M&C TechGroup Gas Sample Probes Series SP Datasheet

Sample tubes for series SP®

Embracing Challenge

Sample Tubes for
Gas Sample Probes Series SP®

with G 3/4”-connection thread

Special Features

Sampling of dust loaded process gases



Small volume, fast response time



Easy mounting and maintenance



Self-regulated electrical heater



Alarm contact for low temperature



Outdoor mounting with protective cover



Insitu probe tube optional



Application

The M&C sample tubes are used in combina­tion with the M&C gas sample probes series
SP® for point selective continuous gas sam­pling in processes with low dust loadings.

Description

The M&C probe sample tubes SP210/SS and
SP2000/... are selected according to the spe­cific applications. Influencing process param­eter are the gas composition, dust content,
water vapure saturation, temperature, pres­sure and gas velocity.

Among the standard length “L1” other lengths
up to “L max” are available on request.

For applications with low sample gas flow,
sample tubes SP2000/SS-Vm are equipped
with volume displacers to decrease the reten­tion time.

Gas sampling downstream a wet scrub­ber with a high content of water carried
out with the M&C sampling tube SP32,
equipped with an integrated demister for
liquid drop collection.

Depending on the selected material, the M&C
sample tubes are equipped with a welded
thread adapter or a support adapter. They
are partly made of different material than the
tubes, depending on fabrication. See below
table.

The connection thread enables an easy
mounting into the mounting flange of the
M&C gas sample probes.

Further sampling accessories:

For a high dust load Pre-filter V20.., V12...

For lower deviation of dew point on process
side heated sample tubes SP30, SP35.

Technical specications and illustrations are without
obligation, subject to modications. 09.96/06.11

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

2.14

Dimensions

Sample tubes Series SP

d1

®

Sample tube SP210SS / SP2000... / CR-N with welded thread connection

L1 / L max

Sample tube SP2000/ CR-2(20) /AO for >1300 C with support adapter

Sample tube SP32 with demister for gas sampling behind wet scrubber

G

EM

DEMISTER

Dimensions in mm

Technical Data

M&C Probe
sample tube
Type

SP2000/PV 20S9070 90 PVDF/ PTFE-gfr. 1000 1500 G 3/4"a 25/21 50

SP32 20S9280 90 PVDF/ PTFE-gfr. 800 800 G 3/4"a 50/44 50

SP2000/T 20S9083 160 PTFE/ PTFE-gfr. 500 500 G 3/4"a 25/15 33

SP2000/Ti 20S9075 400 Titane 1000 2500 G 3/4"a 25/22 37

SP210/SS 02S9200 600 stainl. steel 316Ti 1000 2000 G 3/4"a 12/10 37

SP2000/SS 20S9065 600 stainl. steel 316Ti 1000 2500 G 3/4"a 25/22 37

SP2000/SS-Vm 20S9067 600 stainl. steel 316Ti 1000 2500 G 3/4"a 25/06 37

SP2000/HC 20S9090 900 Hastelloy C4 1000 2500 G 3/4"a 25/22 37

SP2000/KA 20S9080 1300 Kanthal / SS 316Ti 1000 1500 G 3/4"a 27/20 37

SP2000/IN 20S9077 1100 Inconel 1100 2000 G 3/4"a 25/22 37

SP2000/CR-2* 20S9098 1400 Cr AL2 O

SP2000/CR-20* 20S9099 1400 Cr AL2 O3 / Hastelloy C4 1200 1200 G 3/4"a 22,5/13 50

SP2000/CR-N 20S9086 1400 Silicon nitride-ceramic /

SP2000/AO + ↓ 20S9385 1800 Aluminiumoxyde2) / 1000 1500 24/18

Adapter 20S9395 (600) / stainless steel 316Ti G 3/4"a 50

Adapter 20S9397 (900) / Hastelloy C4 G 3/4"a 50

Part. No. Temperature

max. °C

Material
Tube / connection part

/ Hastelloy C4 900 900 G 3/4"a 22,5/13 50

3

1.4571

Length
„L1“
mm

Length

1)

„L max“
mm

1000 on re-

quest

Connection
thread
„G“

Tube ø
o/i „d1“
mm

G 3/4"a 22/29 50

Connection
ø a „EM“
mm

* Sample tube with support adapter. Max.Temperature concern the area of the support adapter on approx. 200 mm length depend on material 600/900 °C.

1)

Standard

2)

Please pay attention to the characteristic feature of ceramic in case of high and changing temperatures!
Other materials or executions on request.
For further technical information see Sample Probes SP 210 / 2100 / 2000.

2.14

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 09.96/06.11