MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA. U.S.A. 92253 Tel: 760-564-8656 • Fax: 760-564-2414
1-800-831-4881 Email: sales@mdesemicondutor.com Web: www.mdesemiconductor.com
MAX™ 20 Cell Series
HIGH CURRENT TRANSIENT VOLTAGE SUPPRESSOR (TVS) DIODE
VOLTAGE - 5.0 to 150 Volts
20000 Watt Peak Pulse Power
FEATURES
• Glass passivated junction
• Bidirectional
• 20000W Peak Pulse Power
capability on 10/1000 µsec waveform
• Excellent clamping capability
• Repetition rate (duty cycle):0.05%
• Sharp breakdown voltage
• Low incremental surge resistance
• Fast response time: typically less
than 1.0 ps from 0 volts to BV
• Typical IR less than 20µA above 10V
• High temperature soldering performance.
MECHANICAL DAT
A
Terminals: Solderable per MIL-STD-750. Method 2026
Mounting Position: Any Cell
Weight: 1.49 ± 0.149g (0.053 ± 0.005 ounces)
DEVICES FOR BIPOLAR APPLICATIONS
Bidirectional use C or CA Suffix. Electrical characteristics apply in both directions.
MAXIMUM RATINGS AND CHARACTERISTIC
S
Ratings at 25°C ambient temperature unless otherwise specified.
RATING SYMBOL
V
ALUE UNITS
Peak Pulse Power Dissipation on 10x1000 µsec
waveform
Peak Pulse Current of on 10-1000 µsec waveform
Minimum 20000Pppm Watts
Ippm SEE CURVE Amps
UNIT: Inch
(mm)
0.37 ± 0.04
(9.45 ± 0.95)
0.051 ± 0.005
(1.29 ± 0.13)
8/6/2002
MAXPak™ Series Curves
3.0
4.0
150
0
1.0 2.0
tr = 10µsec.
Peak Value
I
PPM
TJ = 25°C
Pulse Width(td)is defined
as the point where the
peak current decays to
50% of I
PPM
10/1000µsec.Waveform
as defined by R.E.A.
td
Fig.3 - Pulse Waveform
4.0
50
Half Value- I
PPM
2
100
I
PPM
- Peak Pulse Current,% I
RSM
3.0
0
t - Time(ms)
10/21/2002
Loading...