Please take the time to read all of the information in this manual. Familiarity with operation and installation
procedures will help you obtain the best possible performance from your new AM/FM Stereo Receiver with
CD Player.
Safety Information
CAUTION! THIS MARINE CD PLAYER IS A CLASS
1 LASER PRODUCT. THIS UNIT USES A
VISIBLE/INVISIBLE LASER BEAM WHICH COULD
CAUSE HAZARDOUS RADIATION IF EXPOSED
DIRECTLY. BE SURE TO OPERATE THE MOBILE CD
PLAYER AS INSTRUCTED.
USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OR PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR BY
YOURSELF. PLEASE REFER SERVICING TO A
QUALIFIED TECHNICIAN.
CHANGES OR MODIFICATIONS TO THIS PRODUCT
NOT APPROVED BY THE MANUFACTURER WILL
VOID THE WARRANTY AND WILL VIOLATE FCC
APPROVAL.
1. Power On/Off and Display Dimmer: Press to turn the unit On or Off. Press and hold to dim the dis-
play. Press and hold again to restore display’s illumination.
2. Volume Control: Press the button to increase the volume level, and press the button to
decrease the volume level.
3. CD Play/Pause and Mute Button:
CD and CD Changer Mode: Press to pause disc play. Press again to resume play.
Radio, Sirius Satellite Radio and Auxiliary Audio Input Modes: Press to mute volume level. Press
again to restore.
4. Enter/Band and Loud Button (ENT BND):
Radio: Press to select AM1, AM2, FM1, FM2 and FM3 radio bands.
Loudness: Press and hold button until “LOUD ON” appears in the display to boost high and low tones
at low volume levels. To deactivate press and hold again until “LOUD OFF” appears in the display.
IPOD Mode: See "IPOD Operation" for more information.
5. Infrared Eye: Receives the signals from the optional remote control.
6. Open Button: Press to fold down the front panel to access the CD player slot and disc eject button.
7. Display Area: This area displays all function information for the radio, CD player, auxiliary and IPOD
modes.
8. Equalizer Button (EQ): Press to choose between preset sound equalization settings.
3
Page 4
Button Locations and Functions
9. Display Button (DISP):
Radio Mode: Press to display radio RBDS (Radio Broadcast Data System) information.
CD and CD Changer Mode: Press to display track information.
10. Setup Button: Press to access Bass, Treble, Balance, Fader and Subwoofer controls. Press and hold
for 10 seconds to access Beep Confirmation, Default Volume and AM/FM Tuning System.
11. Automatic Station Memory Button (ASM):
Radio Mode: Press and hold for automatic station memory storing. Press and release for scanning
memorized stations.
12. Multi-Function Button #6:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #6 (CH6).
Press and release when recalling preset radio station #6.
13. Multi-Function Button #5:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #5 (CH5).
Press and release when recalling preset radio station #5.
CD Mode: Press to preview each track on the CD for 10 seconds. Press again to cancel.
CD Changer Mode: Press to preview each track on the loaded CD for 10 seconds. Press and hold to
preview the first track on every loaded CD for 10 seconds. Press again to cancel.
14. Multi-Function Button #4:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #4 (CH4).
Press and release when recalling preset radio station #4.
CD Mode: Press to play all the tracks on the CD in random order. Press again to cancel.
CD Changer Mode: Press to play all the tracks on the loaded CD in random order. Press and hold to
play all the CDs in random order. Press again to cancel.
15. Multi-Function Button #3:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #3 (CH3).
Press and release when recalling preset radio station #3.
CD Mode: Press to repeat a CD track. Press again to cancel.
CD Changer Mode: Press to repeat the CD track. Press and hold to repeat the entire loaded disc.
Press again to cancel.
16. Multi-Function Button #2:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #2 (CH2).
Press and release when recalling preset radio station #2.
CD Changer Mode: Push to change to a higher number disc in the CD changer.
17. Multi-Function Button #1:
Radio Mode: Press and hold until a beep is heard to memorize a radio station into memory #1 (CH1).
Press and release when recalling preset radio station #1.
CD Changer Mode: Push to change to a lower number disc in the CD changer.
18. Tune/Track Buttons:
Radio Mode: Press either button and the tuner will scan to the next strong station and stop. Then
press and hold either button until “MANUAL” appears in the display, then release. Again, press either
button until the desired radio station appears in the display.
CD and CD Changer Mode: Press to change the track to a lower or higher track.
19. Mode Button:
Press to change the play source: Radio, CD and Auxiliary Audio Input. Depending on what other input
sources are connected (IPOD, Sirius, USB and CD Changer) these play source will also appear in the display.
20. Menu Button:
Sirius Mode: See "Sirius Satellite Radio Operation" for more information.
IPOD Mode: See "IPOD Operation" for more information.
21. Eject Button: Press to eject the loaded disc.
22. CD Slot: To play a CD insert a disc into the slot with the label facing up.
23. Power Indicator: Lights up when the unit has power.
4
Page 5
Remote Control Button Locations and Functions (Optional)
DIM
ENT
BND
LOUD
MUTE
VOLUME
RPT
SHFSCN
DIR / CAT
S MOD
IPOD MENU
1
35
6
2
7
4
9
80
MODE
MENU
OK
DVD
SETUP
SUB T
TITLE
AUDIO
DVD
MENU
1
19
3
2
2
18
17
20
4
12
16
13
14
15
18
1. Power On/Off and Display Dimmer: Press to
turn the unit On or Off. Press and hold to dim
the display. Press and hold again to restore.
2. Volume Control: Press the and buttons
to increase and decrease the volume level.
3. CD Play/Pause and Mute Button:
CD and CD Changer Mode: Press to pause
disc play. Press again to resume play.
Radio, Sirius Satellite Radio and Auxiliary t
Audio Inpu Modes: Press to mute volume level.
4. Enter/Band and Loud Button:
Radio: Press to select AM1, AM2, FM1, FM2
and FM3 radio bands.
Loudness: Press and hold button until “LOUD
ON” appears in the display. To deactivate,
and hold again until “LOUD OFF” appears.
IPOD Mode: See "IPOD Operation" for
more information.
12. Multi-Function Button #6:
Radio Mode: Press and hold until a beep is
heard to memorize a radio station into memory
#6 (CH6). Press and release when recalling
preset radio station #6.
