M&C TechGroup FT-W Datasheet

FP-W

Embracing Challenge

Wash bottle series FP®

Version FP-W, FT-W

Special Features

Chargeable with a variety of absorbents



Easy change of absorbents



Condition of liquid visible from outside



Optimum outwashing eect



Also for constant pressure upstream the



analyser

Wall mounting



Application

The F...-W wash bottle is used wherever indi­vidual components are to be washed out of
a sample gas.

A further application is the maintenance of a
constant pressure upstream of an analyser by
establishing a constant differential pressure
with respect to the atmosphere by using the
second inlet. The admission pressure depends
on the liquid level in the wash bottle and is
maximum 10 mbar.

Description

The M&C F..-W wash bottle features compo­nents from our universal filter range. The gas
passes a bubbler that intensifies the outwash­ing effect. The glass filter body enables
the examination of the absorbent without
dismantling the wash bottle. No tools are
required changing the absorbent. The opti­mal position of the O-ring guarantees the
tightness between body and head of the
wash bottle.

The wash bottle can be rotated about 180°
in the holder for wall mounting. This allows
a flexible adaptation of the in- and outlet to
local conditions.

The F..-W wash bottle is also available with an
optional GL18-6 connector at the bottom of
the glass body.

To avoid clogging of the bubbler, liquid and
particle separation should be arranged down­stream of the wash bottle.

Overpressure at the outlet or underpressure
at the inlet of the wash bottle must be
avoided. Otherwise the liquid will be dis­placed to the inlet of the wash bottle.

Technical specications and illustrations are without
obligation, subject to modications. 09.96/11.06

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

7.9

Dimensions

Wash bottle F..-W

58

42

13

G1/4" G1/4"

289

ø 5

Wash bottle FP-W-GL18, Partial view of glass
body with GL18-6 connector on the bottom

230

*

* recommended constructional size 400

Dimensions in mm

GL18-6mm connector with sealing ring for 6mm

Technical Data

Wash bottle FP-W FP-W-GL18 FT-W

Part number 03 F 5300 03F5500 03F5400

Sample contacting parts:
head part, connector,
tube, o-ring,
bubbler, glass body

Contents approx. 0,4 l

Flow rate max. 250 l/hr

Operating temperature -20 to +80 °C -20 to +100 °C

Storage temperature -30 to +110 °C -20 to +180 °C

Operating pressure max. 1 bar, at 20°C

Method of mounting wall mounting, position of mounting vertical

Absorption material standard scope of supply without absorption material

Connection G1/4" i, DIN ISO 228/1 G1/4" i, GL18-6 G1/4" i, DIN ISO 228/1

Weight 0,4 kg

PVDF
FPM
glass

PTFE
PTFE,FEP
glass

7.9

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 09.96/11.06