ACTIVE SECURITY, ACTIVE SECURITY (IN KATAKANA), ACTIVEHELP,
ACTIVESHIELD, ANTIVIRUS ANYWARE AND DESIGN, BOMB SHELTER,
CERTIFIED NETWORK EXPERT, CLEAN-UP, CLEANUP WIZARD, CNX, CNX
CERTIFICATION CERTIFIED NETWORK EXPERT AND DESIGN, CYBERCOP,
CYBERCOP (IN KATAKANA), CYBERMEDIA, CYBERMEDIA UNINSTALLER,
DESIGN (STYLIZED N), DISK MINDER, DISTRIBUTED SNIFFER SYSTEM,
DISTRIBUTED SNIFFER SYSTEM (IN KATAKANA), DR SOLOMON’S, DR
SOLOMON’S LABEL, ENTERPRISE SECURECAS T, ENTERPRISE SECURECAST (IN
KATAKANA), EZ SETUP, FIRST AID, FORCEFIELD, GMT, GROUPSHIELD,
GROUPSHIELD (IN KATAKANA), GUARD DOG, HELPDESK, HOMEGUARD,
HUNTER, ISDN TEL/SCOPE, LANGURU, LANGURU (IN KATAKANA), M AND
DESIGN, MAGIC SOLUTIONS, MAGIC SOLUTIONS (IN KATAKANA), MAGIC
UNIVERSITY, MAGICSPY, MAGICTREE, MCAFEE, MCAFEE (IN KATAKANA),
MCAFEE AND DESIGN, MULTIMEDIA CLOAKING, NET TOOLS, NET TOOLS (IN
KATAKANA), NETCRYPTO, NETOCTUPUS, NETSCAN, NETSHIELD,
NETSTALKER, NETWORK ASSOCIATES, NETXRAY, NOTESGUARD, NUTS &
BOLTS, OIL CHANGE, PC MEDIC, PC MEDIC 97, PCNOTARY, PGP, PGP (PRETTY
GOOD PRIVACY), PRETTY GOOD PRIVACY, PRIMESUPPORT, RECOVERKEY,
RECOVERKEY - INTERNATIONAL, REGISTRY WIZARD, REPORTMAGIC,
RINGFENCE, ROUTER PM, SALESMAGIC, SECURECAST, SERVICE LEVEL
MANAGER, SERVICEMAGIC, SMARTDESK, SNIFFER, SNIFFER (IN HANGUL),
SNIFFMASTER, SNIFFMASTER (IN HANGUL), SNIFFMASTER (IN KATAKANA),
SNIFFNET, STALKER, SUPPORTMAGIC, TIS, TMEG, TNV, TVD, TNS, TOTAL
NETWORK SECURITY, TOTAL NETWORK VISIBILITY, TOTAL NETWORK
VISIBILITY (IN KATAKANA), TOTAL SERVICE DESK, TOTAL VIRUS DEFENSE,
TRUSTED MAIL, UNINSTALLER, VIREX, VIRUS FORUM, VIRUSCAN,
VIRUSSCAN, WEBSCAN, WEBSHIELD, WEBSHIELD (IN KATAKANA),
WEBSNIFFER, WEBSTALKER, WEBWALL, WHO’S WATCHING YOUR
NETWORK, WINGAUGE, YOUR E-BUSINESS DEFENDER, ZAC 2000, ZIP
MANAGER are registered trademarks of Network Associates, Inc. and/or its
McAfee Perpetual End User License Agr eement – United States of America
NOTICE TO ALL USERS: CA REFULLY READ THE FOLLOWING LEGAL AGREEMENT
("AGREEMENT"), FOR THE LICENSE OF SPECIFIED SOFTWARE ("SOFTWARE") PRODUCED
BY NETWORK ASSOCIATES, INC. ("McAfee"). BY CLICKING THE ACCEPT BUTTON OR
INSTALLING THE SOFTWARE, YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY)
CONSENT TO BE BOUND BY AND BECOME A PARTY TO THIS AGREEMENT. IF YOU DO NOT
AGREE TO ALL OF THE TER MS OF THIS AGREEMENT, CLICK THE BUTTON THAT
INDICATES THAT YOU DO NOT ACCEPT THE TERMS OF THIS AGREEMENT AND DO NOT
INSTALL THE SO FTWARE. (IF APPLICABLE, YOU MAY RETURN THE PRODUC T TO THE
PLACE OF PURCHASE FOR A FULL REFUND.)
1.License Grant. Subject to the payment of the applicable license fees, and subject to the terms and conditions of
this Agreement, McAfee hereby grants to you a non-exclusive, non-transferable right to use one copy of the
specified version of the Software and the accompanying docume ntation (the "Documenta tion"). You may instal l
one copy of t he S oftwar e on one co mpute r, w orkst atio n, pe rsona l di gita l ass istan t, pa ger, "sma rt ph one" or ot her
electronic device for which the Software was designed (each, a "Client Device"). If the Software is licensed as
a suite or bundle with more than one specified Software product, this license applies to all such specified
Software produ ct s, subject to any restri ct io ns or usage terms speci fi ed on the applicable pri ce list or product
packaging that apply to any of such Software products individually.
a.Use
b.Server-Mo de U se
c.Volume License Use
. The Software is licensed as a single product; it may not be used on more than one Client Device
or by more than one user at a time, except as set forth in this S ectio n 1. The Software is "in use" on a
Client Device when it is l oaded into th e temporary memory (i.e. , random-a ccess memory or RAM) or
installed into the permanent memory (e.g., hard disk, CD-ROM, or other storage device) of that Client
Device. This license authorizes you t o make one copy of the Software solely for backup or archival
purposes, p rovided t hat th e copy yo u make co ntains all of the Sof tware' s propri etar y notice s unalt ered
and unobstructed.
. You may use the Software on a Client Devi ce as a server ("Server") within a
multi-user or n et wor ke d en vi ronm ent (" Se rver -Mo de" ) on ly if s uch use is pe rmit te d i n the a p pl icab le
price list or product packaging for the Software. A separate license is required for each Client Device
or "seat" that may connect to the Server at any time, regardless of whether such licensed Client
Devices or seats are concurrently connected to, acces si ng or using the Software. Use of software or
hardware that reduces the number of Clie nt D evices or seats directly accessing or utilizing the
Software (e.g ., " m ultiplexing" or "pooling" softwar e or hardware) does not reduce the number of
licenses required (i.e., the required number of licenses would equal the number of distinct inputs to
the multiple xing or pooling software or hardware " front end "). If the number of Client Devices or seats
that can conn ect to th e Soft war e can exce ed th e numbe r of li censes you ha ve obt aine d, the n you mus t
have a reasonable mechanism in place to ensure that your use of the Software does not exceed the use
limits specified for the licenses you have obtained. This license authoriz es you t o make o r d ownlo ad
one copy of the Documentation for each Client Device or seat that is licensed, provided that each such
copy contains all of th e D ocumentation's propr ietary notices unalter ed and unobstructed .
. If the Software is licens ed with volume license terms s pecified in the applic able
product invoicing or product packaging for the Software, you may make, use and install as many
additional copies of the Software on the number of Client Devices as the volume license te rms specify.
You must have a reasona ble mechanism in place to ensure that the number of Client Devices on which
the Software has be en installed does not exceed the number of licenses you have obtain ed. This
license authorizes you to make or download one copy of the Documentation for each additional copy
authorized by the volume license, provided that each such copy contains all o f t he D ocumentation' s
proprietary noti ce s unaltered and unobst r u c ted.
Product Guideiii
2.Term. This Agreement is effective for an unlimited duration unless and until earlier terminated as set forth
herein. This Agreement will terminate automatically if you fail to comply with any of the limitations or other
requirements described herein. Upon any termination or expiration of this Agreement, you must cease use of the
Software and destroy all copies of t he Software and the D ocumentation.
3.Updates. For the time period specifie d in the applicable pr oduct invoicing or product packaging fo r t he
Software, you are entitled to download revisions or updates to the Softwa re when and as McAfee pub lishes them
via its electronic bulletin board system, website or through other online services. For a period of ninety (90) days
from the date of the of origin al purchase of the Softwa re, you are entitled to download one (1) revi sion or upgrade
to the Software w hen and as McAfee publishes it via its electr onic bulletin board system, website o r t hr ough
other online ser vi ces. After the speci fied time period, yo u have no further rig hts to receive any revisions or
upgrades without purchase of a new license to the Software.
4.Ownership Right s. The Software is protected by United States copyright laws and international treaty
provisions. McAfee and its supplier s own and reta in all ri ght, title and inte rest in and to the Software , includi ng
all copyrights , pat ents, trade secret rights, trademarks and other intellectual property rig ht s therein. Your
possession, installatio n, or use of the Sof tware does n ot trans fer to you a ny title to the in tellectual p roperty in the
Software, and you will not acquire any rights to the Software except as expressly set forth in this Agreement. All
copies of the Software and Documentation made hereunder must contain the same proprietary notices that appear
on and in the Software and Docum entation.
5.Restrictions. You may not sell, lease, license, re nt, loan or otherwise transfer, with or without consider ation, the
Software. McA f ee updates its Software frequently and p erformance data for its Software change. Before
conducting be nchmark tests regarding this Softw are, contact McA f ee to verify that You p ossess the correct
Software for the tes t a nd the then current version and ed ition of the Software. You agree not to permit any third
party (other than third parties under contract with You w hi ch contains nondisclosure obligations no l ess
restrictive than those set forth herein) to use the Licensed Program in any form and shall use all reasonable efforts
to ensure that no improper or unauthorized use of the Licensed Program is made. You may not permit third
parties to benefit from the use or functionality of the Software via a timesharing, service bureau or other
arrangement, except to the extent such use is specified in the applicable list price or product packaging for the
Software. You m ay not transfer any of the rights granted to you under this Agre ement. You may not reverse
engineer, decompile, or disassem bl e the Software, exc ept t o the extent the forego i ng r estriction is expressly
prohibited by ap plicabl e law. You ma y not m odify, or cre ate de rivat ive wor ks bas ed upon , the Softwa re in w hole
or in part. You may not copy the Software or Documentation except as expressly permitted in Section 1 above.
