M&C TechGroup FPF-0,1GF Datasheet

FPF-0,1GF

Embracing Challenge

Front panel mounting ne lter
series FP®

Version FPF-0,1GF

Special Features

Flat design



Low stagnant space



Simple construction



Simple assembly



Easy change of lter element



Universal usability



Application

The M&C front panel mounting extra-fine
filters reliably separate solids, in particular very
fine particles, occurring in analysis techniques
in gas filtration, using very fine, deep-acting
filter elements. The large filter surface of the
cylindrical filter element guarantees reliable
extra-fine filtration and a long service life with
low pressure drop.

The 19» front-plate mounting equipment
requires flat-design equipment for which the
FPF-0,1GF extra-fine filter has primarily been
developed.

Description

Special features of the M&C FPF-0,1GF front
panel mounting filter are flat design, low stag­nant space, simple construction and assem­bly as well as universal usability.

The condition of the filter can be seen imme­diately from outside through the filter glass
without opening the filter fitting. No tools
are needed for changing the filter element;
here, the optimum positioning of the seal­ing O-ring always guarantees reliable sealing
between filter glass and filter body.

The gas connections are located at the back
in the filter body. The inlet of the measuring
gas can be turned by 180° at the front ring
attachment so that a flexible adjustment to
local conditions is possible when assembling.

Corresponding tube connectors can be
optionally supplied.

Technical specications and illustrations are without
obligation, subject to modications. 09.96/11.06

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

7.2

1000

Dimensions

Front panel-mounting fine filter FPF-0,1

A

B

Dimensions in mm

30

A

bore-hole in frontpanel ø 50

36

ø 70

58

FPF-0,1

Open

Auf

FPF-0,1

Out Aus

G 1/8" ISO 228/1

In

Ein

ø 65

M4

B

Differential pressure in mbar in dependence on flow rate in
Nl/h air and with a new filter element.

60

50

40

30

20

10

Differential pressure in mbar

0

0 100 200 300 400 500 600 700 800 900

Flow rate in l/hr air at 20 °C

Technical Data

Front panel-mounting fine filter series FP

Part No. 04 F 1000

Filter element Glassfibre 0,1 µm (others on request)

Connections G1/8" i DIN ISO 228/1

Pressure max. 4 bar g

Sample temperature max. 80 °C

Ambient temperature max. 80 °C

Filter surface 50 cm

Dead volume 30 ml

Weight 280 g

Type of mounting Front panel mounting

Material of sample contacting parts PVDF, glass, FPM

®

version FPF-0,1

2

7.2

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 09.96/11.06