McCulloch 90635 Instructions Manual
®
ASSEMBLY AND OPERATING INSTRUCTIONS
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our Web site at: http://www.harborfreight.com
Copyright 2003 by Harbor Freight Tools
®
. All rights reserved. No portion of this
manual or any artwork contained herein may be reproduced in any shape or form
without the express written consent of Harbor Freight Tools.
For technical questions, please call 1-800-444-3353.
HAND HELD VACUUM CLEANER
Model 90635
®
90635.p65 11/14/03, 10:56 AM1
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number
on the inside of the front cover. Keep this manual and invoice in a safe and dry
place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean well lit. Cluttered and dark areas inviteaccidents.
2. Do not operate electrical products in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Electrical products may create
sparks which may ignite the dust or fumes.
SKU 90635 PAGE 2
Motor 120 V, 60 Hz, 600 Watts
Overall Dimensions 10” x 5” x 7”
Cord Length 109” (15 Feet)
Hose Length 2’,4”
Weight 3.1 Lbs.
Accessories: Dust Brush, Crevice Tool, Shoulder
Strap
90635.p65 11/14/03, 10:56 AM2
ELECTRICAL SAFETY
3. Grounded products must be plugged into an outlet properly installed and
grounded in accordance with all codes and ordinances. Never remove the
grounding prong or modify the plug in any way. Do not use any adapter
plugs. Check with a qualified electrician if you are in doubt as to whether
the outlet is properly grounded. If the product should electrically malfunction
or break down, grounding provides a low resistance path to carry electricity away
from the user.
4. Double insulated products are equipped with a polarized plug (one blade is
wider than the other). This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install a polarized outlet. Do not
change the plug in any way. Double insulation eliminates the need for the
three wire grounded power cord and grounded power supply system.
5. Avoid body contact with grounded surfaces such as pipes, radiators,
ranges, and refrigerators. There is an increased risk of electric shock if your
body is grounded.
6. Do not expose power products to rain or wet conditions. Water entering a
power product will increase the risk of electric shock.
7. Do not abuse the Power Cord. Never use the Power Cord to carry the tools
or pull the Plug from an outlet. Keep the Power Cord away from heat, oil,
sharp edges, or moving parts. Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric shock.
8. When operating a power product outside, use an outdoor extension cord
marked “W-A” or “W”. These extension cords are rated for outdoor use, and
reduce the risk of electric shock.
PERSONAL SAFETY
9. Stay alert. Watch what you are doing, and use common sense when operating the Vacuum. Do not use the Vacuum while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operat-
ing the Vacuum may result in serious personal injury.
10. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts.
SKU 90635 PAGE 3
90635.p65 11/14/03, 10:56 AM3
11. Avoid accidental starting. Be sure the Power Switch is off before plugging
in. Carrying the Vacuum with your finger on the Power Switch, or plugging in
the Vacuum with the Power Switch on, invites accidents.
12. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the Vacuum in unexpected
situations.
13. Use safety equipment. Always wear eye protection. Dust mask, non-skid
safety shoes, or hearing protection must be used for appropriate conditions.
TOOL USE AND CARE
14. Do not force the Vacuum. Use the correct product for your application.
The correct product will do the job better and safer at the rate for which it is
designed.
15. Do not use the Vacuum if the Power Switch does not turn it on or off.
Any product that cannot be controlled with the Power Switch is dangerous and
must be replaced.
16. Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the Vacuum. Such
preventive safety measures reduce the risk of starting the Vacuum accidentally.
17. Store idle products out of reach of children.
18. Maintain products with care. Do not use a damaged Vacuum. Tag damaged
products “Do not use” until repaired.
19. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the Vacuum’s operation. If damaged,
have the Vacuum serviced before using. Many accidents are caused by
poorly maintained products.
SKU 90635 PAGE 4
90635.p65 11/14/03, 10:56 AM4
Loading...