13. Multi-Function Button #5:
Radio Mode: Press and hold until a beep is
heard to memorize a radio station into memory
#5 (CH5). Press and release when recalling
preset radio station #5.
CD Mode: Press to preview each track on the
CD for 10 seconds. Press again to cancel.
CD Changer Mode: Press to preview each
track on the CD for 10 seconds. Press and
hold to preview the first track on every loaded
CD for 10 seconds. Press again to cancel.
press
14. Multi-Function Button #4:
Radio Mode: Press and hold until a beep is
heard to memorize a radio station into memory
#4 (CH4). Press and release when recalling
preset radio station #4.
CD Mode: Press to play all the tracks on the
CD in random order. Press again to cancel.
CD Changer Mode: Press to play all the tracks
on the CD in random order. Press and hold to
play every loaded CD in random order. Press
again to cancel.
15. Multi-Function Button #3:
Radio Mode: Press and hold until a beep is
heard to memorize a radio station into memory
#3 (CH3). Press and release when recalling
preset radio station #3.
CD Mode: Press to repeat a CD track. Press
again to cancel.
CD Changer Mode: Press to repeat a CD track.
Press and hold to repeat the entire disc. Press
again to cancel.
16. Multi-Function Button #2:
Radio Mode: Press and hold until a beep is
heard to memorize a radio station into memory
#2 (CH2). Press and release when recalling
preset radio station #2.
CD Changer Mode: Push to change to a higher
number disc in the CD changer.
17. Multi-Function Button #1:
Radio Mode: Press and hold until a beep is
heard to memorize a radio station into memory
#1 (CH1). Press and release when recalling
preset radio station #1.
CD Changer Mode: Push to change to a lower
number disc in the CD changer.
18. Tune/Track Buttons:
Radio Mode: Press and the tuner will scan to
the next strong station and stop. Press and
hold until “MANUAL” appears in the display
then release. Then press or until the
desired radio station is tuned-in.
CD and CD Changer Mode: Press to change
the track to a lower or higher track
19. Mode Button:
Press to change the play source: Radio, CD
and Auxiliary Audio Input. Depending on what
other input sources are connected (IPOD,
Sirius, USB and CD Changer) these play
sources will also appear in the display.
20. Menu Button:
Sirius Mode: See Sirius Satellite Radio
Operation section for more information.
IPOD Mode: See "IPOD Operation" for more
information.
5
Page 6
General Operations
Power On/Off:
Press the button to turn the unit On or Off.
Selecting a Play Source:
To select a play source, press the MODE button
until the desired source appears in the display:
AM1, AM2, FM1, FM2 or FM3
(AM and FM Radio),
SIRIUS (Satellite Radio Input, if connected),
CD (Built-in CD Player),
CD-CH (CD Changer, if connected),
AUX IN (Auxiliary Audio Input),
IPOD (IPOD Input, if connected) and
USB (MP3 Player, if connected).
TE
MU
DIM
VOL
D
LOU
VOL
SMOD
U
Pod MEN
i
TE
MU
DM
L
VO
D
LOU
VOL
S-MOD
NU
Pod ME
OPEN
T
SC
F
SH
RPT
DIRCAT
1
4
3
2
OPEN
ST
N
SC
SHF
PT
R
DIR/CAT
2
1
5
4
3
EQ
SUB W
DISP
ASM
N
6
5
EQ
W
SUB
DISP
ASM
6
Dimming the Display:
Press and hold the button to dim the brightness of the display. Press and hold again to
restore the brightness of display.
Display Selection:
Press the DISP button to display the information
according to the mode selected.
Example: Press the DISP button in the Sirius
Radio mode to display SONG-TITLE _> ARTIST
NAME _> CATEGORY _> SONG-TITLE.
AM/FM Radio Operations
Power On/Off:
Press the button to turn the unit On.
Selecting the Play Source:
Press the MODE button until “AM1, AM2, FM1,
FM2 or FM3” appears in the display.
EQ
UB W
DISP
ASM
6
5
EQ
W
SUB
DSP
ASM
SAT
6
EQ
W
SUB
DISP
ASM
6
1
ST
DR/CAT
ST
OPEN
DIRCAT
1
OPEN
SONG
2
OPEN
DIR/CAT
1
SCN
F
SH
PT
R
4
3
2
TTLE
SCN
F
SH
PT
R
5
4
3
N
SC
SHF
PT
R
5
4
3
2
TE
MU
M
D
VOL
D
LOU
L
VO
SMOD
Pod MENU
i
TE
MU
DM
VOL
D
LOU
VOL
S-MOD
NU
Pod ME
TE
MU
DM
VOL
D
LOU
L
VO
S-MOD
U
Pod MEN
6
Page 7
AM/FM Radio Operation (Continued)
Selecting the AM or FM Band:
Press the ENT BND button repeatedly and select
from FM1, FM2, FM3, AM1 or AM2.
Manually Tuning in a Radio Station:
Press and hold either the or button until
“MANUAL” appears in the display then release.
Then press the or again until the desired
radio station appears in the display.
Note: The unit will automatically switch from FM
Mono to FM Stereo when the signal strength
increases to a stereo level. If the stereo signal
should become weak, the unit will switch back to
Mono. FM Stereo reception is indicated when the
“ST” appears in the display.
Tuning-In a Radio Station Using Seek:
Press and release either the or button
and the tuner will scan-up to the next strong station, and stop seeking, then start playing.
DIM
DM
Lower
Frequency
IM
D
TE
MU
VOL
D
LOU
L
VO
TE
MU
VOL
D
LOU
VOL
Higher
Frequency
TE
MU
VOL
D
OU
L
VO
OPEN
ST
SCN
F
SH
PT
R
DRCAT
1
4
3
2
OPEN
ST
SCN
F
SH
PT
R
DR/CAT
1
4
3
2
OPEN
ST
SC
SHF
PT
R
DIRCAT
1
4
3
2
EQ
SUB W
DSP
ASM
6
5
EQ
W
SUB
DSP
ASM
6
5
EQ
W
SUB
DISP
ASM
N
6
5
Memorizing Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Tune-in the desired radio station.
3. To memorize the station press and hold any of
the six radio station recall buttons until you
hear a beep.
