M&C TechGroup PSS-10-1 Datasheet

PSS-10/1

Embracing Challenge

Portable Gas Conditioning Unit
series PSS®

Version PSS-10/1 for 480 Nl/hr gas ow rate

Special Features

Low maintenance and self-monitoring



Outlet dew point adjustable from +2 °C



to +15 °C

Dew point stability ± 0,1 °C



Operational in 20 minutes



Compact construction



Light weight



Optimum reliability



Jet Stream heat exchangers in 3 stand-



ard materials

Universal equipment possible



Application

The portable gas conditioning unit PSS-10/1
is designed to carry out precise gas analyses
at different locations. The entire gas condi­tioning unit is housed in a robust aluminium­frame case to enable you to carry out your gas
analysis rapidly, safely and with little mainte­nance work. The PSS-10/1 gas conditioning
unit is suitable for variable, discontinuous use
as for continuous operation. The components
built into the PSS-10/1 gas conditioning unit
are envisaged for “standard use“. Obviously
our extensive Product Range provides addi­tional components.

Description

The M&C PSS-10/1 gas conditioning unit is
fitted with an two stage ECP20-2 gas cooler
which cools the sample gas to a constant +
5°C irrespective of the ambient temperature.
As soon as the operating temperature of
<+8°C is reached after start up, the gas pump
N9KPE is switched on automatically by the gas
cooler status contact. The SR 25.1 peristaltic
pumps ensures a constant condensate drain,
making long-term measurement possi­ble without problems. The corresponding
particle filtration is carried out by the FP-2T
micron filter. This all makes the portable gas
conditioning unit a complete gas condition­ing system for most gas-analysis devices.

Technical specications and illustrations are without
obligation, subject to modications. 10.96/12.11

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

14.6

Flow scheme PSS-10/1

1 Gas sample probe
2 Sample line, 3 m Viton hose
3 Gas cooler ECP 20-2
4 Fine lter FP-2T, lter porosity 2 µm
5 Gas diaphragm pump N9KPE
6 optional owmeter FM 40
7 Pre-lter PF2
8 Peristaltic pump SR25.1

Dimensions

Sample Gas IN

21

ECP20-2

7

8

+5°C

Condensate OUT

63

4

5

Dimensions in mm

power IN

sample

OUT

condensate

OUT

290

555

sample

GL 18

IN

4

3

5

8

GL 25

420

14.6

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 10.96/12.11

Technical Data

Gas Conditioning Unit series PSS® version PSS-10/1

Part No. for 230V 50Hz version 01G5000

Part No. for 115V 60Hz version 01G5000a

Sample outlet dew point range of adjustment: +2 °C ..... +15 °C, factory setting: +5 °C

Dew point stability at constant conditions < ±0,1 °C

Sample inlet temperature **max. 80 °C optional: **max.180 °C with stainless steel bulkhead union

Sample inlet dew point **max.+80 °C

Gas flow rate **max. 480 Nl/hr

Ambient temperature **+5 °C up to +40 °C

Storage temperature -25 °C up to +65 °C

Pressure 0,7 bar up to 1,4 bar abs.

Total cooling capacity **max. 80 kJ/hr

Number of gas inlets 1

Number of gas outlets 1 optional: max. 4

Medium connections tube connection 4/6 mm

Material of sample contacting parts stainless steel, glass, PVDF, Viton®, Novoprene

Ready for operation approx. 10 min.

Power supply 230V 50Hz or 115V 60Hz

Power consumption max. 350VA; with option temperature controller and heated sample line 230V: max.1730VA 115V:max. 1040VA

Fuse protection 4A t, 5x 20 mm, with option temperature controller: 6,3A t

Electrical connection Cold appliance plug with 2 m of cable

Case protection IP20 (DIN 40050. IEC 529)

Housing portable aluminium-frame case

Housing dimensions 555 mm x 460 mm x 290 mm (H x W x D)

Electrical equipment standard EN61010

Weight approx. 24 kg

®

Options Type Part No.

Further sample gas outlet Parallel samplegas outlet, tubing via T-piece on lateral PVDF bulkhead fitting, DN4/6,

01G9065

max. 4 pieces

Flowmeter, max. 4 pieces FM40 7-70 l/hr air, mounted in sample gas outlet

FM40 15-150 l/hr air , mounted in sample gas outlet
FM40 25-250 l/hr air , mounted in sample gas outlet
FM40 50-500 l/hr air, mounted in sample gas outlet

01G9070
01G9075
01G9080
01G9085

Fittings out of PVDF Fittings out of PVDF instead of PP and 3m FPM sample tube DN4/6 01G9025

Sample tube Sample tube out of Kanthal® ø 6 mm, length 1 m, sampling temperature max. 1300 °C 01G9030

Liquid alarm Liquid alarm LA 1/1.4, consisting of: liquid alarm sensor LA1, controller LA1.4, filter glass

01G9035
F120G-D with GL connection incl. mountage/wiring. In case of condensate inrush,
the sample gas pump is automatically switched of.

3-way ball valve 3L/PV-1 for switching over from test gas to sample gas, in the inlet of the sample gas

01G9046
conditioning unit, mounted with mounting brackets, fitting PVDF

5-way ball valve 5L/PV-1 for switching over from test gas to sample gas, in the inlet of the sample gas

01G9045
conditioning unit, mounted with mounting brackets, fitting PVDF

Electronic temperature con­troller for max. 12 m
heated sample line 100W/m

Electronic temperature con­troller for max. 12 m

701 control range 0-200 °C, inlet PT100, power 230V 50Hz,
Contact capacity 250V AC max. 4A, completely mounted incl.
7-pin plug 10A

701 control range 0-200 °C, inlet PT100, power 115V 60Hz,
Contact capacity 250V AC max. 4A, completely mounted incl. 7-pin plug 10A

01G9055

01G9055a

heated sample line 100W/m

Connecting adapter DN4/6 for
heated sample line

PSS-10 connecting adapter with bending protection for rigid mountage
of heated sample line with interchangeable PTFE tube DN4/6, consisting of

01G9062

stiffening plate, Swagelok fitting with 4mm cartridge, material: SS316Ti.

Connecting adapter DN6/8 for
heated sample line

PSS-10 connecting adapter with bending protection for rigid mountage
of heated sample line with interchangeable PTFE tube DN6/8, consisting of

01G9063

stiffening Swagelok fitting with 4mm cartridge, material: SS316Ti.

PP = Polypropylene
PTFE = Polytetrauoroethylene (Teon®)
PVDF = Polyvinylidenuoride
** Maximum values in technical data’s must be rated in consideration of total cooling capacity at 25 °C ambient temperature and 5 °C outlet dew point.
Other versions on request.

Technical specications and illustrations are without
obligation, subject to modications. 10.96/12.11

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

14.6