M&C TechGroup MV3-2-H Datasheet
V3/2-H
Embracing Challenge
Electrically heated valves
series V3/2-H, MV3/2-H
Version V3/2-H /PE, 3/2-way ball valve, electrically heated up
to 180 °C, Version MV3/2-H, 3/2-way solenoid valve, electrically
heated up to 180 °C
Special Features
Electrically heated up to max. 180 °C
Integrated thermostat
Status contact output
Sure connection technique
No cold bridges
Easy to maintain
Option ball valve with position identi-
cation
Application
In analysis technique, often temperatures
must be kept above the sample gas dew
point. Therefore, it is absolutely necessary to
avoid cold bridges. In order to ensure this,
the temperature regulated M&C three-way
valves V3/2-H and MV3/2 H are used for the
cut-off or switching-over of sample gases and
test gases up to an operating temperature of
180 °C.
Description
The M&C electrically heated valves are fixed
on a mounting plate, decoupled from heat
and covered with an insulated enclosure. The
heater consists of a heating element with
high capacity. The temperature is adjustable
on the integrated thermostat up to 180 °C
with high temperature limiter and low temperature alarm.
The heat insulated enclosure with a bushing
for the dial thermometer is equipped with
quick acting bentlever closures. The connection box with integrated thermostat is installed
outside the enclosure on the mounting plate.
Version V3/2-H/PE has got an additional connecting box for the contact output of the
position identification. The power supply for
the solenoid valves version MV3/2-H is 24V
DC and the additional connecting box is
installed on the mounting plate. In order
to prevent cold bridges, the connecting fittings are heated by means of thermal conducting jaws. The electrically heated sample
lines type 3/4/5-N/M/H – see data sheet
3.1 – are fixed with mounting brackets.
Technical specications and illustrations are without
obligation, subject to modications. 03.96/11.06
M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
11.3
Dimensions
Electrically heated 3/2-way ball valve, version V3/2-H
ø 6,5
320
300
330
350
Terminals
Alarm contact
min. temperature
Power in
58
Indicator
50-250°C
150
Electrically heated 3/2-way ball valve with position identification, version V3/2-H/PE
ø 6,5
left
Contact output
position switchright
Alarm contact
min. temperature
Power in
Indicator
50-250° C
320
300
Terminals
Terminals
330
350
Electrically heated 3/2-way solenoid valve, version MV3/2-H
ø 6,5
solenoid valve
24V DC 15W
currentless open
from P2 to A
Alarm contact
min. temperature
Power in
Dimensions in mm
320
300
Terminals
A
P1
P2
330
350
Terminals
58
150
Indicator
50-250°C
58
135
11.3
M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
Technical specications and illustrations are without
obligation, subject to modications. 03.96/11.06
Loading...