MBT Lighting DMX6 User Manual

DMX6 user manual

6CH DMX Controller

Introduction

The DMX controller has 6 channels and 7 sliders. only one slider is set as the master and the left sliders are

slaves. the master slider controls 6 channels’s DMX output and 6 slave sliders control each channel’s DMX

output respectively. DMX value is from 0~255. Before your application, please read instructions carefully and

thoroughly.

Technical specification

power source-------------------------------------------DC 9V 100mA ADAPTER 6F22 BATTERY

DMX output--------------------------------------------3PIN XLR female socket

Dimension----------------------------------------------173x153x55mm

Panel layout

1

7

8 7 6 5 4 3 2

1. power indicator

2. master slider

3. slave slider (control channel 6)

4. slave slider( control channel 5)

5. slave slider (control channel 4)

6. slaveslider (control channel 3)

7. slave slider(control channel 2)

8. slave slider(control channel1)

Operational instruction

After connecting power source,switch on.the power indicator is on.

Adjust DMX value by sliders.

importants!

Forbid using it in rainy,moist places in case of electronic short.

Use ordinary 6F22 battery which can sustain 5 hours.

DMX socket polarity: 1---Ground 2---Data- 3---Data+

DMX output address range:0~5

Address 0=channel1

Address1 =channel 2 and by analogy,address5=channel5