MDE P4KE100A, P4KE110, P4KE110A, P4KE12, P4KE12A Datasheet

MDE Semiconductor, Inc.

V

78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: [phone] • Fax: [phone]

P4KE SERIES

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE-6.8 TO 440 Volts

400 Watt Peak Pulse Power

FEATURES

• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O

• Glass passivated chip junction in DO-41 package

• 400W surge capability at 1ms

• Excellent clamping capability

• Low zener impedance

• Low incremental surge resistance

• Excellent clamping capability

• Fast response time: typically less than

1.0 ps from 0 volts to BV min

• Typical I

• High temperature soldering guaranteed:
300°C/10 seconds/ .375", (9.5mm) lead
length, 5lbs., (2.3kg) tension

R less than 1µA above 10V

MECHANICAL DATA

Case: JEDEC DO-41 Molded plastic
Terminals: Axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Mounting Position: Any
Weight: 0.012 ounces, 0.3 grams

DEVICES FOR BIPOLAR APPLICATIONS

For Bidirectional use C or CA Suffix for types P4KE6.80 thru types P4KE440 (e.g. P4KE6.8C, P4KE440CA)

Electrical characteristics apply in both directions.

MAXIMUM RATINGS AND CHARACTERISTICS

Ratings at 25°C ambient temperature unless otherwise specified.

Single phase, half wave, 60Hz, resistive or inductive load.

For Capacitive load, derate current by 20%

RATING SYMBOL

Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms

(NOTE 1)

Peak Pulse Current of on 10/1000 µs waveform
Steady State Power Dissipation at
Lead lengths .375", 9.5mm
Peak Forward Surge Current, 8.3ms Single Half Sine-wave

Superimposed on Rated Load,
Operatings and Storage Temperature Range Tj, Tstg -55 +175 °C
NOTES:

1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.

2. Mounted on Copper Pad area of 1.6x1.6" (40x40mm) per Fig.5.

3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.

(Note 2)

TL = 75°C

(JEDEC Method)(Note 3)

(Note 1)

Pppm

Ippm SEE TABLE 1 Amps

Pm(AV)

IFSM

ALUE UNITS

Minimum 400 Watts

1.0

40 Amps

Watts

8/6/2002

MDE Semiconductor, Inc.

78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel: [phone] • Fax: [phone]

RATING AND CHARACTERISTIC CURVES P4KE SERIES

8/6/2002