You may not remove any proprietary notices or labels on t he Software. All rights not expressly set forth
hereunder are re se rved by McAfee.
6.Warranty and Disclaimer.
a.Limited Warranty
. McAfee warrants that for sixty (60) days from the date of original purchase the
media (e.g., diskettes) on which the Software is contai ned will be free from defects in materials and
workmanship.
b.Customer Remedies
. McAfee's and its suppliers' entire liability and your exclusive remedy for any
breach of the fo regoing warran ty shall be, at McAfe e' s option, either (i) r et u r n of the purchase pri ce
paid for the license, if any, or (ii) replacement of the defective media in which the Software is
contained. You m ust return the defective media to McAfee a t yo ur expense with a copy of your
receipt. This limited warranty is void if the defect has resulted from accident, abuse, or misappl ication.
Any replacement media will be warranted for the remainder of the original warranty period. Outside
the United States, this remedy is not available to the extent McAfee is subject to restrictions under
United States export control laws and regulations.
ivMcAfee QuickClean 3.0
c.Warranty Disclaimer. Except for the limited warranty set forth herein, THE SOFTWARE IS
PROVIDED "AS IS." TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
MCAFEE DISCLAIMS ALL WARRANTIES, EI THER EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, AND NONINFRINGEMENT WITH RESPECT TO THE SOFTWARE
AND THE ACCOMPANYING DOCUMENTATION. YOU ASSUME RESPONSIBILITY FOR
SELECTING THE SOFTWARE TO ACHIEVE YOUR INTENDED RESULTS, AND FOR THE
INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM THE SOFTWARE.
WITHOUT LIMITING THE FOREGOING PROVISIONS, MCAFEE MAKES NO WARRANTY
THAT THE SOFTWARE WILL BE ERROR-FREE OR FREE FROM INTERRUPTIONS OR
OTHER FAILURES OR THAT THE SOFTWARE WILL MEET YOUR REQUIREMENTS. SOME
STATES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON IMPLIED
WARRANTIES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. The foregoing
provisions shall be enforceable to the maximum extent permitted by applicable law.
7.Limitation of Liability. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER
IN TORT, CONTRACT, OR OTHERWISE, SHALL MCAFEE OR ITS SUPPLIERS BE LIABLE TO YOU
OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR FOR ANY AND ALL
OTHER DAMAGES OR LOSSES. IN NO EVENT WILL MCAFEE BE LIABLE FOR ANY DAMAGES IN
EXCESS OF THE LIST PRICE MCAFEE CHAR GES FOR A LICENSE TO THE SOFTWARE, EVEN IF
MCAFEE SHALL HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS
LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL
INJURY TO THE EXTENT THAT APPLICABLE LAW PROHI BITS SUCH LIMITATION.
FURTHERMORE, SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION AND
EXCLUSION MAY NOT APPLY TO YOU. The foregoing provisions shall be enforceable to the maximum
extent permitted by applica ble law.
8.United States Government. Th e Software and accompanying Documentation are deemed to be "commercial
computer software" and "commercial computer software documentation," respectively, pursuant to DFAR
Section 227.7202 and FAR Section 12.212, as applicable. Any use, modification, reproduction, release,
performance, di splay or disclosure of the Software an d accompanying Documentation by the U n i t ed States
Government shall be govern ed solely b y the ter ms of this Agreement and shall b e prohibite d except t o the ex tent
expressly permitted by the terms of this Agreement.
9.Export Controls. You are advised that the Software is subject to the U.S. Export Administration Regulations.
You shall not exp ort, import or transfer Software contrary to U.S. or other applicable laws, w hether directly or
indirectly, and will not cause, app ro ve or otherwise facilitate others such as agents or any thir d par tie s in doing
so. You represen t and agrees that neit her the United States B ureau of Export Adm in is tration nor any other
federal agency has suspended, revoked or denied your export privileges. You agree not to use or transfer the
Software for end use relating to an y nuclear, chemical or biological wea pons, or missile tec hnology unless
authorized by the U.S. Government by regulation or specific license. Additionally, you acknowledge that the
Software is sub j ect to export control re gulations in the European Union and you hereby declare an d agree that
the Software will not be used for any other purpose than civil (non-military) purposes. The parties agree to
cooperate w ith eac h ot he r with re spec t to any app lic at io n f or a ny req ui re d li cen ses an d ap pr ova ls, ho wev er, yo u
acknowledge it is your ultimate responsibility to comply with any and all export and import laws and that
McAfee has no further responsibility after the initial sale to you within the original country of sale.
Product Guidev
10. High Risk Activities. The Software is not fault-tolera nt and is not designed o r in t ended for use in hazardous
environments requiring fai l-safe performa nce, including wit hout limitation, in the operation of nuclear facili ties,
aircraft navigation or communication systems, air traffic control, weapons systems, direct life-support machines,
or any other application in which the failure of the Software could lead directly to death, personal injury, or
severe physical or p ro perty damage (collec t ively, "High Risk Activ ities"). McAfee exp re ss l y di sclaims any
express or implied warranty of fitness for High Risk Activities.
11. Miscellaneous. This Agreement is governed by the laws of the United States and the State of California,
without reference to conflict of laws principles. The application of the United Nations Convention of Contracts
for the International Sal e of Goods is ex press ly excl uded. This Agreement s ets f orth all r ights fo r th e user of the
Software and is the entire agre ement bet ween the par ties. McAfee res erves th e right to peri odical ly audit you to
ensure that you are not using any Software in violation of this Agreement. During your standard business hours
and upon prior written notice, McAfee may visit you and you will make available to McAfee or its
representa tives any rec ords per tai ning t o the Soft war e to McAfee . The co st of an y requ este d audit will be solely
borne by McAfee, unless such audit discloses an underpayment or amount due to McAfee in excess of five
percent (5%) of the initial lice ns e fe e for th e Sof twar e o r you are using the Software in an unauthorized manor,
in which case you shall pay the cost of the audit. This Agreement supersedes any other communications with
respect to the Software and Docume ntation. This Agreement may not be modified e xcept by a written ad dendum
issued by a duly authorized representative of McAfee. No provision hereof shall be deemed waived unless such
waiver shall be in writing and signed by McAfee or a duly authorized representative of McAfee. If any provision
of this Agreement is held invalid, the remainder of this Agreement shall continue in full force and effect. The
parties confirm that it is their wish that this Agreement has been written in the English language only.
12. MCAFEE CUSTOMER CONTACT. If you hav e any questions concerning these term s and conditions, or if
you would like to contact McAfee for any other reason, please call (408) 988-3832, fax (408) 970-9727, or write:
Network Asso ci at es, Inc., McAfee Soft w ar e D i vision, 3965 Freedom Circle, Santa Clar a, C al i fornia 95054.
http://www.nai.com.
viMcAfee QuickClean 3.0
McAfee Perpetual End User License Agr eement – Canada
NOTICE TO ALL USERS: CA REFULLY READ THE FOLLOWING LEGAL AGREEMENT
("AGREEMENT"), FOR THE LICENSE OF SPECIFIED SOFTWARE ("SOFTWARE") BY NETWORK
ASSOCIATES INTERNATIONAL B.V. ("McAfee"). BY CLICKING THE ACCEP T BUTTON OR
INSTALLING THE SOFTWARE, YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY)
CONSENT TO BE BOUND BY AND BECOME A PARTY TO THIS AGREEMENT. IF YOU DO NOT
AGREE TO ALL OF THE TER MS OF THIS AGREEMENT, CLICK THE BUTTON THAT
INDICATES THAT YOU DO NOT ACCEPT THE TERMS OF THIS AGREEMENT AND DO NOT
INSTALL THE SO FTWARE. (IF APPLICABLE, YOU MAY RETURN THE PRODUC T TO THE
PLACE OF PURCHASE FOR A FULL REFUND.)
1.License Grant. Subject to the payment of the applicable license fees, and subject to the terms and conditions of
this Agreement, McAfee hereby grants to you a non-exclusive, non-transferable right to use one copy of the
specified version of the Software and the accompanying docume ntation (the "Documenta tion"). You may instal l
one copy of t he S oftwar e on one co mpute r, w orkst atio n, pe rsona l di gita l ass istan t, pa ger, "sma rt ph one" or ot her
electronic device for which the Software was designed (each, a "Client Device"). If the Software is licensed as
a suite or bundle with more than one specified Software product, this license applies to all such specified
Software produ ct s, subject to any restri ct io ns or usage terms speci fi ed on the applicable pri ce list or product
packaging that apply to any of such Software products individually which you acknowledge you have received
and read.
a.Use
b.Server-Mo de U se
. The Software is licensed as a single product; it may not be used on more than one Client Device
or by more than one user at a time, except as set forth in this S ectio n 1. The Software is "in use" on a
Client Device when it is l oaded into th e temporary memory (i.e. , random-a ccess memory or RAM) or
installed into the permanent memory (e.g., hard disk, CD-ROM, or other storage device) of that Client
Device. This license authorizes you t o make one copy of the Software solely for backup or archival
purposes, p rovided t hat th e copy yo u make co ntains all of the Sof tware' s propri etar y notice s unalt ered
and unobstructed.
. You may use the Software on a Client Devi ce as a server ("Server") within a
multi-user or n et wor ke d en vi ronm ent (" Se rver -Mo de" ) on ly if s uch use is pe rmit te d i n the a p pl icab le
price list or prod uc t p ack ag in g f or t he S of twar e w hic h y ou a ck now le dge y o u hav e r ec eive d and r ea d.
