M&C TechGroup MP30-EX Datasheet
MP30-EX
Embracing Challenge
Analytical Diaphragm Pump
Series MP®
Version MP30, MP30-EX
Special Features
Corrosion resistant
100% lubricant free
Gas tight
Maintenance free
Long service life
Explosion proof version according to
ATEX for zone 1
Small dimensions, high performance
Application
This diaphragm pump MP30.. is suitable for corrosive gases. It is constructed
especially for applications in gasanalysis technique.
Description
The pump MP30.. has a PVDF-head. All sample
contacting parts are made of PVDF, PTFE and
FFPM. The pump works absolutely lubricant
free, so gases remain analytically unchanged.
Due to a special diaphragm and valve system,
the pump operates maintenance-free.
The MP30... is available in 230V or 115V
and in execution according to ATEX
II2G for applications in hazardous areas
as well.
The standard MP30.. is designed for normal applications at a maximum gas flow
of 7l/min.
Technical specications and illustrations are without
obligation, subject to modications. 09.02/11.06
M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
10.6
bar abs.
l/hr
50
100
150
200
250
300
350
400
450
0
0,0 0,2 0,4 0,6 0,8 1,0 1,2 1,4 1,6 1,8 2,0 2,2 2,4 2,6 2,8 3,0
500
MP30..
max.
at const. pressure of
0,8 bar on suction side
Dimensions
Pump MP30
28.5
76.5 80
195.5
G1/8
35
G1/8
Dimensions in mm
Ø 5,5 (4x)
Performance characteristics MP30..
105
115.5
Pump MP30-EX with an ex-motor
121
120
117.5
28.5
93
77.5
191
208.5
G1/8
35
G1/8
Ø 5,5 (4x)
76
118.5
88
100
145
122
Working pressure for MP30.. is max. 2,5bar abs.
Technical Data
Diaphragm pump MP30 230V/50Hz MP30 115V/60Hz MP30-EX 230V/50Hz MP30-EX 115V/60Hz
Part number 02 P 1500 02 P 1500a 02 P 1550 02 P 1550a
Degree of protection IP 54 EN 60529
Power consumption 70W 65W 60W
Current consumption 0,45A 0,7A 0,3A 0,45A
Capacity max. 7,0 l/min without pressure
Operating pressure 0,2 to 2,5 bar abs.
Sample temperature +5 to +40 °C
Ambient temperature +5 to +40 °C
Storage temperature -15 to +60 °C
Gas connections G1/8" i DIN ISO 228/1
Material of sample contacting parts pump head: PVDF, SS316Ti, diaphragm: PTFE, valves: FFPM
Operation mode 100% continous duty, start of the pump only without pressure
Weight 3,1 Kg 3,3 Kg
10.6
M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
info@mc-techgroup.com • www.mc-techgroup.com • Fon +49 2102 935-0 • Fax +49 2102 935-111
0,9 / 2,0 bar abs. on suction / pressure side: 5 l/min
II2G EEx de, q IIB T4
IP 54 EN 60529
Technical specications and illustrations are without
obligation, subject to modications. 09.02/11.06
Loading...