MCS MCS-B, MCS-150, MCS-200, MCS-250, MCS-500 Application Note

APP #106

Revision History

Date Author Description

APPLICATION NOTE

APP #106

01-27-15 DEW

01-28-15

01-29-15 DEW
02-10-15 DEW Updated to 3 pages
10-26-17 DEW

DEW

Created initial version
Revisions to copy, photo replaced p 4 Wiring Diagram updated
Wiring Diagram updated ver 1-29-15

Add new installation diagram/wiring for new Transducers

MCS-PRESSURE TRANSDUCER

Installation for older model

MCS-150 - MCS-200 - MCS-250

MCS-500 - MCS-667

Installation for the

following Transducers (see diagram)

MCS-150AB - MCS-200B - MCS-200BW

MCS-500B - MCS-667B

Any questions regarding this release, contact: [e-mail]

Micro Control Systems, Inc. 5580 Enterprise Parkway Fort Myers, Florida 33905

[phone] FAX: [phone] www.mcscontrols.com

Information contained in this document has been prepared by Micro Control Systems, Inc. and is copyright © protected 2017.

Copying or distributing this document is prohibited unless expressly approved by MCS.

MCS-Pressure Transducer (old style with washer)

1. PACKAGING

• Transducer with Washer

2. TRANSDUCER AND PARTS

• Transducer, black protector and washer

removed from bag

4. PRIOR TO INSTALLING ON FITTING

• Showing typical angle valve on Hanbell Screw

Compresser where Transducer will

be placed.

5. PLACEMENT OF WASHER

• Showing correct placement of washer,
make sure placement of washer is with
bevel out.

3. TRANSDUCER PARTS

• Transducer parts before installation

Black Cap
Removed

6. TRANSDUCER MOUNTED TO ANGLE VALVE

• Finished placement of MCS-TRANSDUCER

Copper
Washer

MCS-Pressure Transducer Version B

7. WIRING AND PARTS DIAGRAM (old style with washer)

8. WIRING AND PARTS DIAGRAM (New style - part # ending with ‘B’)