M&C TechGroup ADS-SS Operator's manual
Automatic liquid drain
Version AD-SS
Separator and automatic liquid drain
Version ADS-SS
AD-SS
Special Features
Save condensate removal and
separation
Completely made of stainless steel
For high pressure and temperature
applications
High drain capacity
Application
The M&C liquid drain AD-SS is used in gas
conditioning systems where condensate
must be drained after cooling the gas.
For condensate pre-separation of saturated
gas with simultaneous drainage, ADS-SS
separators and automatic liquid drains are
provided with a lateral gas connection for
additional separator functions. For functioning of the above mentioned drains overpressure is required.
Description
The AD-SS and ADS-SS automatic liquid
drains function via gravity. The casing, float,
valve and valve seat are made of stainless
steel. The outlet valve is controlled by a lever
mechanism. The float closes the condensate
outlet via the lever mechanism with the
valve tip. Due to the rising condensate level
the outlet is released by the buoyancy of
the float.
The ADS-SS separator with automatic condensate drain is a modification with an additional lateral gas connection.
3-6.2.3M
Note for operation !
The M&C automatic liquid drain AD-SS and
the separator ADS-SS have to be filled with
water before operation, because otherwise
the draining valve will remain open due to
its design!
09.96/06.06
M&C | TechGroup Germany GmbH
Rehhecke 79, D-40885 Ratingen
info@mc-techgroup.com
www.mc-techgroup.com
Fon +49 (0)2102 935-0
Fax +49 (0)2102 935-111
1
45
15
ø 70
1/2" NPT
G1/4"
185
1/2" NPT
SW 27
SW 27
ADS-SS
*
*
77
20
ø 63
ø 17
17
25ø 9
84
bar
g/cm
3
0,4
1,0
0 2,9 6,3 9,6 13 16,3 19,3
0,5
0,6
0,7
0,8
0,9
18,0
max.
Dimensions
l/h H2O
bar
0
5
10
15
20
0 225 325 400 460 525 725160 275 360 430 490 660
Separator ADS-SS
Automatic liquid drain AD-SS
Mounting clip AD-SS for wall mounting
Drain capacity depending on working pressure
Max. working pressure depending on specific gravity
*only at version ADS-SS
Dimensions in mm
Technical Data
Liquid drain AD-SS ADS-SS Mounting clip
Part number 09K3000 09K8000 90K3010
Material stainless steel 304, 316 PE
Operating temperature 0 to +200 °C -20 to +90 °C
Storage temperature -50 to +200 °C -30 to +110 °C
Operating pressure 1-19 bar abs.
Function specific gravity min. 0,5 kg/dm3, at 1 bar abs.
Capacity 160 l/hr H2O, at 1 bar abs. and 20 °C
Mounting position vertical
Condensate in 1/2" NPT i
Condensate out 1/2" NPT i
Sample gas in G1/4" i
Sample gas out 1/2" NPT i
Weight 0,8 kg 0,05 kg
2
M&C | TechGroup Germany GmbH
Rehhecke 79, D-40885 Ratingen
info@mc-techgroup.com
www.mc-techgroup.com
Fon +49 (0)2102 935-0
Fax +49 (0)2102 935-111
3-6.2.3M
Loading...