MDB Family 0710 Assembly And Operation Manual

Revised 25NOV2011
page 1
Congratulations on purchasing a MDB Family product. This product will provide many years of service if you adhere to the following guidelines for assembly, maintenance and operation. This product is for residential use only. Any institutional use is strictly prohibited.
Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assem­bling the bed in addition to the Allen wrench included in the hardware box. Do not use power screwdrivers. All of our products are made from natural woods. Please understand that natural woods have color variations which are the result of nature and not defects in workmanship.
DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD­WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC VARIATIONS.
Toddler bed (0710) - Assembly and Operation Manual
Unpack and separate all parts, bolts, screws and clip angles. All holes for attachment have been pre-drilled. No drilling by the customer is necessary. Ask your store or call us for replacement of missing parts.
On the last page, record your model/item number, P.O. / lot number, date of purchase, store purchased from and the finish color for future reference.
Please read the Caution and Warning Statements
insert before using your product.
page 2
PARTS
A. Top and Bottom Bar (4)
B. Center Bar (4)
HARDWARE
J. Side Panel (2)
H1. 3” Phillips Head Bolt (8) H2. 2 -1/2” Phillips Head Bolt with Nut (12)
H5. Wood
Dowel (32)
H3. 1 -3/4” Phillips Head Bolt
with Nut (4)
H4. 3/4” Wood
Screw (6)
H6. Bracket (2)
F. Center Slat
H. Right side rail
G. Left side rail
E. Slat (12)
READ ALL INSTRUCTIONS
BEFORE ASSEMBLIN G
THE PRODUCT.
D-1. Left
Footboard
Post
C-2. Right
Headboard
Post
C-1. Left
Headboard
Post
D-2. Right Footboard
Post
Tools Needed
(not included)
Phillips
screwdriver
page 3
STEP 1.
Set up headboard and footboard.
STEP 2.
Set up bottom board.
J. Side Panel
J. Side Panel
H3H3
H3H3
F. Center Slat
E. Slat
H3H3
DO NOT OVERTIGHTEN.
E. Slat
H1
H1
H1
H1
H5
H5
A. Top and Bottom Bar
B. Center Bar
B. Center Bar
A. Top and Bottom Bar
H1
H1
H1
H1
H5
H5
A. Top and Bottom Bar
B. Center Bar
B. Center Bar
A. Top and Bottom Bar
C-2. Right
Headboard
Post
C-1. Left
Headboard
Post
D-1. Left
Footboard
Post
D-2. Right Footboard
Post
page 4
STEP 4.
Attach
side rails to
headboard and side panels.
KEEP THIS MANUAL IN A SAFE
PLACE FOR FUTURE REFERENCE.
*Check to make sure that all of the bolts are fastened
securely.
H2
H2
H6. Bracket
H6. Bracket
H4
H4
H2
H2
H2
H2
The mattress intended for use on the bed shall be a full-size crib mattress having
minimum dimensions of 51-5/8 in. (1310mm) in length, 27-1/4 in. (690mm) in width
and 4 in. (100mm) in thickness, or a greater thickness not exceeding 6 in (152mm).
STEP 3.
Attach
bottom board to
headboard and footboard.
H2
H2
H2
H2
H2
H2
DO NOT OVERTIGHTEN.
C-2
C-1D-1
D-2
Pine woods exchange moisture with the air adjusting to major changes in room temperature and humidity. Therefore, it is best to place your furniture away from heating or air-conditioning vents. Sunlight is not friendly to solid wood furniture and prolonged direct exposure to harsh sunlight can discolor the finish. Be careful not to place your furniture in direct sunlight for extended periods of time. As with all your fine furniture, blot up spills immediately.
ONE YEAR LIMITED WARRANTY:
We will replace any missing parts at the time of purchase or any defective item within a one year period from the date of original purchase. Please keep your receipt so that we may process your warranty request. This warranty only covers new units with original packaging and ownership, and is not transferable. It does not cover any used, secondhand or demo models.
This warranty does not cover any damaged or defective parts that result from installation and assembly, normal wear and tear, abuse, negli-
gence, improper use or alteration to the finish,
design, and hardware of the crib. The specific legal rights of this warranty may vary from state to state. Some states do not allow any exclusion or limitation of incidental damages. Some States do not allow limitation on how long an implied warranty lasts.
Failure to follow these warnings and the assembly instructions could result in serious injury or death from entrapment or strangulation.
Registering your product is even easier than before. You can register your product on our website at : www.themdbfamily.com
IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING PARTS PLEASE VISIT US AT:
WWW.THEMDBFAMILY.COM
OR YOU CAN CONTACT US BY MAIL:
MDB FAMILY 855 WASHINGTON BLVD. MONTEBELLO, CA 90640
HOTLINE: 1 323 728 8988
!
WARNING :
!
WARNING :
ENTRAPMENT/ STRANGULATION HAZARD
Infants have died in toddler beds from entrapment and strangulation. Failure to follow these warnings and the assembly instructions could result in serious injury or death. NEVER use bed with children under 15 months. NEVER place bed near windows where cords from blinds or drapes may strangle a child. If guard rails are used as the mattress containment means, guard rails provided must be used to avoid the formation of a gap between the mattress and the bed that could cause an entrapment. DO NOT place bed near windows where cords from blinds or drapes may strangle a child. DO NOT place items with a string, cord, or ribbon, around a child’s neck, such as a hood strings or pacifier cords. DO NOT suspend strings over a toddler bed for any reason.
revised30AUG2011
Storage:
Care and Cleaning:
Do not scratch or chip the finish. Do not use abrasive chemi­cals for cleaning. Clean with mild soap on a soft rag. Rinse and
dry thoroughly. If you ever refinish this furniture, be sure to use only a non-toxic finish specified for children’s products. If you choose to refinish this furniture, the warranty will be voided.
The intended user’s minimum age must be at
least 15 months old and maximum weight must not exceed 50 lbs (22.7 kg).
* Refer to cardboard box.
Loading...