A separate licens e is required for each Client Device or "seat" that may connect to the Server at any
time, regardless of whether such licensed Client Devices or seats are concurrently connected to,
accessing or using t he Software. Use of sof tware or hardware th at reduces the number of Cl ie nt
Devices or seats directly accessing or utilizing the Software (e.g., "multiplexing" or "pooling"
software or hardware) does not reduce the number of licenses required (i.e., the requ i re d number of
licenses would equal the number of distinct inputs to the multiplexing or pooling software or hardware
"front end"). If the number of Client Devices or seats that can connect to the Software can exceed the
number of lice nses yo u have obt ained, then you m ust have a reasona ble mecha nism in pl ace to ensure
that your use of the Software does not exceed the use limits specified for the licenses you have
obtained. This license authorizes you to make or download one copy of the Documentation for each
Client Devi ce or sea t that i s licensed , provi ded that each such c opy cont ains all of the Doc umentati on's
proprietary noti ce s unaltered and unobst r u c ted.
Product Guidevii
c.Volume License Use. If t he Software is license d with volume license t erms specified in the applicable
price list or prod uct packaging for the S oftware, you may make, use and install as m any additional
copies of the Software on the number of Client Devices as the volume license authorizes. You must
have a reasonable mechanism in place to ensure that the number of Client Devices on which the
Software has been installed does not ex ceed the number of licenses you have obtain ed. This license
authorizes you to make or download one copy of the Documentation for each additional copy
authorized by th e volume license, pro vided that each such copy contains all of the Documentation's
proprietary notices unaltered and unobstructed.
2.Term. This Agreement is effective for an unlimited duration unless and until earlier terminated as set forth
herein. This Agreement will terminate automatically if you fail to comply with any of the limitations or other
requirements described herein. Upon any termination or expiration of this Agreement, you must cease use of the
Software and destroy all copies of t he Software and the D ocumentation.
3.Updates. For the time period specified in the applicable pr ice list or product packagin g for the Software, you are
entitled t o down lo ad re v isi ons o r u pda te s t o the So ft war e when an d as McAf ee pub lis he s t hem vi a i ts el ec tro ni c
bulletin board system, website or through othe r online services. For a period of ninety (90) days from the d at e
of the of original purchase of the Soft w ar e, you are entitled to do w nl oad one (1) revision or upgrade to the
Software when and as McAfee pub lishes it via its electronic bulletin board system, website or th rough other
online services. After the specifie d time pe rio d , yo u have no fur th er rights to receive any revisions or upgrades
without purchase of a new license to th e Software.
4.Ownership Right s. The Software is protected by United States copyright laws and international treaty
provisions. McAfee and its supplier s own and reta in all ri ght, title and inte rest in and to the Software , includi ng
all copyrights , pat ents, trade secret rights, trademarks and other intellectual property rig ht s therein. Your
possession, installatio n, or use of the Sof tware does n ot trans fer to you a ny title to the in tellectual p roperty in the
Software, and you will not acquire any rights to the Software except as expressly set forth in this Agreement. All
copies of the Software and Documentation made hereunder must contain the same proprietary notices that appear
on and in the Software and Docum entation.
5.Restrictions. You may not sell, lease, license, rent, loan or other wise transfer, with or without consid eration, the
Software. McA f ee updates its Software frequently and p erformance data for its Software change. Before
conducting be nchmark tests regarding this Softw are, contact McA f ee to verify that You p ossess the correct
Software for the test and the then current version and edition of the Software. Benchmark tests of former,
outdated or inap pr opriate versions or edi tions of the Software m ay yield results that ar e not reflective of the
performance of the current versio n or edition of the Soft ware. You agree not to permit a ny third party (other than
third parties under contract with you which contract contains nondisclosure obligations no less restrictive than
those set forth he re in) to use the Software in any form and shall use all reasonable efforts to ensur e that there is
no improper or un authorized use of the Software. You may no t permit third parties t o benefit from the use or
functionality of the Software via a timesharing, service bureau or other arrangement, except to the extent such
use is specified in the applicable list price or product packaging for the Software. You may not transfer any of
the rights grante d to you under this Agreement. You may not rev erse engineer, deco m pile, or disassemble t he
Software, exc ept to the extent the foregoing restrict io n is expressly prohibited by applicable law . T he i nt erface
information necessary to achieve intero perability of the Software with independent ly created computer programs
will be supplie d by McAfee on request and on payment of su ch r easonable costs an d expenses of McAfee in
supplying that in forma tio n . You may not modi fy, or cre at e de ri vati ve w orks ba sed up on, the So ft war e in whole
or in part. You may not copy the Software or Documentation except as expressly permitted in Section 1 above.
You may not remove or alter any proprietary notices or labels on the Software or Documentation. All rights not
expressly set forth hereunder are reserved by McAfee.
6.Warranty and Disclaimer.
viiiMcAfee QuickClean 3.0
a.Limi ted Warranty. McAfee warrants that for sixty (60) days from the date of original purchase the
media (e.g., diskettes) on which the Software is contained will be free from defects in materials and
workmanship.
b.Customer Remedies
. McAfee's and its suppliers' entire liability and your exclusive remedy for any
breach of the fo regoing warranty s hall be, at McAfee's option, either (i) re t urn of the purchase pri ce
paid for the license, if any, or (ii) replacement of the defective media in which the Software is
contained. You m us t r et ur n the defective media to M cAfee at your expense w i t h a copy of your
receipt. This limited war ranty is void if the defect has resu lted from acciden t, abuse, or misapp lication.
Any replacement media will be warran te d for the remainder of the original warranty peri od . Ou tside
the United States, this remedy is not available to the extent McAfee is subject to restrictions under
United States export control laws and reg ul at ions.
c.Warranty Disclaimer
. Except for the limited warranty set forth herein, THE SOFTWARE IS
PROVIDED "AS IS." TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,
MCAFEE DISCLAIMS ALL WARRANTIES, REPRESENATIONS AND CONDITIONS,
EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LI M ITED TO IMP LI ED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, AND NONINFRINGEMENT WITH RESPECT TO THE SOFTWARE AND THE
ACCOMPANYING DOCUMENTATION. YOU ASSUME RESPONSIBILITY FOR SELECTING
THE SOFTWARE TO ACHIEVE YOUR INTENDED RESULTS, AND FOR THE
INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM THE SOFTWARE.
WITHOUT LIMITING THE FOREGOING PROVISIONS, MCAFEE MAKES NO WARRANTY,
REPRESENTATION OR CONDITION THAT THE SOFTWARE WILL BE ERROR-FRE E OR
FREE FROM INTERRUPTIONS OR OTHER FAILURES OR THAT THE SOFTWARE WILL
MEET YOUR REQUIREMENTS. SOME STATES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON IMPLIED WARRANTIES, SO THE ABOVE LIMITATION MAY NOT
APPLY TO YOU.
7.Limitation of Liability. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER
IN TORT, CONTRACT, OR OTHERWISE, SHALL MCAFEE OR ITS SUPPLIERS BE LIABLE TO YOU
OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
GOODWILL, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR FOR ANY AND ALL
OTHER DAMAGES OR LOSSES. IN NO EVENT WILL MCAFEE BE LIABLE FOR ANY DAMAGES IN
EXCESS OF THE LIST PRICE MCAFEE CHAR GES FOR A LICENSE TO THE SOFTWARE, EVEN IF
MCAFEE SHALL HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THIS
LIMITATION OF LIABILITY SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL
INJURY TO THE EXTENT THAT APPLICABLE LAW PROHI BITS SUCH LIMITATION.
FURTHERMORE, SOME STATES AND JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR
LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THIS LIMITATION AND
EXCLUSION MAY NOT APPLY TO YOU. The foregoing provisions shall be enforceable to the maximum
extent permitted by applica ble law.
8.United States Government. The Software and accompanying Documentation are deemed to be "commercial
computer software" and "commercial computer software documentation," respectively, pursuant to DFAR
Section 227.7202 and FAR Section 12.212, as applicable. Any use, modification, reproduction, release,
performance, di splay or disclosure of the Software an d accompanying Documentation by the U n i t ed States
Government shall be govern ed solely b y the ter ms of this Agreement and shall b e prohibite d except t o the ex tent
expressly permitted by the terms of this Agreement.
Product Guideix
9.Export Controls. You have been advised that the Software is subject to the U.S. Export Administration
Regulations and applicable local export control laws. You sh all not e xport, i mport or tr ansf er Produc ts cont rary
to U.S. or other ap pl ic able local laws, whet her directly or indirectly, and will not caus e, approve or otherwise
facilitate others such as agents or any third parties in doing so. If applicable to you, you represent and agree that
neither the United States Bureau of Export Administration nor any other federal agency has suspended, revoked
or denied your export privileges. You agree not to use or transfer the Software for end use relating to any nuclear,
chemical or bi ol ogi cal wea p ons, o r mi ssi le te c hnol og y un le ss a ut hor i zed by t he U. S. Gov er nme nt a nd an y oth er
applicable local authority by regulatio n or specific license . Additionally, you acknow ledge that the Software is
subject to export con tr ol regula ti on s in the E ur opea n Uni on and you he reby decl are an d agre e th at th e Soft ware
will not be used for any other purpose than civil (non-military) purposes. The parties agree to cooperate with
each other wit h res pect to an y appl icati on fo r any re quir ed li cens es an d appr oval s, howe ver, you ac knowl edge it
is your ultimate responsibility to comp ly with any and all export and import la ws and that McAfee has no further
responsibility after the initial sale to you within the original country of sale.
10. High Risk Activities. The Software is not fault-tolerant and is not designed or intended for us e i n hazardous
environments requiring fai l-safe performa nce, including wit hout limitation, in the operation of nuclear facili ties,
aircraft navigation or communication systems, air traffic control, weapons systems, direct life-support machines,
or any other application in which the failure of the Software could lead directly to death, personal injury, or
severe physical or p ro perty damage (collec t ively, "High Risk Activ ities"). McAfee exp re ss l y di sclaims any
express or implied warranty or condition of fitness for High Risk Activities.