Recalling Memorized Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Press and release one of the six radio station
recall button to select the memorized radio
station.
Lower
Frequency
IM
D
S-MOD
od MEN
P
IM
D
SMOD
U
Pd MEN
Higher
Frequency
Memorized Radio Station Indicator
TE
MU
VOL
D
LOU
VOL
U
OPEN
ST
N
SC
SHF
PT
R
DR/CAT
3
2
1
6
5
4
Radio Station Recall Buttons
TE
MU
VOL
D
LOU
VOL
OPEN
ST
SCN
F
SH
PT
R
DRCAT
3
2
1
6
5
4
EQ
W
SUB
DSP
ASM
EQ
W
SUB
DSP
ASM
7
Page 8
AM/FM Radio Operation (Continued)
VOL
VOL
Automatically Store Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Press and hold the ASM button until “AST”
appears in the display. The tuner will search
for the strongest stations and store them into
memory. The new stations will replace stations that were previously stored in the current band.
Note: After the new stations are stored into
memory the tuner will start scanning the
newly memorized stations.
3. When a desired station is reached, press the
ASM button to stop scanning.
Scanning Stored Radio Stations:
1. Press the ENT BND button to select either the
FM1, FM2, FM3, AM1 or AM2 radio band.
2. Press the ASM button and the tuner will scan
thru the preset stations stored in the current
band and pause for 5 seconds at each station.
When a desired station is reached, press the
ASM button again to stop scanning.
Pod MEN
Pod MEN
i
EQ
SUB W
DSP
ASM
N
6
5
T
1
DR/CAT
OPEN
2
SC
F
SH
PT
R
4
3
TE
MU
DM
VOL
D
LOU
L
VO
S-MOD
U
Hold
EQ
W
SUB
DISP
ASM
6
5
ST
1
DIRCAT
OPEN
2
SCN
SHF
PT
R
4
3
TE
MU
IM
D
VOL
D
LOU
L
VO
SMOD
U
Scanning for FM Radio Stations According
to Program Type (PTY):
1. Press the ENT BND button to select either the
FM1, FM2 or FM3 radio band.
2. Press the MENU button to display the program type.
3. Press the or to select the desired program type (PTY). (Example: News,
Information, Sports, etc.)
4. Press the or button to search a station
with the selected program type (PTY).
D
S-MOD
Pod MEN
DM
Lower
EQ
W
SUB
DSP
ASM
N
6
5
ST
1
DR/CAT
OPEN
2
SC
SHF
PT
R
4
3
TE
MU
IM
VOL
D
LOU
VOL
U
Program
Type (PTY)
EQ
W
SUB
DSP
ASM
N
6
5
T
1
DR/CAT
OPEN
2
SC
SHF
PT
R
4
3
TE
MU
L
VO
D
LOU
L
VO
Higher
8
Page 9
Sound Controls
VOL
VOL
VOL
VOL
VOL
VOL
VOL
VOL
Volume:
Increase the volume by pressing the button.
Decrease the volume by pressing the button.
Increase
Decrease
TE
MU
VOL
D
LOU
L
VO
OPEN
ST
N
SC
SHF
PT
R
DIR/CAT
3
2
1
6
5
4
Bass, Treble, Balance, Fader and
Subwoofer Controls
Select the desired sound mode by pressing the
SETUP button. The modes will be displayed in
the following order: Bass, Treble, Balance, Fader,
Subwoofer Line Level Output and Subwoofer
Cutoff Frequency.
Bass:
1. Select the Bass mode (BAS) by pressing the
SETUP button.
2. Increase the Bass by pressing the button.
Decrease the Bass by pressing the button.
3. After 5 seconds control reverts back to volume
control.
Treble:
1. Select the Treble mode (TRE) by pressing the
SETUP button.
2. Increase the Treble by pressing the button.
Decrease the Treble by pressing the button.
3. After 5 seconds control reverts back to volume
control.
Increase
Decrease
Increase
Decrease
Pd MEN
TE
MU
IM
D
VOL
D
LOU
L
VO
SMOD
U
OPEN
ST
SCN
F
SH
RPT
T
DRCA
1
TE
MU
VOL
D
LOU
VOL
MU
VOL
D
LOU
VOL
4
3
2
OPEN
ST
DIRCAT
2
1
TE
OPEN
ST
DR/CAT
2
1
EQ
W
SUB
DSP
ASM
6
5
N
SC
SHF
PT
R
3
PT
R
3
6
5
4
N
SC
SHF
6
5
4
Balance:
1. Select the Balance mode (BAL) by pressing the
SETUP button.
2. To adjust the amount of sound output to the
Right speakers press the button.
To adjust the amount of sound output to the
Left speakers press the button.
BAL 00 = Equal sound right and left speakers.
BAL R12 = Right speakers only.
BAL L12 = Left speakers only.
3. After 5 seconds control reverts back to volume
control.
Right
Left
TE
MU
VOL
D
LOU
L
VO
OPEN
ST
N
SC
F
SH
PT
R
DRCAT
3
2
1
6
5
4
9
Page 10
Sound Controls (Continued)
VOL
VOL
VOL
VOL
VOL
VOL
Fader:
1. Select the Fader mode (FAD) by pressing the
SETUP button.
2. To adjust the amount of sound output to the
Rear speakers press the button.
To adjust the amount of sound output to the
Front speakers press the button.
FAD 00 = Equal sound front and rear speakers.
FAD R12 = Rear speakers only.
FAD F12 = Front speaker only.
3. After 5 seconds control reverts back to volume
control.
Subwoofer Line Level Output (SWG):
1. Select the Subwoofer Line Level Output mode
(SWG) by pressing the SETUP button.
2. To adjust the Subwoofer Line Level Output
higher press the button.
To adjust the Subwoofer Line Level Output
lower press the button.
Rear
Front
Higher
Lower
TE
MU
VOL
D
LOU
VOL
TE
MU
L
VO
D
LOU
L
VO
OPEN
ST
N
SC
SHF
PT
R
DIR/CAT
3
2
1
6
5
4
OPEN
ST
N
SC
SHF
PT
R
DIR/CAT
3
2
1
6
5
4
SWG 00 = No gain.
SWG -12 = Minimum level.
SWG +12 = Maximum level.
