McGregor MET2523 Instruction manual
ORIGINAL
INSTRUCTION
MANUAL
McGregor 250W
7549540 (Model: MET2523 )
Important - Please read these
instructions fully before starting assembly
These instructions contain important information that will help
you get the best from your grass trimmer, ensuring it is assembled
correctly and safely. If you need help or have damaged or
missing parts, call the Customer Helpline on 0345 605 2065
Grass Trimmer
AFTER SALES SUPPORT
0345 605 2065
Contents
Safety information………………………..……………………………….................................……………........3
In the box…………………………….…………………………………….......................................…………….8
Assemble……………………………….…………………………………...................................……………….. 9
Prepare........................................................................................................................................11
Operate..........................................................................................................................................12
Maintenance.............................................................................................................................................15
Technical data.............................................................................................................................................16
Accessories..............................................................................................................................................17
Troubleshooting............................................................................................................................17
Environmental protection............................................................................................................................17
Getting help................................................................................................................................................18
Guarantee.................................................................................................................................................18
2
Customer helpline 0345 605 2065
Safety information
Important - Please read these instructions fully before starting assembly
Warning symbols
The following warning symbols appear throughout this
assembly manual and indicate the appropriate safety
measures you should take when assembling and
operating the grass trimmer.
This symbol indicates there is a danger of serious personal
injury or death if you do not observe the warning.
Read operator’s manual
Do not expose to rain
General safety
WARNING!
Keep this assembly manual in a safe place following assembly
for reference at a later date.
Always ensure anyone intending to operate this grass trimmer is
fully conversant with the contents of this assembly manual prior
to assembling, maintaining or operating the grass trimmer.
Perform assembly operations as described in this manual.
Failure to observe this warning may lead to serious injury, death,
or damage to the grass trimmer.
Always take care when removing the packaging to prevent
damage to you or to the grass trimmer.
IMPORTANT! Before assembling the grass trimmer, check all
the parts indicated in the manual are in the box. Inspect all the
parts for signs of damage. Do not assemble the grass trimmer if
you observe any damaged components.
Customer helpline 0345 605 2065
3
Safety information
Important - Please read these instructions fully before starting assembly
Personal safety
WARNING!
Only operate the grass trimmer if you are wearing the
correct Personal Protective Equipment (PPE) as described
in the following warnings.
Warning symbols
The following warning symbols appear throughout this assembly
manual and indicate the appropriate safety measures you should
take when assembling and operating the grass trimmer.
Read operator’s manual
Double insulation
Warning
Wear eye and ear protection
Keep bystanders away.
Disconnect the mains plug if the cord becomes damaged
or entangled
Do not expose to rain
Waste electrical products must not be disposed of with
household waste. Please recycle where facilities exist. Check
with your local authorities or retailer for recycling advice.
4
Customer helpline 0345 605 2065
Safety information
Important - Please read these instructions fully before starting assembly
General safety
WARNING!
Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric
shock, re and/or serious injury.
Save all warnings and instructions for future
reference.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
Safe operating practices
1. Training
a) Read the instructions carefully. Be familiar with the
controls and the correct use of the machine.
b) Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions to
use the machine, local regulations may restrict the age of
the operator.
c) Keep in mind that the operator or user is responsible
for accidents or hazards occurring to other people or their
property.
2. Preparation
a) Before use check the supply and extension cord
for signs of damage or aging. If the cord becomes
damaged during use, disconnect the cord from the supply
Customer helpline 0345 605 2065
5
Safety information
Important - Please read these instructions fully before starting assembly
Operational safety (continued)
immediately. DO NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY. Do not use the machine
if the cord is damaged or worn.
b) keep extension cords away from moving hazardous
parts to avoid damages to the cords which can lead to
contact with live parts.
c) Before use, always visually inspect the machine for
damaged, missing or misplaced guards or shields.
d) Never operate the machine while people, especially
children, or pets are nearby.
3. Operation
a) Keep supply and extension cords away from cutting
means.
b) Wear eye protection, long trousers and stout shoes at all
times while operating the machine.
c) Avoid using the machine in bad weather conditions
especially when there is a risk of lightning.
d) Use the machine only in daylight or good articial light.
e) Never operate the machine with damaged guards or
shields or without guards or shields in place.
f) Switch on the motor only when the hands and feet are
away from the cutting means.
g) Always disconnect the machine from the power supply
(e.g. remove the plug from the mains)
1) whenever the machine is left unattended;
2) before clearing a blockage;
3) before checking, cleaning or working on the machine;
4) after striking a foreign object;
5) whenever the machine starts vibrating abnormally.
h) Take care against injury to feet and hands from the
cutting means.
i) Always ensure that the ventilation openings are kept clear
6
Customer helpline 0345 605 2065
Loading...