11. Miscellaneous. This Agreement is governed by the laws of the Netherlands. The application of the United
Nations Convention of Contracts for the International Sale of Goods is expressly excluded. Disputes with respect
to this Agreement, as well as with respect to its conclusion and execution, will be submitted exclusively to the
competent court in Amst erdam . This A greemen t sets forth al l rig hts for t he us er of t he Softwa re and is the en tire
agreement between the parties. McAfee reserves the right to periodically audit you to ensure that you are not
using any Software in violatio n of this Agreement. D uring your standard business hours an d upon prior written
notice, McAfee may visit you and you will make available to McAfee or its representatives any records
pertaining to the Software to McAfee. The cost of any requested audit will be solely borne by McAfee, unless
such audit discl oses an underpay m ent or amount due to McAfee in excess of five percent (5%) of the initial
license fee for the Software or you are using the Software in an unauthorized manor, in which case you shall pay
the cost of the audit. This Agreement supersedes any other communications with respect to the Software and
Documentation. This Agreement may not be modified except b y a written addendum i ssued by a duly authorized
representative of McAfee. No provision hereof shall be deemed waived unless such waiver shall be in writing
and signed by McAfee or a duly a uthorized representa tive of Mc Afee. I f any prov ision of this Agreemen t is h eld
invalid, the remainder of this Agreement shall continue in full force and effect. The parties have required that
this Agreement and all documents relating thereto be drawn up in English. Les parties ont demandé que cette
convention ainsi que tous les docum ents que s'y attach ent soient rédigés en anglais.
12. MCAFEE CUSTOMER CONTACT. If you hav e any questions concerning these term s and conditions, or if
you would like to contact McAfee for any other reason, please call +31 20 586 61 00 or write: McAfee,
Gatwickstraat 25, 1043 GL Amsterdam, Netherlands. You will find our Inter net web-site at http://www.nai.c om.
Junk accumulates quickly on your PC when you're surfing the Internet.
Protect your privacy and get rid of web and e-mail clutter with McAfee
QuickClean. QuickClean technology identifies and removes files that
accumulate when surfing, including cookies, e-mail, downloads, and history data that contains personal information about you. It protects your privacy by
shredding your identification data that collects on your computer.
The McAfee QuickClean product also removes unwanted programs
completely to keep yo ur PC running at pea k performance. Spe cify the files you
want to eliminate and wipe away the clutter without deleting essential
information. You can be sure that your PC is junk-free with McAfee
QuickClean.
McAfee QuickClean has a new central interface that allows you to easily
access all of the individual product components. The Home Page also
provides status information such as:
nAvailable and used space on your hard drive.
nThe last time you ran QuickClean on your computer.
1
Through the Home Page, it now also provides a single update link to
automatically update all of the installed components of McAfee QuickClean.
The Update McAfee QuickClean feature uses McAfee Instant Updater to
search for any available upd ates to your McAfee product.
What’s new in this release?
nCustom Rule Creation Wizard
McAfee QuickClean includes a rule creation wizard that allows you to
customize file cleanup. You can create a list of drives, folders, or files that
you want to clean periodically. The Custom Rule Creator helps you to
keep you computer free of junk and clean as a whistle!
Product Guide13
Welcome to McAfee QuickClean
nSpyware dete c ti o n
Spyware is a program that secretly gathers data about your Internet
surfing habits. Also known as “snooping” software, it collects
information about you and your Internet browsing habits and sends it to
third parties without your knowledge. QuickClean helps to enhance
your online privacy by rooting spyware programs and helps to ensure
you know who is watching you while you are online.
nImproved Internet cleaning
You can configure McAfee QuickClean 3.0 to automatically free your
computer of unwanted Internet clutter every time you close your
Internet browser.
nUsability enhancements
This release of McAfee QuickClean includes many user interface
enhancements to make it easier than ever to keep your computer clean.
nRun QuickClean Lite from the CD
If your computer has limited hard disk space you can still benefit from
QuickClean Lite’s ability to free valuable disk space by running
QuickClean Lite directly from your installation CD.
What’s included with McAfee QuickClean?
McAfee QuickClean uses safe and simple wizards to perform its majo r tasks.
When you use a wizard to clean up your ha rd disk or manage applications, at
each step you see exactly what you are specifying, and you can go back to
previous screens and change options if you change your mind.
Even if you are an expert computer user, wizards can autom ate tasks, s uch as
removing junk files, that would otherwise be time-consuming or error-prone.
McAfee QuickClean wizards
nRemove: Deletes any program you specify, and removes all related
shortcuts and registry entries.
nSpaceMaker: Deletes unnecessary files in specific categories until it
has freed the amount of disk space you specify.
nApplication Remnant Cleaner: Helps you remove files remaining in
your computer due to the removal of an application.
nFolder Browser: Analyzes the contents of your hard disk and
identifies folders you may wish to consider to move, remove, or
compress.
14McAfee QuickClean 3.0
Welcome to McAfee QuickClean
nOrphan Files Cleaner: Scans for and removes files without an
nDuplicate Files Cleaner: Scans your computer and enables the
removal of duplicate files from your computer.
nTemporary Internet Files (Cache) Clea ner: Frees ha rd disk space by
deleting cached (temporary Internet) Internet files.
nE-mail Cleaner: Enables the removal of e-mail messages and their
attachments from the “sent message s” and “deleted messages”
folders.
nCookies Cleaner: Removes Internet cookies from your computer.
Some Web sites store information in a small text file, called a
“cookie,” on your hard disk.
nActiveX and Plug-ins Cleaner: Enables the removal of ActiveX
(objects in a web page that provide interactive and user controllable
functions) and Plug-ins (a program that enhances the operation of a
parent program - i.e.: hear sound; view movies).
nQuickClean Lite: Deletes various kinds of junk fil es and
unconnected items on various folders such as your PC’s Internet
cache, Recycle Bin, temporary files, shortcuts and Windows registry.
nRestore: Restores deleted appl ic ati ons or f ile s if backu p cop ies we re
created. You can restore an entire application, a few files from an
application, or a few miscellaneous files, such as those deleted by
Remove or SpaceMaker—but only if backup copies were created
before the files were deleted.
nBackTrack: Monitors application installation. Lets you undo the
installation of any application if it was monitored by BackTrack.
TIP
Wizards are designed to be easy to understand and to use. Each
wizard screen tells you what you need to know and the required
information. If you want to know more about a wizard, click Help.
By default, SpaceMaker and Remove wizards create backup copies of files
before they are deleted. Although you can turn off backup creation when
you run the wizard, it is a good idea to make backups. Later, when you are
sure that you do not want to undo any actions, you can delete the backup
copy.
Product Guide15
Welcome to McAfee QuickClean
About this manual
This manual provides the basic information you need to install, set up and get
started with McAfee QuickClean. More detailed information about how to
perform tasks within McAfee QuickClean is provided via online Help. You
can get Help while working with the different windows and dialog boxes. You
can also review the Readme.txt file which contains other general information,
known issues, etc., about this product.
16McAfee QuickClean 3.0
Installing McAfee QuickClean
The setup program on your McAfee QuickClean installation CD lets you
install the program easily on your computer. Installation should start
automatically when you insert the CD into your computer’s CD-ROM drive.
The information in the following paragraphs will help you install and start
using McAfee QuickClean.
System requirements
McAfee QuickClean requires the following minimum system configuration:
nMicrosoft Windows XP Home Edition, Windows XP Professional,
Windows 2000 Professional, Windows Me, Windows NT W o rkstation,
Windows 98, or Windows 98 SE.
nInternet Explorer 4.01, Service Pack 2 or higher required, IE 5.01 or later
recommended.
nPersonal computer with a Pentium 100 MHz or higher processor.
n32 megabytes (MB) of RAM.
2
n35 MB of free hard disk space.
nCD ROM drive.
nInternet access required for various feat ures.
Installation steps
To avoid installation problems, close all open programs before you install
McAfee QuickClean, including programs that run in the background, such as
screen savers or virus checkers.
After inserting the McAfee QuickClean 3.0 installation CD into your
computer’s CD-ROM drive, an Autorun image should automatically display.
To install McAfee QuickClean software immediately, click Install McAfee
QuickClean, then skip to Step 5 to continue with Setup.
Product Guide17
Installing McAfee QuickClean
Use the steps b e low to i nst al l you r sof twa re.
1If your computer runs Windows NT, Windows 2000, or Windows XP,
2Insert th e McAfee Quic kClean 3.0 CD in to your computer’s CD- ROM
3Use the following procedure if the Autorun installation menu does not
4Here, <X> represents the drive letter for your CD-ROM drive or the path
log on to your computer as a user with administrative rights. You must
have administrative rights to install this software.
drive. If the Installation Wizard does not automatically display, go to
Step 3. Otherwise, skip to Step 4.
display, or, if you obtained your software via download at a McAfee web
site.
aFrom the Windows Start menu, select Run.
The Run dialog box displays.
bType <X>:\SETUP.EXE in the text box provided, then click OK.
to the folder that contains your extracted McAfee QuickClean files. To
search for the correct files on your hard disk or CD-ROM, click Browse.
aBefore proceeding with the installation, Setup first checks to see
whether your computer has the Microsoft Windows Installer (MSI)
utility running as part of your system software. If your computer
runs Windows XP, the current version of MSI already exists on
your system. If your computer runs an earlier Windows release,
you may still have MSI in your computer if you previously installed
other software that uses MSI. In either of these cases, Setup will
display its first wizard panel immediately. Skip to Step 5 to
continue.
5Refer to steps displayed on the Installation Wizard to complete your
18McAfee QuickClean 3.0
bIf Setup does not find MSI or an earlier version of MSI is installed
in your computer, it installs files necessary to continue the
installation, then prompts you to restart your computer. Click
Restart System. When your computer restarts, Setup will continue
from where it left off.
installation.
