M&C TechGroup FS-AP Datasheet

FP-AP

Embracing Challenge

Universal adsorption lter series FP®

Version FP-240-D/F, FP-120-D/F and
FP-AP, FT-AP, FS-AP for adsorption material

Special Features

Chargeable with a variety of adsorption



materials

Easy change of lling materials



Condition of lling material visible from



outside

Dierent lter materials



Wall mounting



Application

In analysis technique M&C FP-...-D/F and F..-AP
universal filters are used for the adsorption of
components which cause interferences.

Description

The M&C FP-...-D/F filter for the adsorption of
high quantities consists of the FP standard
filter head and alternatively a 200 mm glass
body for the version F-240G-D/F or a 100 mm
glass body for the version F-120G-D/F.

A filter disc separates the upper area for
adsorption material from the GL25-6 gas inlet
at the bottom of the glass body. The flow
direction is vertical from the bottom to the
filter head.

For the adsorption of low quantities, the M&C
F..-AP filter is recommended. It consists of
the FP, FT or FS standard filter head and the
screwed in F..-AP cartridge with the adsorp­tion material. The gas enters the cartridge via
borings, located at the lower part of the car­tridge surface. This ensures a maximum con­tact time between the gas and the adsorp­tion material. The way gas flows through the
adsorbtion filter avoids condensate droplets
to enter the adsorption cartridge.

The glass filter body enables the examination
of the adsorbtion material without disman­tling the filter housing. No tools are required
for changing the adsorbtion material. The
optimal position of the o-ring guarantees the
tightness between filter body and filter head.

The filter can be rotated through 180° in the
holder for wall mounting. This allows a fle­xible adaptation of the filter in- and outlet to
local conditions.

A particle fine filter should be arranged down­stream of the adsorption filter.

Technical specications and illustrations are without
obligation, subject to modications. 09.96/11.06

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

7.6

Dimensions

Universal-Filter FP-240(120)-D/F

58

42

13

G1/4" G1/4"

345
(220)

filter
disc

*

* constructional size 380 mm at FP-240-D/F

(255) mm at FP-120-D/F

Dimensions in mm

GL25

ø 5

Universal-Filter F..-AP

13

G1/4" G1/4"

182

*

* constructional size 290

58

42

ø 5

123

Technical Data

Universal filter FP-240-D/F FP-120-D/F FP-AP FT-AP FS-AP

Part number 03F5600 03F5650 03F5000 03F5200 03F5100

Material of medium contacting parts:
filter head, cartridge,
o-ring, glass body

Stagnant space 190 cm

PVDF,
FPM, glass

3

75 cm

PVDF, PVC,
FPM, glass

3

65 cm

3

PTFE, PVDF,
FEP, glass

1.4571, PVC,
FPM, glass

Operating temperature -20 to +80 °C 0 to +55 °C -20 to +80 °C 0 to +55 °C

Storage temperature -30 to +110 °C -15 to +65 °C -30 to +110 °C -15 to +65 °C

Operating pressure, at 20 °C max. 2 bar abs. max. 5 bar abs.

Operating pressure with GL-adaptor max. 5 bar abs., at 20 °C

Method of mounting wall mounting, position of mounting vertical

Adsorption material Standard scope of supply without material

Connection GL25-6, G1/4"i G1/4" i

Weight 0,5 kg 0,3 kg 0,5 kg

Selection of adsorption material

Adsorption material components in case of interruption cross sensitive against

Active charcoal vapour of solvents or essential oil SO2, CO2, CL2, NH

Stuttgarter Masse aerosols HF

Silica-gel Wasserdampf SO2, NH3, HCL, CO2, Cn H

Potassium hydroxide CO

Sodium-calcium CO

2

2

SO2, CL2, H2O

SO2, CL2, H2O

Purafill II SO2, SO3, NH3, CS2, H2S C2H2, C2H4, CH4O

3

m

7.6

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 09.96/11.06