M&C TechGroup MP47-EX Datasheet
MP47
Embracing Challenge
Analytical Diaphragm Pump
Series MP®
Version MP47, MP47-Z, MP47../EX
Special Features
Corrosion resistant
100% lubricant free
Gas tight
Maintenance free
Diaphragm breakage monitoring pos-
sible
Long service life
Explosion proof version according to
ATEX for zone 1
Application
This diaphragm pump MP47.. is suitable for corrosive gases. It is constructed
especially for problems in the analysis technique.
Description
The pump MP47 has a PTFE-head. All sample contacting parts are made of PTFE.
The pump works absolutely lubricant free, so
gases remain analytically unchanged. Due to
a special diaphragm and valve system, the
pump operates maintenance-free.
The MP47... is available in 230V or 115V
and in execution according to ATEX
II2G for applications in hazardous areas
as well.
The standard MP47 is designed for normal applications at a maximum gas flow
of 6l/min. Up to flow rates of 17l/min we recommend the type MP47-Z.
With the option .../R a needle valve is
build into the pump-head to adjust the
flow rate.
– See data sheet 10.2. –
M&C provides for the series MP47... as option
a diaphragm breakage monitoring MP47.../D.
It is equipped with a special double-membrane safety system.
– See data sheet 10.3. –
Technical specications and illustrations are without
obligation, subject to modications. 09.96/11.06
M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
10.1
8018
200
66
110
160
34
4xM6 10 deep
G1/4"
185
ø6
71133
263
34
128
ø11
90
173
G1/4"
bar abs.
l/hr
100
200
300
400
500
600
700
800
900
0
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2 2,4 2,6 2,8 3,0
1000
MP47
MP47-Z
max.
Dimensions
Pump MP47 / MP47-Z
Dimensions in mm
Performance characteristics MP47 / MP47-Z
Pump MP47-EX with an ex-motor
Working pressure for MP47-Z is max. 2,5bar abs.
Technical Data
Diaphragm pump MP47 MP47-EX* MP47-Z MP47-Z/EX *
Part number 230V 50Hz 02 P 1000 02 P 1200 02 P 1100 02 P 1250
Part number 115V 60Hz 02 P 1000a 02 P 1200a 02 P 1100a 02 P 1250a
Degree of protection IP 20 EN 60529
II 2G EEx e, q II B T3
IP 44 EN 60529
Capacity max. 6,0 l/min without pressure
0,85 / 1,25 bar abs. on suction / pressure: 2,5 l/min
Operating pressure 0,4 to 2,2 bar abs. 0,1 to 2,5 bar abs.
Sample temperature -30 to +80 °C
Ambient temperature -10 to +40 °C
Storage temperature -15 to +60 °C
Power consumption 110W 70W 110W 70W
Current consumption 230V/115V 0,75A/1,7A 0,96A/1,91A 0,75A/1,7A 0,96A/1,91A
Gas connections G1/4" i DIN ISO 228/1
Material of sample
contacting parts
Operation mode 100% continous duty, start of the pump only without pressure
Weight 4,4 Kg 5,5 Kg 4,4 Kg 5,5 Kg
* The pumps are intended for delivering air as well as gases, vapours and mists in explosion groups II A and II B, temperature class T4
EEx e II T3 Motor 115V 60Hz or 230V 50Hz standard
EEx e II T4 Motor 230/380V 50Hz on request
10.1
M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
PTFE
IP 20 EN 60529
17 l/min without pressure
Technical specications and illustrations are without
obligation, subject to modications. 09.96/11.06
II 2G EEx e, q II B T3
IP 44 EN 60529
Loading...