NOTE
If your computer does not have the required fonts to view the End
User’s License Agreement (EULA), then you may locate the
appropriate EULA o n your McAfee software installa tion CD. You
must read and agree to the terms of the agreement to complete your
installation.
Installing McAfee QuickClean
Troubleshooting installation problems
A failed installation can cause software problems that are difficult to track
down. The major causes of installation failure are:
nAttempting to install while other software is running.
nTemporary files that conflict with the installation.
nHard drive errors.
Follow the procedure outlined below to minimize the affect that these
common conditions may have on your installation.
Step 1: Close oth er soft ware
Disable all software running in the background:
1Hold down the Ctrl and Alt keys on your keyboard, and then press the
Delete key once. The Close Program dialog box appears.
2Click End Task for every item on the list except Explorer.
3Repeat steps 2 and 3 until you’ve closed everything except Explorer.
4When you see only Explorer in the Close Program dialog box, click
Cancel.
Step 2: Remove temporary fil es
Delete the contents of the Windows Temp folder:
1Double-click the My Computer icon on your desktop. The My Compute r
window opens. Double-click the C: drive. You are now viewing the
content s of yo ur hard drive.
2Double-click the Windows folder.
3In the Windows folder, double-click the Temp folder.
4In the menu, click Edit, then click Select All. All of the items in your
Temp folder are highlighted.
5Press the Delete key on your keyboard to delete the files. If Windows
asks about deleting files, click Yes.
6In the Windows taskbar, click Start, then click Shut Down.
7Click Restart the computer, then click Yes in the Shut Down Windows
dialog box to restart your PC.
Product Guide19
Installing McAfee QuickClean
Step 3: Clean your hard drive
Run the Windows hard drive utilities, ScanDisk and Disk Defragmenter to
identify and fix any error s on you r hard drive:
1Click Start on the Windows taskbar, point to Programs, then Accessories,
2In the ScanDisk window, select Standard and Automatically fix errors.
3Click Advanced. In the Advanced Settings dialog box, make sure the
4Ignore the other options, and click OK. Click Start. ScanDisk begins
5When ScanDisk is finished, close ScanDisk.
6Click Start on the Windows taskbar, point to Programs, then Accessories,
then System Tools, and click ScanDisk.
following settings are selected:
M Only if errors found
M Replace log
M Delete
M Free
scanning your drive for errors. Depending on the size of your hard drive,
ScanDisk may take several minutes to complete its job.
then System Tools, and click Disk Defragmenter.
7Click OK to start Disk Defragmenter. Depending on the speed of your
computer and the size of your drive, this may take several minutes to
complete.
8Close Disk Defragmenter when it has finished defragmenting your disk.
Removing or modifying your McAfee Q uickClean
installation
If your computer’s operating system is...
nWindows NT Wor k station
nWindows 2000 Professional
nWindows XP Home Edition
nWindows XP Professional Edition
...you must log on to your computer as a user profile with administrative
rights.
Then do the following:
20McAfee QuickClean 3.0
Installing McAfee QuickClean
1From the Windows Control Panel, start the Add/Remove applet.
2Select McAfee QuickClean and click:
M Remove to remove McAfee QuickClean from your computer.
M Change to modify your McAfee QuickClean installation.
3Refer to steps displayed on the McAfee QuickClean Installation Wizard
to complete your changes.
Restart your computer as directed by setup.
Important information about Windows XP
migration
Upgrading your computer's operating system from any version of Windows
to Windows XP causes all McAfee products installed before migration to
become disabled after migration to Windows XP.
You will be made aware of this situation as you make your first attempt to
start a McAfee product (after migration) - you will be instructed to reinstall the
product.
As such, you will need to uninstall all McAfee products and reinstall using
your installation CD or the software obtained from McAfee via download.
Product Guide21
Installing McAfee QuickClean
22McAfee QuickClean 3.0
Getting Started With McAfee
QuickClean
Introduction
The McAfee QuickClean Home Page is your central entry point to all of
McAfee QuickClean’s tasks, wizards, and components. This screen displays
three regions that provide you with dynamic information about QuickClean’s
status and navigation links to all QuickClean tasks.
Status messages
The status frame displays information about your current configuration. This
information varies based upon your computer’s operating system.
Operating systemStatus Message
Windows 98w Application Remnant Cl ean er sta t us.
w Installation Monitor status.
w Number of files stored in the BackTrack
database.
w Volume of space reclaimed by QuickClean.
All other
w Application Remnant Cl ean er sta t us.
w Volume of space reclaimed by QuickClean.
w “You are running as a limited user.”
(see NOTE)
3
NOTE
This message displays if your computer’s operating system is
Windows NT, Windows 2000, or Windows XP and you are not
logged in as the Administrator or logged in as a user with an
administrative profile. Additionally, limited user profiles do not
have access to all of QuickClean’s features.
Product Guide23
Getting Started With McAfee QuickClean
Drive information
The Drive Info frame displays current volume statistics for all of your
computer’s fixed drives.
To view volume statistics for a different fixed drive, click the Select a drive
drop-down list and select the desired drive.
24McAfee QuickClean 3.0
Screen layout
Title bar
The QuickClean interface displays most of your standard Windows elements.
That which includes:
nThe title bar displays the name of the program that you are currently
nClose and minimize buttons. The QuickClean interface is of fixed height
Tool bar
The tool bar displays four browser-like buttons that are common to all
QuickClean screens.
nBack. Click the Back button to return to the last screen you viewed.
nHome. Click this button to go from any QuickClean screen to the home
nNext. In conjunction with the Back button, use the Next to go to any
Getting Started With McAfee QuickClean
using.
and width and cannot be re-sized.
screen (Status screen).
previously visited screen during your current QuickClean session.
nHelp. Click Help to view its submenu. Help submenu items may include
any of the following:
Help submenu itemDescription
Help on this page
Contents and index
Help on the Web
McAfee at Home on the
Web
About QuickClean
w Select this submenu item to view online Help for
the screen you are currently viewing.
w Select Contents and Ind ex to vi ew online Help
for QuickClean.
w Select this submenu item to start your Internet
browser and go directly to the Mc Af ee Hel p w eb
site at McAfeehelp.com.
w Select this submenu item to start your Internet
browser and visit McAfee -a t-H om e.com
w Click About to view version information about
QuickClean.
Product Guide25
Getting Started With McAfee QuickClean
The Task pane
The Task pane displays links that allow you to start McAfee QuickClean’s
primary Tasks and Advanced Tasks. The Task pane also displays links to
RelatedTasks; and McAfee links to start the home pages of any other current
McAfee product installed in your computer.
If you select an item in the work space of a wizard, cleaning, or analysis screen,
then the Details or properties describing the item you’ve selected displays in
the task pane. For tasks that require severa l steps t o complete, a ta sk Progress
indicator displays in the Task pane as well.
About Tasks
Starting a task is as easy as clicking its link. The Task list allows you to start
QuickClean’s major components. Although the tasks you can perform will
vary based upon your computer’s operating system and its configurat ion,
primary tasks include:
nStart QuickC lean Lite.
QuickClean Lite scans your computer for files cluttering your hard disk.
Here you can choose to keep, delete, or shred the files.
nFind non-critical files to remove from your computer.
This task starts the SpaceMaker wizard. SpaceMaker help s you scan you
scan your computer for junk, non-critical, multimedia, and old data files.
SpaceMaker is the wizard that allows you to run any custom rules that
you created.
nRemove a program from your computer.
After updating the SmartLinks database, select the program you want to
remove from your computer. You can chose to backup the program,
where to save the backup archive, or delete it completely.
About Advanced Tasks
Advanced tasks are not necessarily complex in nature. If you are at ease with
adding and removing programs from your computer; or you have a good
comfort level with general file maintenance, you should not experience any
difficulties performing most of QuickClean’s Advanced tasks.
Similar to the primary Task list, the Advanced task list may vary depending
upon your version of Windows, its configuration, and other software that may
be installed in your computer.
For example:
26McAfee QuickClean 3.0
Getting Started With McAfee QuickClean
nClean my hard drive.
This Advanced task takes you Clean my hard drive screen. Here you can
perform various scanning operations, customize cleanup rules, and
perform program maintenance.
nRemove Internet files.
Select this task to start any of the Internet Cleanup wizards - the Browser
Cache, Cookie, E-mail, ActiveX and Plug-in, and Privacy Check cleaners.
Refer to the on-screen instructions to guide you through the wizards.
nManage programs installed in my computer.
This Advanced task takes you to the Manage installed p rograms screen.
Here you can choose to run the Arc hive, Monitor, Back Track, an d
Restore wizards. If you removed an application (a program) from your
computer, you can clean up the program’s remnants from this scr een as
well.
nPerform Advanced cleaning tasks...
... such as cleaning your computer’s registry and remove duplicate or
orphan (incomplete applications) files from your computer.
CAUTION!
Advanced cleaning tasks such as cleaning your computer’s
registry, removing duplicate files, and removing incomplete
applications cou ld adversely affect your computer’s performance if
they are not used properly. Please exercise caution as you select the
files of these types that you want to remove from your computer.
nView my QuickClean activity logs.
Select this task to view the View my QuickClean activity logs screen.
Here you can choose to view, open, and print reports and logs such as
the Summary Report, the Activity Logs, the Disk Space Freed by
Category and the Number of Files Deleted by Category Reports.
nClick the Change my QuickClean settings task to view the “Pick the
type of settings to change screen.” On this screen click the corresponding
link to configure QuickClean’s General, ARC, Monitor, Folder,
Advanced and Internet Cleanup settings.
About Related Tasks
The Related Tasks list displays of there is a task that is very similar in nature
to the task you are performing. For example:
M Setting date restrictions for files scanned by SpaceMaker.
Product Guide27
Getting Started With McAfee QuickClean
M A Quick jump link to SpaceMaker to run a custom rule.
If you are performing a task that has no related tasks, the Related Task list does
not display.
