M&C TechGroup FM10 Datasheet

FM10

Embracing Challenge

Flowmeter series FM®

Version FM1, FM10

Special Features

High chemical resistance



For gases and liquids available



Easy dismantling and cleaning



Also with high precision needle valve



Also for high temperatures



Application

The M&C flowmeters – type FM1 and FM10
– which are corrosion-resistant are used for
controlling the flow in case of aggressive
gases and liquids. The flow tube is delivered
according to your specific data, e.g. medium,
temperature, pressure.

Description

The M&C flowmeters FM1 and FM10 consist
of a glass tube (the inside is conical and
becomes enlarged in the upper sector) in
which the floating ball can move.

The substance flows through the tube from
the below part to the upper part so that the
floating ball is raised. It arises a gap between
the tube wall and the substance and creates
an equilibrium. Each level of the floating ball
corresponds to a certain flow rate which is
shown on the scale.

The sealing and connecting parts are con­structively reduced and consist only of in- and
outlet connection. All medium contacted
parts are made out of PTFE and glass. The
flowmeter is configurated in such a way that it
can easily be dismantled and cleaned.

The flowmeter FM10 is equipped with a nee­dle valve in the inlet which enables you to
adjust the flow rate with high precision.

Technical specications and illustrations are without
obligation, subject to modications. 10.99/06.06

• For automatic flow control the control
unit types FA... are used. Please see sepa­rate data sheets 9.4 / 9.5 / 9.6

• For connecting the tubes, a special pro­gramme is available. Please see separate
data sheet 11.5

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

9.1

Dimensions

Flowmeter FM 1

100

7,5

25

ø 4,5

250

Flowmeter with needle valve in the inlet FM 10

GL18

ø 4,5

7,5

100

145

25

320

75

Dimensions in mm

GL18

40

G1/4"

8

8

26

40

26

43

max. 87

9.1

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 09.96/11.06