3. After 5 seconds control reverts back to volume
control.
Note: If subwoofer output is turned Off, Subwoofer
Line Level Output mode is not accessi
Subwoofer Output (page 11) for more informa
Note: If subwoofer output is turned Off, Subwoofer
Cutoff Frequency mode is not accessi
Subwoofer Output (page 11) for more informa
ble. See
tion.
Higher
Lower
TE
MU
L
VO
D
LOU
VOL
OPEN
ST
N
SC
SHF
PT
R
DR/CAT
3
2
1
6
5
4
Equalizer (EQ):
Press the EQ button to choose between the preset equalizer settings: Rock, Pop, Classic, Vocal,
Flat and Jazz as indicated in the display area.
10
TE
MU
DM
L
VO
D
LOU
L
VO
S-MOD
U
Pod MEN
OPEN
ST
SC
SHF
PT
R
DIR/CAT
1
4
3
2
EQ
W
SUB
DISP
ASM
N
6
5
Page 11
CD
12cm disc
MP3
12cm disc
Label side up
Do not touch
the underside
of the disc
Do not bend
Wipe the disc from
the center toward
the outside edge
Sound Controls (Continued)
Subwoofer Output:
Press and hold the EQ button to turn subwoofer
output On and Off. “SUBW ON” appears in the
display when the subwoofer is On and “SUBW
OFF” appears when the subwoofer output is
Off.“SW” appears in the display when the subwoofer is On.
Loudness:
To boost high and low tones at low volume levels, press and hold the ENT BND button until
“LOUD ON” appears in the display. To deselect,
press and hold the ENT BND button again until
“LOUD OFF” appears in the display.
Mute:
Press and release the MUTE button to mute the
volume level. If a CD is playing the MUTE button
will pause the disc. Press the MUTE button again
to restore the volume or resume playing the disc.
Pod MENU
TE
MU
DM
VOL
D
LOU
VOL
S-MOD
OPEN
ST
SW
SC
F
SH
PT
R
DI AT
1
4
3
2
EQ
SUB W
DISP
ASM
N
6
5
Hold
“SW” Subwoofer On Indicator
TE
MU
IM
D
OL
V
D
LOU
L
VO
OPEN
ST
SCN
F
SH
RPT
T
DR/CA
1
4
3
2
EQ
W
SUB
DSP
LOUD
ASM
6
5
Loud On Indicator
Hold
EQ
W
SUB
DISP
ASM
N
6
5
Pod MEN
TE
MU
DM
VOL
D
LOU
VOL
S-MOD
U
OPEN
ST
SC
F
SH
PT
R
DR/CAT
1
4
3
2
Disc Warnings
Disc Formats Supported by this Player:
Handling:
• Dirt, dust, scratches and warping disc will cause
non operation.
• Do not place stickers on disc or scratch disc.
• Do not warp discs.
• A disc should always be kept in its case when not
in use to prevent damage.
• Do not place discs in the following places: Direct
sunlight, Dirty, dusty and damp areas, Near car
heaters, Car seats or dashboard.
Disc Cleaning:
Use a dry soft cloth to wipe disc the surface. If the
disc is quite dirty, use a soft cloth slightly moist with
isopropyl (rubbing) alcohol. Never use solvents
such as benzine, thinner or conventional record
cleaners as they may mar the surface of the disc.
Note: A disc may become somewhat scratched
(although not enough to make it unusable) depending on handling and conditions in the usage environment.
11
Page 12
Disc Warnings (Continued)
Rough spots on
outside edge
Rough spots on
inside edge
Ball point pen
or pencil
Preparing New Discs with Rough Spots:
A new disc may have rough edges on its inside and
outside edges. If a disc with rough edges is used,
the proper setting will not be performed and the
player will not play the disc. Therefore, remove the
rough edges in advance by using a ball point pen
or pencil as shown. To do this, press the side of
the pen or pencil against the inside and outside
edges of the disc.
CD Operation
General Operations:
1. Press thebutton to turn the unit On.
2. Press the OPEN button to fold down the front
panel to access the CD player slot.
3. Gently insert the disc into the slot with the
label side up. The unit will automatically load
the disc.
Note: If a CD does not auto-load, DO NOT
FORCE it into the slot, as you may already have
a CD loaded as indicated by the inserted disc
icon.
i
Pod MEN
TE
MU
IM
D
VOL
D
LOU
L
VO
SMOD
U
OPEN
ST
SC
F
SH
RPT
DIRCAT
1
4
3
2
EQ
W
SUB
DISP
ASM
N
6
5
Inserted Disc Icon
Label Side Up
CD Track Selection:
Press the button to select a lower track.
Press the button to select a higher track.
The track number will appear in the display.
Fast Forward/Fast Reverse:
Push and hold the button to fast forward the
disc.
Push and hold the button to fast reverse the
disc.
12
IM
D
Lower
Track
DM
Fast
Reverse
MU
VOL
D
LOU
VOL
Higher
MU
VOL
D
LOU
VOL
Forward
TE
Track
TE
Fast
1
DR/CAT
1
DIRCAT
OPEN
2
OPEN
2
EQ
W
SUB
DSP
ASM
N
SC
SHF
PT
R
3
6
5
4
Track
Number
EQ
UB W
DISP
ASM
N
SC
F
SH
PT
R
3
6
5
4
Page 13
CD Operation (Continued)
Pausing a CD:
Press the button to pause the disc. Press it
again to resume play.
TE
MU
DIM
VOL
OPEN
EQ
SUB W
DSP
Ejecting a CD:
Press the OPEN button to fold down the front
panel to access the disc slot. Press the button to eject the disc.
Repeating a CD Track:
Select the desired track to repeat, then press the
RPT button once and “RPT” appears in the display. This track will now play repeatedly. Press
the RPT button one more time and “RPT” will
disappear from the display. The entire CD will
now be repeated.
SMOD
Pod MEN
Pod MEN
D
LOU
L
VO
U
DM
VOL
LOU
VOL
S-MOD
U
DIRCAT
2
1
1
DIR/CA
OPEN
T
2
TE
MU
D
SC
F
SH
PT
R
4
3
F
SH
RPT
4
3
ASM
N
6
5
EQ
W
SUB
DISP
ASM
SCN
6
5
Random CD Track Play Order:
Press the SHF button until “SHF” appears in the
display. The tracks on the disc will play in a random order. To cancel this feature press the SHF
button again.
