MBT Lighting CX803A User Manual

ISO 9001 CERTIFIED
CX-803A
8 Channel DMX Console
User manual
websitewww.liteputer.com.tw
E-mail: sales@liteputer.com.tw
Lite-Puter
CX-803A [EUM-B]
56
170
ISO 9001 CERTIFIED
Chapter 1. CX-803A Instruction
1-1 Feature
Standard DMX 512 signal control
8 dimming control channel
8 control scene setting
Chaser function:
1.) Channel chase
2.) Scene chase
3.) Speeding control
4.) Chase Function
Flash
Audio input
1-2 Specification
Power supply DC 12V/ 1A
Control signal DMX512 / 1990
Control channel 8 channel
Connector XLR 3-pin(x1), XLR 5-pin(x1),phone jack RJ11(x2) Audio input Max. input-10 db 100mV
Weight 1.2 Kg
 
Dimension unitmm
237
8CH. DMX CONSOLE
CX-803A
9
9
9
8
8
7
7
6
6
4
4
3
3
2
2
1
1
15324678
9
8
8
7
7
6
6
4
4
3
3
2
2
1
1
10
9 8 7 6 5 4 3 2 1 0
MASTER
SPEED
AUDIO
BLANK
SC/CH
CHASE 1~4
CHASE 5~8
PROG
MEM
1
51
Lite-Puter
CX-803A [EUM-B]
ISO 9001 CERTIFIED
1-3 CX-803A Function
1
10
11
1
2
CX-803A
9
99 8 7 6
4 3 2 11
8CH. DMX CONSOLE
8 7 6
4 3 2
99 8 7 6
4 3 2 11
SPEED
10
8 7 6
4 3 2
9 8 7 6 5 4 3 2 1 0
AUDIO
BLANK
SC/CH
CHASE 1~4
CHASE 5~8
3
4
5
6
7
PROG
8
1234
5678
MASTER
MEM
2
MASTER-VR
MASTER
Master dimming control
Master Flash control
3
4
5
6
7
8
9
10
SPEED/ AUDIO
BLANK
SC/CH
CHASE 1
CHASE 2
PROG
LED
VR-1…VR-8
Audio / speed chase control
Pause
Scene / Channel control
Chase 1
Chase 2
Scene/ Chase direction control
Signal display
Setting 1…8 dimming channel
Recall 1…8 Scene
11
1 ~ 8
Channel / Scene setting / FLASH
2
Lite-Puter
CX-803A [EUM-B]
ISO 9001 CERTIFIED
1-4 CX-803A Rear panel
ON
CONTROL
DC 12V
IN
OFF
12 13
12 Power supply: DC 12V / 1A
13 Power switch
14 Audio input: 100mV
15 DMX connector: XLR 5-PIN
16 DMX connector: XLR 3-PIN
17 DMX connector: PHONE JACK (RJ11)
1-5 CX-803A audio sensitivity control
PUSHPUSH
DMX OUTAUDIO IN DMX OUT
161514 17
51
2
432
3
1:GND 1:GND 2:Data-
2:Data­3:Data+ 3:Data+ 4:NC 5:NC
1
2
2
334
141
1:V+12V 2:Data+ 3:Data­4:GND
18 Audio sensitivity control
18
3
CX-803A [EUM-B]
Lite-Puter
ISO 9001 CERTIFIED
Chapter 2. CX-803A operation
2-1 SCENE setting
SelectCHmode, and move the fader to set the dimming value
pressPROG+1~8 to save control scene.
STEP-1 pressSC / CHto select the control channel
LED : off in CH mode LED : on in SC mode
STEP-2 moveMASTER-VRto the top
STEP-3 moveVR-1 … VR-8to dimming
STEP-4 pressPROG+1…8to confirm and save the selection
1.) When MASTER-VR in 100%, and the VR-1…VR-8 in 50% of dimming value,
the SCENE total output dimming value will be 50%.
2.) When MASTER-VR in 50 %, and the VR-1…VR-8 in 50% of dimming value,
the SCENE total output dimming value will be 25%.
2-2 Scene recall
Refer to 2-1 to set up the dimming value of SC-1…SC-8, use the following function to recall the scene.
A: 0%…100% VR control
STEP-1 pressSC / CHkey to select【SC】mode. (LED ”on”)
STEP-2 pressVR-1…VR-8
Ex : to recall SC-2, adjust the【VR-2】, to recall scene 2 by dimming
B: FLASH
STEP-1 pressSC / CHto select【SC】mode. (LED ”on”)
STEP-2 press1…8
EX : to recall SCENE 2, press【2】,and scene 2 switch to 100% full, and release the
key to off the function.
4
CX-803A [EUM-B]
Lite-Puter
ISO 9001 CERTIFIED
2-3 CHASE
(1) Internal chase setting (SPEED CHASE)
(2) Audio input control (AUDIO)
2-3-1 Internal chase setting ( SPEED CHASE )
2 mode of chase setting:
(1) inCHmode : Chase by CH mode
(2) inSCmode : Chase by SC mode
CHmode
STEP-1 pressSC/CH】, to select the channel. (LED ”off”)
STEP-2 to select the chase.
1. pressCHASE 1:
CH. 1 2 3 4 5 6 7 8
STEP 1 STEP 2 STEP 3 STEP 4
● ○ ○ ○
● ○ ○
○ ○
● ○
○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
Repeat…
2. pressCHASE 2】:
CH. 1 2 3 4 5 6 7 8
STEP 1 STEP 2 STEP 3 STEP 4
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
○ ○ ○ ○
● ○ ○ ○
● ○ ○
○ ○
● ○
○ ○ ○
Repeat…
Led : on off
STEP-3 to adjust the speeding of chase, pressSPEEDto adjust.
STEP-4 pressPROGto change the chase direction.
5
Lite-Puter
CX-803A [EUM-B]
ISO 9001 CERTIFIED
SCmode
STEP-1 pressSC/CH】, to select the SC mode
STEP-2 to select
pressCHASE 1】:to execute the SC-1…SC-4 chase.
pressCHASE 2】:to execute the SC-5…SC-8 chase.
STEP-3 moveVR-1…VR-8
SelectCHASE 1】:
moveVR-1…VR-4, ”SC-1…SC-4” to execute ”Chase” mode moveVR-5…VR-8, ”SC-5…SC-8” to execute ”Dimming” mode
SelectCHASE 2】:
moveVR-1…VR-4, ”SC-1…SC-4” to execute ”Dimming” mode moveVR-5…VR-8, ”SC-5…SC-8” to execute ”Chase” mode
The dimming value control by MASTER-VR for above chase setting, (please refer 2-1 / STEP-2)
STEP-4 Chase speeding, select theSPEEDto control
STEP-5 PressPROGto change the chase direction
2-3-2 AUDIO CHASE
STEP-1 turn【SPEEDkey to the bottom and feel “ click “ which appointed to audio.
2-4 BLANK
pressBLANKfor pause, and press once again back to the normal mode.
6
CX-803A [EUM-B]
Lite-Puter
Loading...