instruction manual book to familiarize yourself with all parts and

assembly steps, kindly refer to the parts identifier below and be sure that all parts have been

included.

Although we are dedicated to giving our customers the best product possible, a question

may arise or parts may be missing. If you are missing parts, or, if you have any questions,
please contact our fast and friendly service centre on :877-885-7635

Phillips Screwdriver- Not Included
Standard (Flat Head Screwdriver)- Not Included

Allen Wrench - Included

Electric Screwdrivers may be helpful during assembly; however, please set a low

torque and use extreme caution because screws may be high. stripped or over-
tightened if the electric screwdriver's torque is set too high.

1- When installing parts that have more than one bolt, hand tighten all bolts before

tightening individual bolts with a screwdriver or allen key.

2- Some figures or drawings may not look exactly like your product. Please read and

understand the text before beginning each assembly step.

OTICE!

READ AND FOLLOW ALL ASSEMBLY, OPERATION, AND SAFETY INSTRUC-

TIONS CAREFULLY. AT LEAST TWO ADULTS ARE NEEDED FOR THE ASSEMBLY
OF THIS TABLE.

THIS IS NOT A CHILD' S TOY. ADULT SUPERVISION IS REQUIRED FOR CHIL-

DREN PLAYING THIS GAME. PLEASE READ INSTRUCTIONS CAREFULLY.
PROPER USE OF THIS SET CAN AVOID DAMAGE OR INJURY.

WARNING" Adult Assembly Required.

i

WARNING"

CHOKING HAZARD - - This item contains small parts and small balls.
Not suitable for children under 3 years.

2

PARTS iDENTiFiER

#1

Billiard Cabinet

1 Piece

#7

Basketball Board

1 Piece

#13

4mm Lock Nut

4 Pieces

#19

/

#2

Hockey Table

With Table Tennis

1 Piece

#8

5/16" "1" Bolt

16 Pieces

#14

I

b

Plastic Screw

8 Pieces

#2O

#3

Backgammon With

Bowling Board

1 Piece

#9

1/4"'1-1/8" Bolt

4 Pieces

#15

F3*1/2" Screw

12 Pieces

#21

#4

Left Leg

2 Pieces

#10

4"12mm Bolt

4 Pieces

#16

P3.5*8mm Screw

4 Pieces

#22

#5

.

.

Right Leg

2 Pieces

#11

5/16" Butterfly Bolt

4 Pieces

#17

4*10mm Screw

8 Pieces

#23

#6

Leg Side Panel

2 Pieces

#12

1/4" Hex Nut

4 Pieces

#18

4"15mm Screw

16 Pieces

#24

Crooked Pole

2 Pieces

#25

§

Rivet Plug

2 Pieces

#31

Basketball

Return Net

1 Piece

#37

oooo
oooo

oooo
oooo

1.5" Pool Balls
1 Set

#43

Short Pole

2 Pieces

#26

8mm Leg Leveler

4 Pieces

#32

Allen key

1 Piece

#38

1.5" Triangle
1 Piece

#44

Side Pocket

2 Pieces

#27

Plastic Leg Base

4 Pieces

#33

Hockey Pusher

2 Pieces

#39

36" Cues

2 Pieces

#45

Corner Pocket

4 Pieces

#28

Rod Cap

2 Pieces

#34

#40

Table tennis net

#46

Felt Pad

2 Pieces

with post

1 Set

Corner Basket

4 Pieces

#29

Basketball Net

1 Piece

#35

©

Hockey Puck

2 Pieces

#41

Table-tennisBall

2 Pieces

#47

Side Basket

2 Pieces

#30

Q

Rim

1 Piece

#36

Chalk

2 Pieces

#42

©

Table Tennis Bat

2 Pieces

#48

#49

6

Bowling Pin

1 Set

Z

Chess Set

1 Set

#5O

Backgammon

&CheckerSet

©

Bowling

1 Piece

1Set

#51

Tic-Tac-Toe

1 Set

0

DiceBox

1 Piece

C;

Bean Bag

4 Pieces

#52

#53

©

Baseball

1 Piece

Football

1 Piece

#54

©

Dice

5 Pieces

Basketball

1 Piece

3

Air Pump

1 Piece

ASSEMBLY iNSTRUCTiONS

1. Find a clean, level place to begin the assembly of your Combo table. The table will be
assembled upside down and then turned over on its legs once the assembly completed.

This game table is heavy, and tuning it over will require at least two strong adults.

2. Remove all the parts from the box and verify that you have all of the listed parts as shown
on the parts identifier below. Carefully cut or tear the four corners of the box so that the

bottom of the box can be used as your work surface.

FIG."I POCKET ASSEMBLY

3. Attach the Side Pocket (#21) to the bottom of Billiard Cabinet (#1) using four Screws (#17)

per Side Pocket. See FiG. 1.

4. Attach the Corner Pocket (#22) to the bottom of Billiard Cabinet (#1) using two Screws (#18)
per Corner Pocket. See FiG. 1.

5. Repeat the steps above for the other pockets.

FIG.2 LEG ASSEMBLY

6. Attach the Plastic Leg Base (#27) to bottom of the
Left (#4) and Right(#5) Leg using two Plastic Screws

(#14) per Leg Base. See FIG.2.

7. Next, screw the Leg Leveler (#26) into the top of the
Leg Base (#27). See FIG.2.

8

17

26

14

FIG.3 BiLLiARD TABLE ASSEMBLY

8. Attach the previously-assembled Legs (#4 and #5) to the end of Billiard Cabinet(#1) using
four Bolts (#8) See FIG.&

9. Attach the Leg Side Panel (#6) between the inside of Left and Right Legs using four Screws

(#18) per Leg Side Panel. See FIG.&

10. Lift the table assembly from the floor
with two strong adults, turn it over,

and set table on its legs in the location

where you play. Go back and make sure
that all connections are tight.

FIG.4 BASKET OF BILLIARD

TABLE ASSEMBLY

11. Attach the Corner Basket (#23)

and Side Basket (#24) to Billiard
Cabinet (#1) using two Screws (#15)

per Basket. See FIG.4

24

L o

i ii _......................

15 .......

23 ......_!_ =!_

.... j

i:----iJ-J

CAUTION: Two strong adults are recommended to turn the table over as shown.

1. Lift the table off the ground.

2. Turn the table over.

3. Pace t on a four feet at the same tme on the ground.

HOLD TABLE

CABINET

DO NOT

HOLDTHE

LEGS

DO NOT LEAN THE

TABLE ONITSLEGS!