Preview CD Tracks:
Press the SCN button until “SCN” appears in the
display. Each track on the disc will play for 10
seconds. To cancel this feature press the SCN
button until “SCN” disappears from the display.
EQ
W
SUB
DSP
ASM
N
6
5
EQ
W
SUB
DSP
ASM
N
6
5
1
DR/CAT
DR/CAT
1
OPEN
2
OPEN
2
SC
F
SH
PT
R
4
3
SC
F
SH
PT
R
4
3
TE
MU
IM
D
VOL
D
LOU
L
VO
S-MOD
U
Pod MEN
TE
MU
DM
VOL
D
LOU
L
VO
S-MOD
U
Pod MEN
13
Page 14
MP3 Disc Operation
General Operations:
1. Press thebutton to turn the unit On.
2. Press the OPEN button to fold down the front
panel to access the disc player slot.
3. Gently insert the disc into the slot with the
label side up. The unit will automatically load
the disc.
Note: If a disc does not auto-load, DO NOT
FORCE into the slot, as you may already have a
disc loaded.
EQ
SB W
DISP
ASM
N
6
5
ST
1
DIR/CAT
OPEN
2
SC
F
SH
PT
R
4
3
TE
MU
DM
VOL
D
LOU
VOL
S-MOD
U
Pod MEN
i
Label Side Up
Disc Track Selection:
Press the button to select a lower track.
Press the button to select higher track. The
track number will appear in the display.
Display Selection:
Press the DISP button to display the following
MP3 disc information: DIR NAME _> TITLE _>
ARTIST _> ALBUM.
Pausing a Disc:
Press the button to pause the disc. Press it
again to resume play.
DM
Lower
Track
DIM
S-MOD
N
Pd ME
S-MOD
Pod ME
1
DIRCAT
OPEN
2
SC
SHF
PT
R
4
3
TE
MU
VOL
D
LOU
L
VO
Higher
R
PT
3
R
PT
3
Number
SC
SHF
4
SHF
4
Track
1
DRCAT
1
DR/CAT
OPEN
2
OPEN
2
TE
MU
VOL
D
LOU
VOL
U
TE
MU
M
D
VOL
D
LOU
VOL
U
N
5
Track
N
5
N
SC
5
EQ
W
SUB
DISP
ASM
6
EQ
SUB W
DSP
ASM
6
EQ
SUB W
DSP
ASM
6
Ejecting a Disc:
Press the OPEN button to fold down the front
panel to access the disc slot. Press the button to eject the disc.
Repeating a Track/
Random Track Play Order/Preview Tracks:
(see "CD Operation" for details)
14
Page 15
CD Changer Operation (Option)
Load CDs into Changer:
Insert the CD magazine into the external CD
changer.
Power On/Off:
Press the button to turn the unit On.
Selecting the Play Source:
Press the MODE button until “CDC” appears in
the display.
Pod MEN
EQ
W
SUB
DISP
ASM
N
6
5
1
DIR/CAT
OPEN
2
SC
F
SH
PT
R
4
3
TE
MU
DM
VOL
D
LOU
VOL
S-MOD
U
CD Track Selection:
Press the button to select a lower track.
Press the button to select a higher track.
The track number will appear in the display.
CD Disc Selection:
Press the 1 button to select a lower disc in the
CD changer. Press the 2 button to select a higher
disc in the CD changer. The disc number will
appear in the display.
IM
D
Lower
Track
IM
D
SMOD
Pod MEN
EQ
W
SUB
DSP
ASM
6
5
EQ
W
SUB
DSP
ASM
N
6
5
1
1
DRCAT
DRCAT
OPEN
2
OPEN
2
SHF
PT
R
4
3
Track
Number
S
PT
R
4
3
SC
TE
MU
L
VO
D
LOU
VOL
Higher
Track
TE
MU
VOL
D
LOU
L
VO
U
Disc
Number
Lower
Disc
Higher
Disc
Pausing a CD:
Press the button to pause the disc. Press it
again to resume play.
i
Pod MEN
EQ
W
SUB
DISP
ASM
N
6
5
1
DIRC
OPEN
T
2
SC
F
SH
PT
R
4
3
TE
MU
IM
D
VOL
D
LOU
VOL
SMOD
U
15
Page 16
CD Changer Operation (Continued) (Option)
D-DIR
D-DIR
D-DIR
Repeating a CD Track or Disc:
Select the desired track to be repeated. Then press
the RPT button and “RPT” will appear in the display. This track will play repeatedly.
Press and hold the RPT button. “RPT” and
will appear in the display. The disc will
now play repeatedly.
To cancel either function, press the RPT button
again.
Pod MEN
EQ
SUB W
DISP
ASM
N
6
5
1
DR/CA
OPEN
T
2
SC
F
SH
PT
R
4
3
TE
MU
DM
VOL
D
LOU
L
VO
S-MOD
U
Random CD Track or Disc Play Order:
Press the SHF button and “SHF” will appear in
the display. The tracks on the current disc will
play in random order.
Press and hold the SHF button and “SHF” and
will appear in the display. The tracks on
every loaded disc will play in random order.
To cancel either function, press the SHF button
again.
Preview CD Tracks or Disc:
Press the SCN button and “SCN” will appear in
the display. Each track on the current disc will
play for 10 seconds.
Press and hold the SCN button and “SCN” and
will appear in the display. The first track
on every loaded disc will play for 10 seconds.
To cancel either function, press the SCN button
again.
SMOD
Pod MEN
Pod MENU
EQ
W
SUB
DSP
ASM
N
6
5
EQ
W
SUB
DSP
ASM
N
6
5
1
1
DRCAT
DR/CAT
OPEN
2
OPEN
2
SC
SHF
PT
R
4
3
SC
F
SH
RPT
4
3
TE
MU
IM
D
L
VO
D
LOU
L
VO
U
TE
MU
IM
D
OL
V
D
LOU
VOL
S-MOD
16
Page 17
Sirius Satellite Radio Setup (Option)
Note: If your Sirius tuner is not activated, call 1-888-539-7474 to activate. The Sirius Tuner ID Number
(ESN) is required during the activation process. Following the instructions below to access the Sirius
Tuner ID Number (ESN):
Accessing your Sirius Tuner ID Number (ESN):
1. Press the MODE button until “SIR1 RADIO”
appears in the display area.
