M&C TechGroup CLF-SS Datasheet

CLF-T

Embracing Challenge

Fluid Particle Filter Series CLF®

Version CLF-T, CLF-SS made out of special materials,
for removal of aerosols from gases

Special Features

High retention rate of 99,99% for parti-



cles > 0,1µm

High chemical resistance of type CLF-T



Type CLF-SS suitable for high pressure



applications

Condition of lter element CLF-T visible



from outside

Easy change of lter element



Wall mounting



Application

The M&C fluid particle filter CLF-.. is suitable
for filtration of fluid particles of all types and
is recommended for sample gases with an
acid dew point above 100 °C. Examples are
measurements in flue gas of heavy oil and
black coal combustions.

The filter separates the aerosols (very fine fluid
particles) which still pass the gas cooler. The
most effective position of the CLF-.. filter is
downstream the sample conditioning close
to the flowmeter of the analyser.

Description

The filter element of the M&C fluid particle
filter is constructed in two sections with a
flow direction from the inside to the outside
of the filter element. The inner, very fine, fibre
layer binds the fluid particles suspended in
the gas and leads them together with the gas
flow to the outer, larger layer. On their way
through the filter element, the very fine fluid
particles accumulate with others and form
droplets. The vertical flow direction and the
force of gravity cause the droplets to drip into
the filter pot.

The filter element remains fully effective even
when completely saturated with fluid. If it is
not effected by solid particles, the lifetime
is nearly unlimited. The compressed micro­fibres are made with binding of PVDF in order
to prevent influences on the sample gas.

The condition of the CLF-T filter is visible
through the glass body without opening the
filter.

The separated acid mist can continuously be
discharged with an external mounted peri­staltic pump SR25.1 or a liquid drain AD-SS
(option) connected by a GL25 or a G3/8“
adapter.

No tools are required to change the filter ele­ment. The optimised position of the O-ring
always guarantees a safe sealing of the filter
body to the filter head. The filter in- and out­let can be turned by 180 ° on the mounting
bracket to achieve easy mounting and flexible
adaption to local circumstances.

The filter is made out of PTFE/glass or stainless
steel 316Ti.

Handle with care! Danger of acid burns!

Technical specications and illustrations are without
obligation, subject to modications. 06.99/06.06

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

7.8

Dimensions

330

58
42

ø 5

13

G1/4"

L

Dimensions in mm

*

54

89

*Constructional size

Version:
Measure L:

1

Drain:

ø 70

240

GL25

1

CLF-SSCLF-T
210

G3/8"i

Technical Data

Fluid particle filter CLF-T CLF-SS

Part No. 03F2100 03F2300

Material of sample contacting parts PTFE, glass, FPM stainless steel 316Ti, FPM

Gas pressure (∆P max. 1 bar) 0,2-2 bar abs. 0,2-26 bar abs.

Gas flow max. 300 Nl/hr

Differential pressure for a
new filter element, with air, 20 °C

Sample temperature max. 100 °C

Ambient temperature 0 °C to +100 °C

Storage temperature -30 °C to +120 °C

Filter element 2-layer CLF-4

Retention rate 99,99 % for particles >0,1 µm

Filter dead volume 135 cm

Reservoir capacity for liquid 50 ml

Sample gas connection G 1/4"i DIN ISO 228/1

Drain connection GL25 cap G 3/8" plug

Type of mounting wall mounting

Weight approx. 0,8 kg approx. 2,2 kg

1 2,5 4,5 mbar
100 200 300 Nl/hr

3

7.8

M&C TechGroup Germany GmbH • Rehhecke 79 • 40885 Ratingen • Germany
[e-mail] • www.mc-techgroup.com • Fon [phone] • Fax [phone]

Technical specications and illustrations are without
obligation, subject to modications. 06.99/06.06