M&C TechGroup SL1-8DN Datasheet

SL1-8 DN...

Embracing Challenge

Sample Lines Type SL1-8 DN...

for application in the gas analysis technique

Special Features

Dierent materials



Accurate to size



Dierent diameters



Application

The accurate M&C sample lines SL1-8 -... are
applicable in the gas analysis technique for
flexible respectively stationary applications,
carrying sample gas, check gas, compressed
air, exhaust gas, ventilation gas, condensate
and liquid samples. The sample lines can
be directly connected to our tube fittings,
presented in chapter 11.. of our catalogue.
The flexible tubes are available in various
dimensions and materials.

Description

The M&C sample lines SL1-8 -... can be
delivered in below mentioned lengths.
The lengths of the tube coils from 40 m can
vary by ±5 m.

The tube material and dimensions have
to be selected according to the sam­ple conditions. The technical data show
the temperature and pressure ranges of
the lines. Our leaflet 15.4 contains additional
information about delay time and differential
pressure depending on the tube dimensions,
tube lengths and the sample flow rate.

Technical specications and illustrations are without
obligation, subject to modications. 02.96/12.06

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

11.7

Technical Data

Flexible tubes Typ SL1-... Typ SL2-...

Material
Trade mark

Part-No. 01U0010 02B1000 02B2000 02B2500 02B3000 90A0055 01T1000 01T1005

Flexible tube types SL1-

Hose / Tube ø i x o (mm) 0,7 x 2,0 4 x 6 6 x 8 8 x 10 10 x 12 2 x 4 4 x 6 6 x 8

Tolerance ø / wall thickness DIN 7715-2 DIN 7715-2

Operating temperature, max. -190°C to +200°C -20°C to +180°C

Operating pressure, max.
at 20 °C (bar abs.)

Weight (g/m) 9 34 47 60 75 18 29 40

Length of the tube coil (m) 1 / 2 / 50 50 / 100 50 / 100 50 / 100 50 2 / 40 40 40

Smallest bending radius (mm) 10 40 70 100 150 30 40 70

Analysis quality, natural pure yes yes

Non adhesive surface yes no

UV-resistant yes yes

Colour white black

PTFE Polytetrafluorethylene

®

Teflon

SL1-

0,7/2

4/6

SL1­6/8

SL1­8/10

SL1­10/12

FPM Fluorcarbon-Rubber

®

VITON

SL2­2/4

SL2­4/6

SL2­6/8

0 - 11 0 - 11 0 - 9 0 - 7 0,5 - 5 0,1 - 7 0,3 - 5 0,4 - 4

Flexible tubes Typ SL3-... Typ SL4-... Typ SL5-...

Material, Trade Mark NOVOPREN

®

PVC Polyvinylchloride TYGON

®

Part-No. 01T2000 01T4000 01T4100 01T4200 01T4500

Flexible tube types SL3-

3,2/6,4

SL4­4/6

SL4­4/8

SL4­6/8

SL5­3,2/6,4

Hose / Tube ø i x o (mm) 3,2/6,4 4 x 6 4 x 8 6 x 8 1/8" x 1/4"

Tolerance ø / wall thickness DIN 7715-2 DIN 7715-2 DIN 7715-2

Operating temperature, max. -10°C to +100°C -10°C to +60°C -40°C to +70°C

Operating pressure, max.
at 20 °C (bar abs.) 0 - 11 0,4 - 7 0 - 11 0,5 - 5 0,2 - 9

Weight (g/m) 43 22 40 31 33

Length of the tube coil (m) 1 / 10 100 5 / 100 100 5 / 15

Smallest bending radius (mm) 40 40 70 70 40

Analysis quality, natural pure yes yes yes

Non adhesive surface no no no

UV-resistant yes yes yes

Colour green/gray transparent transparent

PVC-tubes are not applicable for continuous use with overpressure.

Flexible tubes Typ SL6-... Typ SL7-... Typ SL8-...

Material
Trade Mark

PFA Perfluoralkoxy PA Polyamide

NYLON® flexible

PE Polyäthylene

Part-No. 01T5000 01T6000 01T6100 01T6200 01T7000

Flexible tube types SL6-

4/6

SL7­4/6

SL7­6/8

SL7­8/10

SL8­4/6

Hose / Tube ø i x o (mm) 4 x 6 4 x 6 6 x 8 8 x 10 4 x 6

Tolerance ø / wall thickness DIN 7715-2 DIN 7715-2 DIN 7715-2

Operating temperature, max. -180°C bis +200°C -10°C to +70°C -20°C to +60°C

Operating pressure, max.
at 20 °C (bar abs.) 0 - 11 0 - 26 0 - 19 0 - 15 0 - 9

Weight (g/m) 34 17 23 30 15

Length of the tube coil (m) 25 50 50 50 50

Smallest bending radius (mm) 100 40 70 100 40

Analysis quality, natural pure yes yes yes

Non adhesive surface yes no no

UV-resistant yes yes no

Colour white milky milky

Other materials, dimensions or coloured versions are available..

To cut the tube accurately, we recommend:
Hose cutter, Part-No.: 10T1000

11.7

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 02.96/12.06