About Details
If you select a particular fil e type or group that QuickClean s cans. Details
include:
M File types and associations.
M Description of a cleaner’s function.
About McAfee
The McAfee list displays links that allows you to start any other currently
supported McAfee product.
28McAfee QuickClean 3.0
Managing Programs To Free Disk
Space
Introduction
The QuickClean wizards that manage applications are simple and extremely
safe. They will not damage your computer or destroy data by removing
important operating system files or files required by any application except
the one you are removing, archiving, or moving.
To use a QuickClean wizard you must have enough free disk space on your
computer for the wizard to work in and enough space to store any backup
copies of files or applications that the wizard may make. Even though a
backup is compressed to its smallest possible size, it will take up some space
on your hard drive.
From the QuickClean Home page, you can access any of these available
application management tasks. Select from the primary tasks to access the
component wizards. Any of these wizards opens and guides you through
three or four quick steps to perform the action.
What is the Smartlinks Database?
The Smartlinks Database captures and stores information about the
relationship between files on your compute r. It stores the names and locations
of all files needed by the operating system. For each application, the
Smartlinks Database stores information about all of the files that the
application needs to run properly, including icons, dynamically linked
libraries (DLLs), and other executable files, as well as operating system files
that are used by the application. This information makes the Smartlinks
Database a comp l ete, cross-referenc ed record of how exec utable and system
files are used on your computer.
4
It is this information that makes using QuickClean quick and safe. It ensures
that applications can be completely moved and deleted.
This information also helps to determine the files that can be safely deleted
without damaging an application or your computer’s operating system.
Product Guide29
Managing Programs To Free Disk Space
Remove a program using Remove
The Remove wizard gets rid of all traces of the application, including shortcuts
and registry entries. If the application has associated data files, you can
remove those at the same time if you want to. If QuickClean detects that an
application has an uninstall program of its own, you will be given the choice
to use the application’s uninstall program or the QuickClean Remove wizard.
Choose the Remove wizard to completely remove:
nAn application that you no longer use.
As you buy new programs, old programs become obsolete or no longer
useful. The Remove wizar d keeps your c omputer up-to- date by deleting
all old applic ations and cleaning up the Registry and operating system
settings associated with them.
nA demo applica tion that you do wnloaded and de c ided not to purcha se.
Demo applications usually cannot be used after a specified date, but they
still remain on your disk, taking up space. Use the Remove wizard to
clean them up.
nAn application that you want to reinstall because it is behaving
incorrectly.
Sometimes reinstalling a program from scratch fixes minor problems.
The Remove wizard can uninstall the program and remove all references
to it in the Registry and operating system files so that you can perform a
clean reinstallation.
Make sure that you let the Remove wizard create a backup copy of the
application before it is removed. Then you can restore it if you change your
mind in a few minutes or a few days later. When you are sure that you do not
need the backup, delete it to free disk space.
Remove application remnants using ARC
Application Remnant Cleaner (ARC) is a program-cleaning feature of
QuickClean used after uninstalling a program. ARC enables you to free disk
space and delete unnecessary program files from your computer.
To remove a program from your computer, you will most likely use one of two
methods. One common method is to access the Add/Remove Programs
Properties dialog box in the Windows Control Panel, select the application
and click Add/Remove. The other method is to delete the program using the
program's uninstallation wizard.
30McAfee QuickClean 3.0
Managing Programs To Free Disk Space
Both methods usually remove most program files associated with the
application. However, documents created with and linked to the program
may remain after uninstallation.
Application remnant cleaner detects a program's uninstallation. When the
program's uninstallation is complete, a list of files not removed from your
computer associated with the program displays. At such time, you may
choose to delete, shred, recycle, compress, or move the remnant files or
documents created with the program to a different location.
Application Remnant Cleaner settings
ARC, by default, is configured to run automatically when you uninstall a
program. To configure this setting:
1From the Ad vanced Tasks list, select Change my QuickC lean settings.
2Click Application Remnant Cleaner.
3From the ARC settings window check or clear the Run Application
Remnant Cleaner automatically when uninstalling check box to set your
preference.
Analyze folders using Folder Browser
"Folder Browser" is a feature used to analyze the volume of the contents of
drives, directories, subdirectories, and folders within your computer's hard
disk. You may use this information to identify folders and their contents that
are candidates for removal.
Folder Browser displays information in a format similar to that of Windows
Explorer. There are two panes. The lef t pane displays a tree view of the folders
within your computer. The right pane displays the contents of the folder
selected in the left pane.
The right pane provides the following information:
nName: The name(s) of the folder(s) within the selected drive, directory,
or subdirectory.
nSize: The volume of the folder; including immediate files.
nTotal Size: The total volume of the folder including immediate/direct
files, sub-folders and the contents of the sub-folders.
nThe units of measurement are bytes, kilobytes (Kb), and Megabytes
(Mb).
It is possible for a folder to have a size of zero and a total size greater than zero.
This situation demonstrates that folder contains sub-folders but no immediate
files.
Product Guide31
Managing Programs To Free Disk Space
Archiving a program using Archive
Use the Archive wizard to create a compressed backup copy, called an archive,
of an application and remove it from your computer until you need it again.
After the Archive wizard creates the compressed archive file, it removes the
application from the folder where it was installed, but leaves the shortcuts to
the application in place. When you click a shortcut to the application in the
Windows Start menu Programs list, or on your Windows desktop, taskbar, or
elsewhere, a message box appears, explaining that UnInstaller has archived
the application and asking if you would like to restore it.
NOTE
You can also use the Restore wizard to restore archived
applications.
Choose the Archive wizard if you:
nWant to store useful applications that you rarely use.
If you have old games or specialized programs, archive them to free disk
space, but keep the shortcuts and other entry points availa ble from your
desktop. QuickClean keeps track of applications that you have archived.
Their shortcuts and Start menu Programs list entries remain in place. If
you click a shortcut or Programs list entry for an archived application,
you can choose whether to restore the application.
nThink you might need an application again.
If you are not sure that you want to get rid of an application entirel y,
instead of using the Remove wizard and creating a backup file, use the
Archive wizard and retain information.
nWant to free space on your computer by removing an application
temporarily.
If you need disk space to perform a task that requires a large amount of
temporary space, for example, you can archive applications to free the
space. Then you can quickly restore the applications when you no longer
need their disk space.
Monitoring a program’s installation using
BackTrack
The BackTrack wizard can restore your system to the state it was in before you
installed a monitored application.
32McAfee QuickClean 3.0
Managing Programs To Free Disk Space
NOTE
You must be running Windows 98 or Windows 98 SE in order to
use the QuickClean BackTrack feature.
You can use the QuickClean Installation Monitor to watch applications as they
install making a record of every file that was added, deleted, or changed
during installation. Then, you can use the BackTrack wizard to completely
remove the monitored application from your computer and return all settings
to their previous values before the application was installed. You can set up
Installation Monitor in one of two ways:
nSet up BackTrack Monitor to run in the background continuously,
waiting for you to run an installation file with a specific name or from a
specific folder, or to install an application from a self-expanding
compressed file with the “.EXE” extension.
nStart BackTrack Monitor just before you install an application, and
specify the program that runs the application installation.
NOTE
Many installation programs start automatically as soon as you
insert a CD disc into your CD drive. To make sure that installations
from CDs are monitored, open the BackTrack Settings screen and
set BackTrack to monitor setup files before you insert the CD disc
into the drive.
Monitoring installation of a single program
If you’d prefer to run BackTrack Monitor only when you are actually installing
applications, follow these steps before installing your new program:
1From the QuickClean Home Page, select Advanced tasks.
2From the Advanced task list, select Manage installed programs.
3Click Monitor a program with BackTrack.
4Click the Monitor button.
Before instal l ation actually st arts, BackTrack Monitor saves Regi stry settings
and other information on your computer so that its original state can be
restored later if you choose to remove the application from your computer.
BackTrack a monitored program’s installation
Use the QuickClean BackTrack wizard to uninstall a program tracked by
BackTrack Monitor.
You cannot use the BackTrack wizard to undo the installation of an
application that BackTrack Monitor did not monitor. In this situation, use the
Remove wizard.
Product Guide33
Managing Programs To Free Disk Space
To undo an application installation:
1From the Advanced task list on the Home Page, select Manage installed
programs.
2Click BackTrack a Monitored program.
3From the Select a BackTrack Archive screen, select the archive
representing the program you want to uninstall and click Next.
The BackTrack wizard processes the archive to determine what it needs
to undo. The BackTrack wizard removes the application and returns
registry settings to the values that were in effect before the application
was installed. The wizard displays a message telling you when it
successfully completes the job.
4Click Finish.
Restoring an archived program using Restore
The Restore wizard can completely restore any application if you have
archived it or let the Remove wizard make a backup copy of the application
before you removed it. The backup copy or the archive mus t still be ava ilable.
To restore an application:
1From the Advanced task is on the QuickClean Home Page, select
2Click Restore an archived program.
3From the Select an Archive to Restore screen, select the archive
4Select an archive or backup from the Restore wizard list and click Next.
5On the following screen, the names of all files that will be restored are
6Click Next.
7Choose one of the following:
34McAfee QuickClean 3.0
Manage installed programs.
representing the program you want to restore and click Next.
displayed.
Do not deselect any files if you are restoring an entire application. If you
deselect files, critical application files may not be restored and the
application may not run correctly, or at all.
The Replace Existing Files? screen displays.
M Only replace older files with newer files.
M Always replace existing files.
Managing Programs To Free Disk Space
M Never replace existing files.
8Click Restore to begin restoring the application.
When the wizard restores the application, it displays a messa ge that the
job is completed. You can click Report to view details of restoration
activity.
Restore deleted files
The Restore wizard can also restore individual files that the SpaceMaker
wizard has deleted if QuickClean made backup copies of the files.
To restore individual files:
1Repeat steps 1 through 5 above.
