M&C TechGroup FT-H2 Datasheet

FT-...H2

Embracing Challenge

Electrically heated universal lter
series FT®

Version FT-...-H2, heated at 180 °C

Special Features

Electrically heated, max. 180 °C



Consequent connection technique



No cold spots



Incorporated thermostat



Status alarm



Easy maintenance



Application

The M&C electrically heated universal fil­ter reliably separates off solids, in particular
extremely fine particles, occurring in analysis
techniques in gas filtration, using very fine,
deep-acting filter elements. It is constructed
especially for hot gas analysis technique at
180 °C.

Description

The universal filter out of PTFE with integrated
filter elements (fineness 3 or 0,1 µm) is placed
in an electrically heated 2-part aluminium
oven construction.

The temperature is controlled by an inte­grated compact capillary sensor thermostat
with an excess temperature limit switch
with reset key at +30 °C above T
an alarm function for low temperature alarm
at -30 °C below TSet with voltage free status­alarm contact.

The thermostat as well as the electrical termi­nals are placed in the junction box.

The temperature of the filter is shown on a
thermometer. For isolation and protection
reasons, the heated filter part is covered
with a cap. To prevent heating interruptions,
the in- and outlet connection area is heated
too. The clamps are fixed in order to support
the sample lines. The filter in- and outlet can
be turned 180° on the oven top position to
achieve easy mounting and flexible adapta­tion to local circumstances.

SET

and

Technical specications and illustrations are without
obligation, subject to modications.10.96/11.06

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

7.4

Dimensions

58

135

Ø 6,5

75

300

280

330

350

TYP.
NR.
VOLT

To>+30°C

Tref.

0-180°C

Tu<-30°C

12 3

VA

Reset

4

6

5

87

'L

N

L

PG 13,5

Alarm contact
Temperature min.

Power
230V,50Hz
(115V,60Hz)

Dimensions in mm

Technical Data

Filter series FT

Part number 01 F 3006 01 F 3008 01 F 3007 01 F 300. -a

Filter finess / material of filter element 3 µm / glass 3 µm / stainless steel 0,1 µm / glassfibre

Max. pressure 4 bar g

Sample temperature max. 180 °C (M&C-Filters to max. 350 °C on request)

Ambient temperature max. 50 °C

Stagnant space 65 cm

Filter surface 70 cm

Power supply 230/240V 50Hz, 350VA 115V 60Hz

Electrical connection 2,5 mm2 terminals, 2x PG13 cable glands

Protection classification / electrical standard IP 44-EN60529 / EN61010, EN 60519-1

Regulation of temperature thermostat # PT100 as option #

Temperature adjustment 0-180 °C, (180 °C set in the factory)

Temperature alarm contact Alarm point: ∆T 30 °C at T

Dimension 350 x 300 x 140 mm (w x h x d)

Weight 6 kg

Method of mounting wall mounting

Sample connections G1/4" i DIN ISO 228/1

Material of sample contacting parts PTFE, glass, FPM

®

FT-3G-H2 FT-3SS-H2 FT-0,1GF-H2 Option 115V version

3

2

, contact rating: 250V, 3A*, 0,25A =

SOLL

Differential pressure in mbar with clean filter elements

7.4

60

50

40

30

20

10

Differential pressure mbar

0

0 50 100 150 200 250 300 350 400 450 500

FT-3SS-H2
FT-3G-H2
FT-0,1GF-H2

air flow in l/hr at 20 °C

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 10.96/11.06