M&C TechGroup SP2100-H Datasheet

SP2100-H

Embracing Challenge

Gas Sample Probe Series SP®

Electrically heated, compact version SP2100-H

Special Features

Sampling of dust loaded process gases



Small volume, fast response time



Self-regulated electrical heater



Alarm contact for low temperature



Insitu probe tube 1 m long



Easy mounting and maintenance



Application

The patented M&C gas sample probe ver­sion SP2100-H is used for continuous
gas sampling.

The compact design requires only limited
space. It is to be mounted in a weather-proof
position.

Description

The design of the M&C probe version
SP2100-H guarantees simple mounting, safe
operation and problem-free maintenance.

Changing the external filter element needs
no tools and no disassembling of the sample
line. The complete filter assembly is removed
out of the probe head. This simplifies the
checkup of the filter element and the gaskets.
The filter area of the probe head respec­tively the insitu probe tube can be cleaned
very easely without dismounting the sample
probe.

The large external filter element of ceramic
with 2 µm porosity is heated up with the
stainless steel probe head to constant 180°C,
using a special self-regulated heating ele­ment. This avoids dew point problems at the
probe flange and filter area.

A heat insulation covers all sides of the probe
and ensures an optimized heat distribution as
well as safe operation.

The power supply of the probe can be in
a range between 110V and 240V without
switching.

No thermostat or temperature limiter is nec­essary. The separate thermo switch enables
a low temperature monitoring (<160°C, NO).
For electrical connection a junction box with
terminals is mounted.

A one-meter stainless steel sampling tube is
provided. This is screwed into the mounting
flange. The maximum operating temperature
of the tube out of stainless steel is 600°C.

In case to avoid cooling and condensation of
the sample in the insitu tube from the sample
point to the heated sample probe the SP
30-H or SP 35-H heated sampling tubes can
be used.

The wide range of M&C probe accessories
offers various insitu probe tubes and pre-fil­ters to solve your specific sampling problem.

Technical specications and illustrations are without
obligation, subject to modications. 10.04/06.06

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

2.8

Technical Data

140

ø 160

1000

280

ø 25

sample out

sample out

Probe series SP

Part No. 10S1000

Sample tube Type SS, stainless steel 316Ti, length 1 m*

®

compact version SP 2100-H

10S1100

no

Sample temperature max. 600 °C*

Sample pressure 0.4 to 2 bar abs.

Ambient temperature -20 °C to +60 °C

Recommended for dust loadings up to 2 g/m3*

Filter chamber volume 120 ml

Filter element S-2K 150, filter porosity 2 µm, ceramic

Probe heating temperature +180 °C self-regulating

Ready for operation after 2 hours

Temperature alarm contact, alarm point <160 °C, NO

Temperature alarm, contact rating 250V-3A AC, 30V-3A DC

Connection sample outlet 1/4"-NPT inside, for max. 10 mm tube connectors

Power supply 110 up to 240V 50 / 60Hz

Power consumption start up: 400VA, usual: 100VA, (fuse 6A)

Electrical connection terminals max. 2,5 mm2, 2x PG11 cable gland

Electrical equipment standard EN 61010, EN 60335-1

Degree of protection IP54, EN 60529

Mounting flange DN65 PN6,B stainless steel 316Ti

Material of sample contacting parts SS 316 / 316Ti, FPM, ceramic

Weight 9 kg

Options

10S9005 Calibration flange, DN65PN6 with 1/8“NPT connection inclusive flange gasket and screw set

M12x80.

* Standard, other versions on request.

∆P and T90 at flow of: 100 200 500 1000 Nl/hr

∆P pressure loss with new filter element S-2K150 7 11 20 35 mbar

T90 time – without sample tube/prefilter – 6,0 3,5 1,0 < 0,5 sec

Dimensions

Dimensions in mm

2.8

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 10.04/06.06