2. Press the MENU button until “DIR” appears in
the display area.
3. Press the ENT BND button until “ESN = 00..”
appears in the display area. The ESN number
will scroll across the display.
4. Press the ENT BND button again to exit.
SMOD
Pod MEN
S-MOD
Pod MEN
EQ
W
SUB
DSP
ASM
T
S
6
5
EQ
W
SUB
DSP
ASM
SAT
N
SC
6
5
EQ
W
SUB
DISP
ASM
SAT
N
6
5
1
1
DRCAT
DR/CAT
1
DIR/CAT
OPEN
2
OPEN
2
OPEN
2
SCN
F
SH
RPT
4
3
SHF
PT
R
4
3
SC
F
SH
PT
R
4
3
TE
MU
IM
D
L
VO
D
LOU
VOL
U
TE
MU
M
D
VOL
D
LOU
L
VO
U
TE
MU
DM
VOL
D
LOU
L
VO
Sirius Satellite Radio Operation (Option)
Please note that satellite radio signal may be blocked by trees, buildings or other obstacles.
Information display during reception:
ANTENNA ERROR: When an antenna issue exists.
ACQUIRING SIGNAL: When a channel is being tuned-in (no signal is yet received).
INVALID CHANNEL: A channel without a broadcast has been selected, or the receiver may not be activated.
CALL 888-539-SIRIUS TO SUBSCRIBE: A channel not covered by your contract or the Sirius tuner is not
activated. Call Sirius Service Center 1-888-539-7474, or visit them online at
Channel Selection Modes:
Channels are selected by the following methods:
• Manual Tuning: Use the Manual Tuning method to scan thru the channels.
• Direct Tuning: Use the Direct Tuning methods when you know the desired channel.
• Category Tuning: Use the Category Tuning method when you know what category you want to scan
for a channel.
For details, see the following operation descriptions:
www.siriusradio.com
.
17
Page 18
Sirius Satellite Radio Operation (Option) (Continued)
Manual Tuning:
Press the or button until the desired
TE
MU
channel appears in the display.
DIM
VOL
D
LOU
VOL
1
DR/CAT
OPEN
2
EQ
SUB W
DSP
ASM
TLE
T
SONG
PT
R
3
SAT
N
SC
F
SH
6
5
4
Direct Tuning:
1. Press the MENU button until “DIR - - -”
appears in the display.
2. Press the or button to select the first
number of the desired channel.
Lower
Channel
DM
SMOD
Pod MENU
i
DM
Lower
Number
Higher
Channel
TE
MU
VOL
D
LOU
L
VO
TE
MU
L
VO
D
LOU
L
VO
Higher
Number
1
DIRCA
DR/CAT
1
OPEN
T
2
OPEN
2
RPT
3
PT
R
3
Channel
Number
SCN
F
SH
5
4
N
SC
SHF
5
4
EQ
W
SUB
DISP
ASM
SAT
6
EQ
W
SUB
DISP
ASM
SAT
6
3. Press the MENU button to select the next
number of the channel. Use the or
buttons to select the desired number. Repeat
this procedure for the third number.
4. Press the ENT BND button and the channel
will start playing.
18
i
SMOD
Pod MEN
EQ
W
SUB
DISP
ASM
T
S
N
6
5
EQ
W
SUB
DISP
ASM
AT
N
6
5
1
1
DIRCAT
DIRCAT
OPEN
2
OPEN
2
SC
F
SH
RPT
4
3
SC
F
SH
RPT
4
3
TE
MU
DM
OL
V
D
LOU
L
VO
U
TE
MU
IM
D
L
VO
D
LOU
L
VO
Page 19
Sirius Satellite Radio Operation (Option) (Continued)
Category Tuning:
1. Press the MENU button and “CATEGORY”
starts flashing in the display.
DM
S-MOD
od MEN
P
i
TE
MU
VOL
D
LOU
L
VO
U
EQ
SUB W
DISP
ASM
SAT
6
5
1
DIR/CAT
OPEN
2
TEGORY
CA
SHF
PT
R
4
3
Category Mode “Flashes”
2. Press the 1 or 2 button to select the
desired category.
3. Press the or button to select the
desired channel inside the category.
4. Press the ENT BND button and the channel
will start playing.
IM
D
VO
VO
SMOD
U
Pod MEN
DM
VOL
VOL
Lower Channel
in Category
DM
V
TE
MU
L
D
LOU
L
TE
MU
D
LOU
Higher Channel
in Category
TE
MU
OL
1
1
DRCAT
DR/CAT
OPEN
2
OPEN
2
OPEN
PT
R
3
PT
R
3
EGORY
T
CA
SCN
F
SH
5
Category
EGORY
T
CA
N
SC
F
SH
5
4
EQ
W
SUB
DSP
ASM
AT
6
EQ
W
SUB
DISP
ASM
SAT
6
EQ
W
SUB
DSP
Switching the Display:
Press the DISP button to cycle through the following display modes.
SONG-TITLE _> ARTIST NAME _> CATEGORY _>
SONG-TITLE…
SMOD
Pd MEN
D
LOU
L
VO
TE
MU
IM
D
L
VO
D
LOU
L
VO
U
1
DRCAT
DR/CAT
1
OPEN
2
R
C TEGORY
N
SC
SHF
PT
R
3
2
CA
SHF
PT
4
3
6
5
4
EQ
W
SUB
DS
ASM
SAT
EGORY
T
N
SC
6
5
ASM
SAT
Display Modes
19
Page 20
Sirius Satellite Radio Operation (Option) (Continued)
Memorizing a Preset Channel:
1. Press the ENT BND button to select either the
SIR1, SIR2 or SIR3 Sirius band. Each band
can memorize 6 channels for a total of 18
channels.
2. Tune-in the desired Sirius channel.
3. To memorize the channel press and hold any-
one of the six channel recall buttons until you
hear a beep.
Recalling Memorized Sirius Channel:
1. Press the ENT BND button to select either the
SIR1, SIR2 or SIR3 band.