2Select the files you want to restore from the list that appears in the next
wizard screen; then click Next.
3Click Next to restore the selected files.
The Restore Results displays the details of restoration activity.
Delete backup copies
QuickClean backs up deleted files and applications so that you can restore
them if you change your mind later.
Backup files, which are compressed files containing copies of a ll deleted files ,
are stored on your computer in a location you can specify in the Folder settings
screen or in other locations that you can specify when you run one of the
QuickClean wizards.
Although backup copies are compressed, eventually they will take up a lot of
disk space. When you are sure that you will no longer want or need a backup
of a deleted application or group of files, delete the backup file.
To delete a backup file:
1From the Advanced task list, select Manage installed programs.
2Click Restore an archived program.
The Select an Archive to Restore screen displays and within the Task
pane a Related Tasks list displays. Here you can:
M Browse for an archi ve.
M View a report about the selected archive.
M Delete the selected archive.
Product Guide35
Managing Programs To Free Disk Space
3If you are sure that you no longer need t he selected archive, click Delete.
At such time, you are prompted to confirm deleting the file.
36McAfee QuickClean 3.0
QuickClean Activity Logs
When you click the Activity Log in the QuickClean main window, you will
have the option to view different reports that displays numeric and graphic
information about actions performed by any of the QuickClean wizards (e.g.,
summary, report lo gs, disk analysi s and file analysis).
Report Summary displays a complete list of files that were delet ed or modified
by each individual action. These reports can be useful in tracking down old
versions of files that were deleted but backed up, or were archived.
ReportDescription
Managing Programs To Free Disk Space
Summary of all QuickClean
reports
QuickClean Actions rep ortThis page lists all cha nges made by the individua l
Changes to Your Files and
Hard Drive report
This page shows numeric data about the total
number of f ile s aff ect ed, the t otal si ze of fil es mo ved,
compressed, or deleted, the disk-space savings, and
so on. The pie chart on the right shows the percent
of disk space regained by the selected action if you
are viewing a specific acti on r eport, or by all
QuickClean actions, if you are viewing Master Log
information.
wizards.
If you are viewing Master Log information, you see a
list of available action reports. Click Open to chose
an action report to view.
The Disk Analysis page displ ay s th e percent of total
disk space regained by del eti ng, moving, or
archiving files in each file category. The File Analysis
displays the total number of files in each category .
If you only want to see what Qu ic kC lean has done,
you can review the list of ac tion s di splayed in the
Reports window. However, if you want to keep a
record of QuickClean actions for later reference, you
can print the report informa t io n or sav e it as a file.
Product Guide37
Managing Programs To Free Disk Space
QuickClean settings
As you install QuickClean, you have the chance to change some ba sic defaults.
After QuickClean is installed, you can use the Settings screen to review or
change all default settings.
To see exactly what the default settings are, or to change them, select the
Change my QuickClean settings task under the Advanced tasks list. You can
change most option settings temporarily when you run a wizard, and you can
open the settings task list and make permanent changes to the default.
SettingDescription
GeneralIdentify the drives you want tracked by the
Application Remnant
Cleaner
MonitorHelps you configure BackTrack’s Installation Monitor
FolderSelect the default locations where Backup, Archive,
AdvancedDelete protect files based upon the number of days
Internet CleanupThis setting allows you to co nfigure the Intern e t
SmartLinks Database.
Configure ARC to start afte r rem oving a program
from your computer.
to run as you work, the type s of in stal l at io ns it
monitors, and how long BackTrack archives are kept
before they are deleted.
and Backtrack compr essed files created by
QuickClean will be stored.
since they were last acce ssed or modified.
Cleanup to start as you close Internet Explorer. You
can also select the file types you want to delete.
38McAfee QuickClean 3.0
How to Free Di sk Space
About QuickClean Lite
The QuickClean Lite wizard enables you to clean your computer of
unnecessary f iles and free valuable hard disk spac e.
You can use the QuickClean Lite wizard to perform any of the following
cleaning tasks:
nClean your Recycle Bin.
nRemove files that accumulate as you browse the Internet. Files of this
type are stored in folders called Temporary Internet or Cache folders.
nRemove Shortcu ts without an assoc iated program, application,
hypertext link, etc.
nDelete lost file fragments.
nDelete Windows Registry information, shortcuts, and system file
references for applications that no longer exist on your computer.
nDelete temporary files.
5
nRemove deleted and sent messages from a Microsoft supported e-mail
client (i.e.: Outlook, Outlook Express).
nDelete Most Recently Used shortcuts.
How QuickClean Lite works
First, the user selects the types of files they wish to remove from their
computer. Next, the QuickClean Lite wizard scans the contents of the hard
disk and identifies all files meeting the user-selected criteria.
The user proceeds with the cleaning task if they are satisfied with the results
of the scan. Finally, QuickClean Lite provides a graphic representation of the
amount of reclaimed space after deleting the files.
NOTE
Deleted files are not backed up. You cannot restore files deleted by
QuickClean Lite.
Product Guide39
How to Free Disk Space
QuickClean Lite cleaning options
The final removal process used by QuickClean Lite is to either use normal
Windows deletion or secure file deletion using McAfee Shredder. Normal
Windows deletion allows the recreation of deleted files using an “undelete”
type of program. McAfee Shredder prevents file restoration programs from
recreating deleted files by securely removing files from your computer.
NOTE
The QuickClean Home page displays the default hard disk in your
computer under Drive Info. If your computer is partitioned, or
maintains more than one physical hard disk, select the specific
drive wish to clean from the Select a Drive drop-down pick list
before starting QuickClean Lite.
How to run QuickClean Lite from the CD
If your computer maintains a limited amount of hard disk space, you can still
use QuickClean Lite’s functionality to remove accumulated junk from your
computer. To run QuickClean Lite from the CD:
1Insert the McAfee QuickClean installation CD into your computer’s CD
ROM drive.
The Autorun image displays.
2Select Run QuickClean Lite now.
The QuickClean Lite Home page displays.
3Select the cleaners you want to run and refer to the on-screen
instructions to complete this task.
40McAfee QuickClean 3.0
About SpaceMake r
Freeing specific amounts of disk space on a drive
If you need a specific amount of disk space on one of your drives, click
SpaceMaker in the QuickClean screen and tell the SpaceMaker wizard how
much space you want, what kind of files it can delete, and whether you want
it to make compressed backup copies of the files. Then let it free space f or you.
By default, files are backed up before they are deleted. The compressed
backup uses less disk spa ce than the deleted files, and gives you a chance to
recover deleted files later. Each time you run the SpaceMaker wizard, you can
turn off backups or specify a different location for the backups.
Choose the SpaceMaker wizard to:
nQuickly create free space on one of your drives.
You can specify the drive and the amount of space you want to free. As
soon as SpaceMaker frees the specified amount of space, it stops deleting
files. If you choose to free as much space as possible, the wizard
continues to delete files until it can find no more files that are old enough
to delete in the categories you have chosen.
nDelete files from more categories than QuickClean.
How to Free Disk Space
SpaceMaker lets you delete files that some users might need, such as
bitmap and multimedia files, backup files that have the “.BAK”
extension, temporary files that Windows or Windows applications
generate, screen savers, online help files, and so on.
nRun a Custom rul e.
No file is deleted if it has been modified or accessed within the period
specified by the Advanced Settings screen. The default period is 180 days.
Product Guide41
How to Free Disk Space
Custom Rule Creator
Overview
The Custom Rule Creator allows you customize your cleaning tasks. If there
are specific folders or (for example) types of files that you want to remove
from your computer, then you can create a custom rule to rid them from your
computer.
The Custom Rule Creator enables you to search for and clean files...
n... located in a specific drive or folder.
n... with specific file extensions. For example, you may want to clean .zip
files (zipped or compressed files), .doc files (MS Word files), or .log files
(log files).
If the extension list box does not display the specific file extension that
you want to search for, you can add a custom extension directly in the
Custom file type text box.
n... based upon the age of the file.
n... based upon the size of the file (in Kilobytes).
To create or run a custom rule
Please refer to refer to online Help for specific instructions about how to create
and run a custom cleaning rule.
Remove Internet files from your computer
Please refer to on-line help for additional information about how to use the
wizards described in this section.
Browser Cache Cleaner
When you browse the Internet, your browser copies each Internet page and its
graphics to a cache folder (temporary Internet files) on your hard disk. The
browser can then load the page quickly if you return to it again.
This is a useful feature if you repeatedly visit the same Inter net pages and their
content does not change. Most of the time, however, the cached files are not
useful and can be deleted.
The Browser Cache Cleaner helps you to quickly get rid of these cached files
that may affect your computer’s hard disk space and performance.
42McAfee QuickClean 3.0
How to Free Disk Space
Browser Cookies Cleane r
Cookies are small files that your Web browser stores on your computer at the
request of a Web server. Each time you view a Web page from the Web server,
your browser sends the cookie back to the server. These cookies can act like a
tag, which let the Web server tr ack which p ages you view and how often you
return to them.
The Browser Cookie Cleaner wizard helps you to quickly get rid of these files
that may jeopardize your privacy and security while browsing the Internet.
E-mail Cleaner
With the amount of e-mail you receive in just one day, cleaning your e-mail
messages can be a big task . Use QuickC lean’s E-mail Cleaner feature to help
you get rid of old messages that you no longer need and importantly, you do
not want others to have access to.
ActiveX and Plug-in Cleaner
ActiveX is a technology used by software developers to implement controls in
a program. An ActiveX control can add something as simple and useful as a
button in a program’s interface. Most of these good controls have been signed,
meaning that they are harmless and will do nothing bad to the data on your
computer. However, less than honest people can use ActiveX technology to
write programs that can jeopardize the s ecurity of the data on your computer,
such as a program which searches your hard drive for certain file types and
sends the information in it someone else.
Similarly, plug ins are small, special-purpose applications design to perform
specific control in a program. For example, a plug-in module incorporated into
your Web browser software.
