M&C TechGroup SP2200-H-C-I-BB-F Datasheet

SP2200-H/C/I/BB( /F)

Embracing Challenge

Gas Sample Probe Series SP®

Version SP2200-H/C/I/BB and SP2200-H/C/I/BB/F

Special Features

Heated sample probe with integrated



valves for:

Calibration gas injection



Probe outlet isolation



Blow back



Description

The M&C probe SP2200-H/C/I/BB and /BB/F is

based on the standard probe SP2000-H.

Following options are included: SP2200-H...

Calibration gas connection tube connector 6 mm o.d.

Blow back gas connection tube connector 8 mm o.d.

Calibration gas injection valve /C

Isolation valve /I

Valve for blow back of the filter housing area /BB

Valve for blow back of the incorporated ceramic filter /BB/F

• Calibration gas will be injected into the
probe through a check valve /C directly
to the sample outlet. No calibration gas
is lost into the stack.

• An isolation valve /I shuts off the sample
outlet from the internal filter area.

• Through a high flow rate check valve /
BB, which is fixed to the internal probe
area, blow back of the filter housing area
and the insitu probe tube will be done.

Technical specications and illustrations are without
obligation, subject to modications. 10.04/06.06

• Through a high flow rate check valve /
BB/F, which is fixed to the filter hous­ing wall, blow back of the incorporated
ceramic filter will be done incl. the filter
area and the insitu probe tube.

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

2.3

Technical Data

(P 3-10bar)

1/4"NPT

(P >0,7bar)

1/8"NPT1/8"NPT

(P 3-10bar)(P >0,7bar)

1/4"NPT

SP2200-H/C/I/BB/F

Check valve

Isolation valve

Check valve

Tube DN6/8

Blow back in

Sample out

Flange DN65 PN6

Tube DN4/6

Cal.-gas in

Control in

Check valve

SP2200-H/C/I/BB

Control in

Sample out

Tube DN6/8

Blow back in

Isolation valve

Flange DN65 PN6

Cal.-gas in

Tube DN4/6

Check valve

SP2200-H/C/I/BB SP2200-H/C/I/BB/F

Part Number 20S2010 20S2015

Operating temperature max. 180 °C

Power supply 230V 50Hz, 800W optional 115V 60Hz

Calibration gas valve /C Check valve, cracking pressure: >0,7 bar g

Isolation valve /I Bellow valve with pneum. actuator, control pressure: 3-10 bar g connection: 1/8"NPT i

Blow back valves /BB+/BB/F High flow rate check valve, cracking pressure: >0,7 bar g, recommended: 3-6 bar g

we recommend short pressure pushes to avoid decreasing of temperature in blow back area.
Connection: tube connector 8 mm o.d.

Flange material: stainless steel 316Ti, dimensions: DN65 PN6 B

For further technical informations see data sheet 2-1.1 standard probe SP2000-H.

Dimensions

Electrically heated gas sample probe series SP

Dimensions in mm

®

2.3

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 10.04/06.06