2. Press and release the Sirius channel recall
button 1, 2, 3, 4, 5 or 6 to select the memorized channel.
Scanning Stored Sirius Channels:
Press the ASM button and the tuner will scan the
preset channels in the SIR1 band first, then
SIR2, and finally SIR3 - pausing for 5 seconds at
each channel. Scanning will continue until the
ASM button is pressed again. When a desired
channel is reached, press the ASM button again
to stop scanning.
Pod MEN
Preset Channel Indicator
EQ
SUB W
DS
ASM
SAT
N
6
5
S-MOD
Pod MEN
1
DRCA
OPEN
T
2
EGORY
T
CA
SC
F
SH
RPT
4
3
TE
MU
DIM
VOL
D
LOU
VOL
U
Sirius Channel Recall Buttons
EQ
W
SUB
DSP
ASM
SAT
6
5
EQ
W
SUB
DSP
ASM
6
1
DR/CAT
DR/CAT
1
OPEN
2
OPEN
2
RPT
3
C TEGORY
SCN
F
SH
RPT
4
3
SAT
C TEGORY
N
SC
F
SH
5
4
TE
MU
IM
D
VOL
D
LOU
VOL
S-MOD
U
Pod MEN
TE
MU
IM
D
VOL
D
LOU
L
VO
S-MOD
U
Skipping Sirius Channel: You can program the
radio to skip a Sirius channel which you do not want.
1. Tune to the channel to be skipped (see Sirius
Satellite Radio Operation for more details).
2. Press the MENU button until “SKIP” appears
in the display.
3. Press the ENT BND button until “SKIP” flashes
in the display.
4. Press the or button and wait 10 sec-
onds and “SKIP” disappears from the display.
The channel will now be skipped.
20
S-MOD
Pod MEN
EQ
W
SUB
DSP
ASM
ST
SKP
N
5
1
DR/CAT
OPEN
2
SC
SHF
PT
R
4
3
TE
MU
M
D
VOL
D
LOU
L
VO
U
Skip Indicator
EQ
W
UB
DISP
ASM
AT
SKP
N
6
5
1
DIRCA
OPEN
T
2
SC
SHF
PT
R
4
3
TE
MU
DM
L
VO
L
VO
SMOD
U
N
Pod ME
i
Page 21
Sirius Satellite Radio Operation (Option) (Continued)
Reinstating a Skipped Sirius Channel:
1. Tune to a channel next to a skipped channel.
(Example: If channel 2 is skipped, tune to
channel 1.)
2. Press the MENU button until “SKIP” appears
in the display.
3. Tune-in the skipped channel. (Example: Press
the button and “003” appears in the
display).
Note: “SKIP” will be flashing in the display on
all skipped channels.
4. Press the ENT BND button until “SKIP” stops
flashing.
5. Wait 10 seconds and “SKIP” will disappear
from the display. The channel has now been
reinstated.
IPOD Operation (Option)
General Operations:
1. Press thebutton to turn the unit On.
2. Connect an IPOD to the cable attached to the
WM1-CD.
3. The unit will automatically switch to the IPOD
mode and start playing.
Note: The IPOD controls will become inoperable,
and the WM1-CD now controls the IPOD.
i
i
SMOD
Pod MEN
SMOD
Pod MEN
Pod MEN
EQ
SUB W
DISP
ASM
AT
SKP
6
5
1
DIRCAT
OPEN
2
SCN
F
SH
PT
R
4
3
TE
MU
DM
VOL
D
LOU
VOL
U
Skip Indicator
EQ
W
UB
DISP
ASM
AT
SKP
N
6
5
EQ
W
SUB
DSP
ASM
6
5
1
1
DIRCAT
DRCA
OPEN
2
OPEN
T
2
SC
F
SH
RPT
4
3
SCN
F
SH
RPT
4
3
TE
MU
DM
L
VO
VOL
U
TE
MU
IM
D
VOL
D
LOU
L
VO
S-MOD
U
IPOD Mode Button Location and Functions:
3
E
DIM
4
MOD
S
MENU
iPod
2
1
1. Menu Button: Same operation as the MENU
button on an IPOD.
2. Next and Previous Button: Press these buttons
to scroll through the menu items, which is the
same operation as the IPOD’s Click Wheel.
MUT
VOL
LOUD
VOL
2
OPEN
SUB W
DISP
ASM
EQ
DIR CAT
1
RPT
4
3
2
6
5
SCN
SHF
3. Play/Pause Button ( ): Same operation as
the button on an IPOD.
4. ENT BND Button: Same operation as the Center
Select button on an IPOD.
21
Page 22
IPOD Operation (Option) (Continued)
Browse for a Song:
1. Press the MENU button until PLAYLIST
appears in the display.
2. Press the or button to select the
“SONG” menu.
3. Press the ENT BND button to activate the
“SONG” menu.
EQ
UB W
DISP
ASM
N
6
5
EQ
W
SUB
DISP
ASM
6
1
1
DIRCAT
DIRCAT
OPEN
2
OPEN
2
SC
SHF
PT
R
4
3
N
SC
SHF
PT
R
5
4
3
TE
MU
DM
VOL
D
LOU
VOL
SMOD
U
N
Pod ME
i
TE
MU
IM
D
VOL
D
OU
VOL
or
EQ
W
SB
DISP
ASM
N
6
5
1
DIR/CAT
OPEN
2
SC
SHF
PT
R
4
3
TE
MU
DM
VOL
D
LOU
L
VO
MENU
4. Press the button to select the desired
song from the menu. Once the button has
been used to scrolled into the song list the
button can be used to scroll backwards.
5. Press the ENT BND button to start playing the
selected song.
Pausing a Track:
Press the button to pause the track. Press it
again to resume play.
EQ
W
SUB
DSP
ASM
N
6
5
EQ
W
SUB
DISP
ASM
N
6
5
EQ
W
SUB
DISP
1
1
DR/CAT
DIRCAT
OPEN
2
OPEN
2
OPEN
SC
F
SH
PT
R
4
3
SC
SHF
PT
R
4
3
TE
MU
DM
OL
V
D
LOU
VOL
S-MOD
NU
Pod ME
TE
MU
M
D
VOL
D
LOU
L
VO
TE
MU
IM
D
VOL
22
i
SMOD
Pod MEN
D
OU
L
VO
U
DIRC T
2
1
SCN
F
SH
PT
R
4
3
ASM
6
5
Page 23
IPOD Operation (Option) (Continued)
Repeating a Track:
Select the desired track to repeat, then press the
RPT button once and “RPT” appears in the display. This track will play repeatedly. To cancel
this function press the RPT button one more
time, and “RPT” will disappear from the display.