Use the ActiveX and Plug-in Cleaner to get rid of any of these items that may
cause harmful effect on your computer.
Privacy Cleaner
QuickClean’s Privacy Cleaner scans your computer for spyware or adware
programs installed or running in your computer. Spyware and adware
programs capture data about your Internet browsing habits; the data collected
is often given to interested third parties.
NOTE
Adware programs track your Internet browsing habits with your
knowledge. Adware becomes spyware if the program captures
your browsing habits without your knowledge.
Product Guide43
How to Free Disk Space
Internet Buildup Cleaner
The Internet Buildup Cleaner helps you keep your computer free of Internet
clutter. You can configure this wizard to start automatically every time you
close Internet Explorer.
To configure this cleaner, click Internet Buildup Cleaner on the QuickClean
settings screen. First, check the “Run Internet Cleanup when you close your
Internet browser” check box to enable this cleaner. Then select the files types
you want this cleaner to remove (cookies, cache - or temporary Internet files,
and history files) and click OK.
This cleaner does not runs on demand; rather it starts only as you close
Internet Explorer. If you want to free disk by removing Internet Buildup
“on-demand,” you can:
M Run QuickClean Lite and select the cleaners you want to run.
M Create a custom rule, that which cleans your Internet cache folders.
44McAfee QuickClean 3.0
Delete files securely: Shr edder
When you save a file in Windows, it is stored in multiple pieces (in clusters
made up of multiple sectors) on the disk. Windows also saves a roadmap, or
index, that points to these clusters in two copies of the FAT (File Allocation
Table). The FAT contains the directions to all the pieces of your files, so that
applications can find them again later.
In addition to FAT file systems, McAfee Shredder supports New Technology
Filing System (NTFS). NTFS is the file system used by Windows NT, Windows
2000 and Windows XP.
When you delete a file, all the information stored in that file is not actually
erased from your disk. Instead, Windows simply frees the clusters where the
file was stored, making those locations available in the FAT. Thereafter,
applications can write new information to those clusters. This means that all
or part of your files can be reconstructed even after you delete them. Undelete
programs can reconstruct a deleted file very easily, especially immediately
after you delete the file and before you save any new information that might
be written over the deleted file’s contents.
For privacy and security reasons, you may want to be positive that the
information stored in files you delete is permanently erased from your
computer. McAfee Shredder does this for you by “security wiping” deleted
files so they cannot be restored or rebuilt using undelete utilities. Unlike other
file security erase programs, McAfee Shredder erases even the filename and
the compressed data on DriveSpace drives. Note that it is not possible to shred
network files, or files compressed with compression other than DriveSpace in
an absolutely secure manner.
How to Free Disk Space
NOTE
You can select McAfee Shredder properties to specify the
shredding level to perform. You can select: Quick to shred the
information once; U.S. Government Multipass to make seven
passes of repeatedly erasing the data; or Custom to indicate how
many passes to make which allows up to 99 passes.
Shredding selected files
If your computer is running on Windows Me, some files even if shred, may be
retained on your PC since these are protected by the Windows Me System
Restore.
You can shred files using drag and drop, which is a fast way if all the files are
centrally located. Or if the files are in several places, you can shred them by
starting McAfee Shredder and selecting the files to erase.
Product Guide45
How to Free Disk Space
McAfee Shredder allows you to shred files on your PC’s Recycle Bin,
Temporary Internet, as well as Web site history folder. You can a lso specify the
number of shredding passes (1-99) and can now have the option to shred an
entire drive.
Refer to the online Help file to display step-by-step instructions on how to
shred selected files and non-file data.
NOTE
After you shred non-file data, you will not be able to undelete any
deleted files that utilized this information.
46McAfee QuickClean 3.0
Advanced Cleaning Tasks
Registry Cleaner
View and remove unconnected registry entries
Using QuickClean’s Registry Cleane r makes maintenance and
troubleshooting of your computer’s registry database a quick and easy
process. It helps you clean the registry database of your PC by showing you
key entries that may refer to files that have moved or no longer exist.
Always be careful deleting registry keys, values and settings. The Registry
Cleaner displays registry entries for programs that are no longer installed in
your computer. This wizard is only designed for maximum end user control,
and not for safety. There are no safeguards in the wizard that would prevent
you from deleting registry entries your computer needs, so always exercise
caution before you decide to select a file to be deleted.
Orphan Files Cleane r
6
View and remove incomplete applications and dynamic link libraries
The Orphan Files Cleaner uses the Smartlinks Database t o identify incomplete
programs and dll files stored in your computer’s hard disk. Programs that
were not installed or uninstalled completely could leave some of their
components on your hard disk. Dynamic Link Library files (dlls) are
specialized files that are used to run programs. These too, could remain on
your computer if a program was not installed or uninstalled completely.
Duplicate Files Cleaner
View and remove duplicat e files th at appe ar to be dupli cates
The Duplicate File Cleaner is a quick and easy way to locate and view
duplicate files on your computer. Once the files are displayed, determine
which ones you want to delete and follow through the wizard instructions.
Product Guide47
Advanced Cleaning Tasks
Always be careful in de leting duplicate files. The Duplicate File Cleaner
displays duplicate files on your computer system but it does not mean that
these files shown are identical or can safely be deleted.
Some files may be critical and will cause serious or fatal instability on your
computer once deleted. The wizard is only designed for maximum end user
control, and not for safety. There are no safeguards in the wizard that would
prevent you from deleting files that your computer system needs, so always
exercise caution before you decide to select a file to be wiped out.
48McAfee QuickClean 3.0
Updating McAfee QuickClean
About Instant Updater
As technologies advance, we continually provide updates to McAfee software
products. To ensure the highest level of protection, you should always obtain
the latest version of your McAfee product.
Updating your software is simple using McAfee's Instant Updater. It is a
seamless process and requires minimal interaction on your part.
Instant Updater is also the mechanism used to register your product with
McAfee. In order to obtain product updates, you must register your product
with McAfee.
Why Do You Need to Update?
nNew features may be released for your McAfee product.
nProduct fixes are periodically available.
nNew product content is updated periodically.
nUpdates to anti-virus signature files are frequently available.
7
How Does the Updating Process Work?
Instant U p dater allows you to obtain and apply updates to your McAfee
products while connected to the Internet. If an update exists, you will receive
a notification. At that time, you can download and apply the updates to your
products.
Instant Updater features
nAuto Update is Instant Upda ter’s default setting .
Instant Updater silently checks for, and as appropriate, applies product
updates while you are connected to the Internet.
Occasionally, Instant Updater may ask you to restart your computer to
apply the updates. Auto Upda te checks for upd at es da ily to e nsur e that
your McAfee product, product content, and related elements such as the
virus scan engine and DATs are c urrent.
Product Guide49
Updating McAfee QuickClean
nAuto Inquiry: If Auto Inquiry is enabled, it allows you to receive
nManual Updating: If you rarely connect to the Internet, you may prefer
Home page query
Related to Instant Updater is Home page query. This feature allows you to
configure your McAfee product’s home page to di splay a message when an
update is available. After you install your McAfee software, Home page query
“on” is the default setting.
Configuration
For additional information regarding auto inquiry and auto update settings,
please refer to on-line Help.
notification of product updates while connected to the Internet. We do
not recommend Auto Inquiry if you have slow Internet connection
to use Manual Updating with your McAfee product. You can manually
update while connected to the Internet. To do this, select the UPDATE
function from within the individual product.
Manual Updating provides you with explicit control of the updating
process.
50McAfee QuickClean 3.0
How to contact McAfee
www.McAfee-at-Home.com
McAfee is famous for its dedication to customer satisfaction. We have
continued this tradition by making our site on the World Wide Web a valuable
resource for answers to your questions about McAfee Consumer Products. We
encourage you to visit us at http: //www.mcafee-at -home.com and m ake this
your first stop for all of your product support needs.
Customer Service
To order products or obtain product information, contact the McAfee
Customer Service department at (972) 308-9960 or write to the following
address:
Please note, (972) 308-9960 is telephone call to the United States of America.
A
Technical support
For agent assisted technical support, please visit http://www.mcafeehelp.com.
Our support web site offers 24-hour access to solutions to the most common
support requests in our easy-to-use 3 step Answer Wizard. Additionally, you
may use our advanced options, which include a Keyword Search and our
Help Tree, which have been designed with the more knowledgeable user in
mind. If a solution to your problem cannot be found, you may also access our
24-hour FREE Chat Now! and Email Express! options. Chat and E-mail will
enable you to quickly reach our qualified support engineers, through the
Internet, at no cost. Phone support information can also be obtained from our
self-help web si te at: http://www.mcafeehelp.com.
BEFORE YOU CONTACT McAfee Software for technical support, locate
yourself near the computer with the McAfee product installed and verify the
information listed below:
nVersion number of your McAfee software
From the McAfee QuickClean main window select Help > About to find
this information.
Product Guide51
How to contact McAfee
nWindows operating system version number
nAmount of memory (RAM)
nComplete description of the problem
nEXACT error message as on screen
nWhat steps were performed prior to receiving error message?
nIs the error persistent; can you duplicate the problem
nModel name of hard disk (internal / external)
nExtra cards, bo ards, or hardware
Analyze your hard drive
Archive a program, 32
Contact McAfee, 51
Find non-critical files consuming disk
, 41
space
Install QuickClean, 17
Monitor a program’s installation, 32
Remove a program from your computer, 30
Remove application remnants from your
computer
Restore an archived program, 34
Run QuickClean Lite from the CD, 40
Troubles h oot installation problems, 19
Uninsta ll QuickClean, 20
Use QuickClean Lite, 39
, 30
, 31
I
Instant Updater, 13
About, 49
Auto Inquiry, 50
Auto Update, 49
Configuration, 50
Home page query, 50
Manual Update, 50
Internet Buildup Cleaner, 14, 44
Internet Cleanup Settings, 38