M&C TechGroup SP210-H-W Datasheet

SP210-H

Embracing Challenge

Gas Sample Probe Series SP®

Electrically heated, compact version SP210-H / SP210-H/W

Special Features

Sampling of dust loaded process gases



Small volume, fast response time



Easy mounting and maintenance



Self-regulated electrical heater



Alarm contact for low temperature



Outdoor mounting with protective cover



Insitu probe tube optional



Application

The M&C gas sample probes version SP210-H
and SP210-H/W are applicable for continuous
gas sampling.The compact design requires
only limited space.

The gas sample probe SP210-H/W is
equipped with an extra protective cover
preferably for outdoor mounting.

Description

The design of the M&C probes version
SP210-H and SP210-H/W guarantees simple
mounting, safe operation and problem-free
maintenance.

Changing the external filter element needs
no tools and no disassembling of the sample
line. The complete filter assembly is removed
out of the probe head. This simplifies the
checkup of the filter element and the gaskets.
The filter area of the probe head respec­tively the insitu probe tube can be cleaned
very easely without dismounting the sample
probe. The large external filter element of
ceramic with 2µm porosity is heated up with
the stainless steel probe head to constant
180 °C, using a special selfregulated heating
element. This avaoids dew point problems at
the probe flange and filter area. A heat insula­tion covers all sides of the probe and ensures
an optimized heat distribution as well as safe
operation.

The power supply of the probe can be in
a range between 110V and 240V without
switching. No thermostat or temperature lim­iter are necessary.

The separate thermo switch enables a low
tem-perature monitoring (<160 °C, NO). For
electrical connection a junction box with
terminals is mounted.

The gas sample probe SP210-H/W equipped
with a protective cover with quick clamps is
recommended for outdoor-mounting.

The stainless steel insitu probe tube SP210/
SS (option) is screwed into the DN65 PN6
mounting flange.

The maximum operating temperature of the
tube out of stainless steel is 600 °C.

In case to avoid cooling and condensation of
the sample in the insitu tube from the sample
point to the heated sample probe the SP
30-H or SP 35-H heated sampling tubes can
be used.

Technical specications and illustrations are without
obligation, subject to modications. 10.04/06.06

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

2.7

Technical Data

Probe series SP® compact version SP210-H compact version SP210-H/W

Part No. 02S1000 02S1010

Protective cover YES

Degree of protection IP54 EN60529 IP55 EN60529

Insitu probe tube SS210/SS optional*, operating temperature max. 600 °C

Flow max. 500Nl/h at 600 °C

Sample pressure 0,4 to 2 bar abs.

Ambient temperature -20 °C to +60 °C

Dust load max.1 g/m

Filter chamber volume 100 ml

Filter element type S-2K, filter fineness 2 µm, ceramic

Probe heating +180 °C self-regulated

Ready for operation after 2 hours

Low temperature alarm contact, alarm point <160 °C, NO

Low temperature alarm contact, contact rating 250V-3A AC, 30V-3A DC

Connection sample outlet 1/4"-NPT inside with Swagelok tube connector ø6 x 1 mm

Power supply 110 up to 240V 50/60Hz

Power consumption start up: 400VA, usual: 100VA, (fuse 6A)

Electrical connection terminals max. 2,5 mm2, 2x PG11 cable glands

Electrical equipment standard EN 61010, EN 60335-1

Mounting flange DN65 PN6, B stainless steel 316Ti

Material of sample contacting parts stainless steel 316 / 316Ti, FPM, ceramic

Dimensions 170x220x230 mm, w x h x d 170x220x235 mm, w x h x d

Weight 6,5 kg 8,5 kg

Options

02 S 9200 Insitu probe tube out of stainless steel 316Ti type SP210/SS, connection G3/4“ o, ø 10/12, length

1 m*, incl. flange gasket.

10S9005 Calibration flange, DN65PN6 with 1/8“NPT connection inclusive flange gasket and screw set

M12x80.

* Standard, other versions on request.

3

∆P and T90 at flow of: 100 200 500 Nl/hr

∆P pressure loss with new filter element S-2K 4 7 15 mbar

T90 time with insitu probe tube SP210/SS 4,0 2,5 <1,0 sec.

Dimensionen

235

220

170

ø 160

2xPG11

Wiring

1000 230

Option: 02S9200

ø 12

100W

100W

TA-

PE

521

43

6

Dimensions in mm

2.7

Power

110-240V,50/60Hz

Temp.­Min.Alarm (NO)

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Sample out

Technical specications and illustrations are without
obligation, subject to modications. 10.04/06.06