M&C TechGroup SP2600-H-C-I-BB-F Datasheet

SP2600-H/C/I/BB/F/1K190

Embracing Challenge

Gas Sample Probe Series SP®

Version SP2600-H/C/I/BB/F/1K190 and
SP2600-H/C/I/BB/F/0,1GF190

Special Features

Filter element with particularly large



lter surface

Optimum operational reliability



Universal applicability



Adaption to nearly all process condi-



tions due to its compact and modular
design

Easy mounting and maintanance



Small volume, fast response time



Integrated possibility for back-ushing



and shut o the sample outlet

Easy operation and maintenance



Application

The probes M&C type SP2600-H/C/I/BB/F...,
based on type SP2000-H (see data sheet

2.2.2), are used for continuous gas sampling
in processes with gases of high dust content,
high temperatures and/or high humidity.

Due to the particularly large filter surface and
the possibility to back purge the filter ele­ment, this type of probes achieve a very long
service life especially in those cases where
no pre-filters can be used. For this purpose, a
back purge valve and a pneumatic isolation
valve for the measuring gas outlet are inte­grated inside the probe.

Version SP2600-H/C/I/BB/F/0,1GF is suitable
for dusts with extremely fine particles of up
to 0,1 µm grain size. Version SP2600-H/C/I/
BB/F/1K200 can be back purged very effi­ciently due to its double-ply constructed filter
element with an external filter membrane of
1 µm filter porosity.

Description

The sample probes are designed for easy
installation, reliable operation, trouble free
maintenance and a versatile application.
Depending on the application, different
sample tubes (see data sheet 2-1.1.0.6), not
included in the scope of delivery of the probe,
are screwed into the thread (G3/4”i) of the
filter housing.

The large surface filter element of ceramic
or glass fiber is placed in a housing with low
stagnant space outside the process.

The probes are constructed in such a way
that changing the filter element does not
require the sample line to be dismounted
and, therefore, the contamination of the clean
gas is avoided.

The special design of the heating element of
the SP2600... (with protective hood) permits
controlled heating of the complete filter
housing including the mounting flange up to
180 °C (Version /H320 up to 320 °C).

This ensures reliable operation external to the
process preventing the temperature falling
below the dew-point.

The temperature of the standard probe is
controlled by an integrated compact design
capillary sensor thermostat with an excess
temperature limit switch and an alarm func­tion for temperature failure in compact
arrangement directly to the probe.

Feeding the test gas is possible via an inte­grated check valve.

Additional functions of the probe SP2600­H/C/I/BB/F...:

• Calibration gas will be injected into the
probe through a check valve /C directly
to the sample outlet. No calibration gas
is lost into the stack.

• An isolation valve /I shuts off the sam­ple outlet from the internal filter area.

• Through a high flow rate check valve /
BB/F, which is fixed to the filter housing
wall, blow back of the incorporated
ceramic filter element will be done incl.
the filter area and the insitu probe tube
or the pre-filter.

Technical specications and illustrations are without
obligation, subject to modications. 03.03/02.08

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

2.5

Technical Data

Gas Sample Probe Version SP2600-H/C/I/BB/F/0,1GF190 SP2600-H/C/I/BB/F/1K190

Part No. 20S3550 20S3540

Integrated backflush via filter element

Protective cover yes

Terminal box IP54 EN60529

Filter housing material Stainless steeel 316 / 316Ti*

Sealing materials FPM*

Probe flange sealing material Novapress

Insitu probe tube/prefilter Optional

Sample pressure max. 0,4-6 bar* abs.

Ambient temperature -20 °C to +60 °C*** /PT100, /Fe-CuNi, /Ni-CrNi** = -20°C to +80°C

Filter chamber volume 280 cm

Filter element, porosity 0,1 µm 1µm

Thermostat, Temperature adjustment 0-180°C* /PT100** /Fe-CuNi** /Ni-CrNi**

Ready for operation after 40min

Low temperature alarm contact Change-over contact Contact rating: 250V, 3A~, 0,25A= Alarm point: ∆T 30°C

Sample gas outlet connection 1x 1/4“ NPTi* tube connectors ø 6, 8 or 10 mm**

Backflush/Test gas connection backflush: tube Ø 8mm, span: tube Ø 6mm

Shut off valve connection /I 1/8” NPT i

Pressure range contol air /I 3 - 10 bar

Power supply 230V 50/60 Hz, 800W /115V** = 115V 60Hz, 800W (fuse protection 10A)

Electrical connections Terminals max. 4mm2, 2x PG 13,5 cable gland

Electrical equipment standard EN 61010, EN 60519-1

Mounting flange DN65 PN6-B, SS316Ti* >DN or ANSI possible**

Weight 19kg*

* Standard
** Options
*** In case of higher ambient temperatures use option PT100 (Part No. 20S9025) or thermocouple Fe-CuNi respectively Ni-CrNi (Part No. 20S9027 resp. 20S9028) instead of the thermo-

state controller. Then, an additional electronic temperature controller (see data sheet 2-5.1) is necessary.

3

Differential pressure and T90-time

∆P and T90 at flow of: 100 200 500 1000 1500 Nl/hr

∆P with new filter element S-1K190/0,1GF190 0,007 0,011 0,02 0,035 0,040 bar

T90-time for SP2600-H.. without tube 8 5,5 3 1 <0,5 s

Versions and options (extract)

Options (Extract) Data sheet Version Part No.

Execution with power supply 115V/60Hz /115V 20 S 9030

Execution with second outlet for sample gas 1/4" NPTi* /2x* 20 S 9015

Execution with with PT00 sensor instead of the thermostat, without temp. controller /PT100 20 S 9025

Execution with thermoelement FE-CuNi ( type J ) instead of thermostat, without temp. controller /Fe-CuN 20 S 9027

Execution with thermoelement Ni-CrNi (type K) instead of thermostat, without temp. controller /Ni-CrNi 20 S 9028

Execution with second PT100 sensor /2-PT100 20 S 9026

Execution with special adapter flange size DN..PN6 or ANSI..150 lbs /DN 20 S 9004

Execution with gas pre-heater GVW1, material SS304 2-1.2.5 /GVW1 20 S 9058

Execution with connection of the gas pre-heater to valve ”BB” and to gas inlet 2-1.2.5 /GVW 20 S 9062

Execution with steam heating, without controller and valves /D 20 S 9033

2.5

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 03.03/02.08