Random Order Track Play:
Press the SHF button until “SHF” appears in the
display. The tracks on the IPOD will now play in
a random order. To cancel this feature press the
SHF button again.
Preview Tracks:
Press the SCN button until “SCN” appears in the
display. Each track on the IPOD will now play for
10 seconds. To cancel this feature press the SCN
button until “SCN” disappears from the display.
SMOD
Pd MEN
S-MOD
Pod MEN
Pod MEN
EQ
SUB W
DSP
ASM
6
5
EQ
W
SUB
DISP
ASM
N
6
5
EQ
W
SUB
DSP
ASM
N
6
5
1
1
1
DRCAT
DIR/CAT
DR/CAT
OPEN
2
OPEN
2
OPEN
2
SCN
SHF
PT
R
4
3
SC
F
SH
PT
R
4
3
SC
F
SH
PT
R
4
3
TE
MU
DIM
VOL
D
LOU
L
VO
U
TE
MU
DM
VOL
D
LOU
VOL
U
TE
MU
IM
D
VOL
D
LOU
L
VO
S-MOD
U
Display Selection:
Press the DISP button to display the following
track information: Track, Elapse Time and Song
Title.
USB Operation (Option)
General Operations:
1. Press thebutton to turn the unit On.
2. Connect a MP3 player to the USB cable com-
ing from the WM1-CD.
3. The unit will automatically switch to the USB
mode and start playing.
Note: The controls on the MP3 player will
become inoperable, and the WM1-CD will now
control the MP3 player.
Pod MEN
EQ
W
SUB
DISP
ASM
N
6
5
DR/CAT
1
OPEN
2
SC
F
SH
PT
R
4
3
TE
MU
DM
VOL
D
LOU
VOL
S-MOD
U
Display Modes
EQ
W
SUB
DISP
ASM
6
5
1
DIRCAT
OPEN
2
SCN
F
SH
RPT
4
3
TE
MU
IM
D
L
VO
D
LOU
VOL
SMOD
U
N
Pod ME
i
23
Page 24
USB Operation (Option) (Continued)
Track Selection:
Press the button to select a lower track.
Press the button to select a higher track.
The track number will appear in the display.
Display Selection:
Press the DISP button to display the following
MP3 disc information: Track, Elapse Time and
Song Title.
Pausing a Track:
Press the button to pause the track. Press it
again to resume play.
DM
Lower
Track
DM
S-MOD
U
N
Pod ME
EQ
SUB W
DSP
ASM
N
6
5
1
DR/CAT
OPEN
2
SC
F
SH
PT
R
4
3
TE
MU
VOL
D
LOU
VOL
Higher
Track
EQ
W
SUB
DISP
ASM
N
6
5
1
DIR/CAT
OPEN
2
SC
SHF
PT
R
4
3
TE
MU
VOL
D
LOU
L
VO
Display Modes
TE
MU
DM
VOL
OPEN
EQ
W
SUB
DISP
Repeating a Track:
Random Track Play Order:
Preview Tracks:
(See CD Operation for details)
Auxiliary Audio Input Operation
Selecting an Auxiliary Audio Input Play
Source:
1. Press thebutton to turn the unit On.
2. Press the MODE button until “AUX IN”
appears in the display.
3. Refer to the audio device’s owners manual for
proper operation.
Note: The WM1-CD will not control the auxiliary
source, but can adjust the sound controls.
i
Pod MEN
S-MOD
Pod MEN
SMOD
D
LOU
L
VO
U
MU
IM
D
VOL
D
LOU
L
VO
U
DIR/CAT
2
1
1
DIRCAT
OPEN
2
TE
SCN
F
SH
PT
R
4
3
SCN
F
SH
RPT
5
4
3
ASM
6
5
EQ
W
SUB
DISP
ASM
6
24
Page 25
Setup Features
VOL
VOL
VOL
VOL
VOL
VOL
Button Beep On and Off Confirmation:
Follow the instructions below to turn On or Off the
button when pressed beep confirmation.
1. Press and hold the SETUP button approxi-
mately 10 seconds until “BEEP ON” appears in
the display.
2. Press the button for beep confirmation
Off, and press the button for beep confirmation On.
3. Wait 5 seconds, and the unit will return to the
last display mode.
Primary Volume:
Follow the instructions below to adjust the initial
start-up volume level.
1. Press and hold the SETUP button approxi-
mately 10 seconds until “BEEP ON” appears in
the display. Press the SETUP button again
until “P-VOL 12” appears in the display.
i
SMOD
Pod MEN
SMOD
Pd MEN
TE
MU
DM
VOL
D
LOU
VOL
U
TE
MU
IM
D
VOL
D
LOU
VOL
U
OPEN
ST
SC
SHF
PT
R
DIRCAT
1
4
3
2
OPEN
ST
SC
F
SH
PT
R
DRCAT
1
4
3
2
EQ
UB W
DISP
ASM
N
6
5
EQ
W
SUB
DSP
ASM
N
6
5
2. Press the or button to adjust the pri-
mary volume.
3. Wait 5 seconds and the unit will return to last
display mode.
Area Radio Frequency Adjustment:
Follow the instructions below to change the area
configuration.
1. Press and hold the SETUP button approximate-
ly 10 seconds until “BEEP ON” appears in the
display. Press the SETUP button two more
times until “AREA USA” appears in the display.
2. Press the or button to adjust the
area.
Note:
If operating the unit in the USA do not
change the area.
“AREA OCE” = Australia and New Zealand.
“AREA EUR” = Europe.
3. Wait 5 seconds and the unit will return to last
display mode.
i
SMOD
Pod MEN
TE
MU
DM
L
VO
D
LOU
VOL
U
OPEN
ST
SC
F
SH
PT
R
DIRCAT
1
4
3
2
EQ
W
SUB
DISP
ASM
N
6
5
25
Page 26
Installation
2”
1
7
/
2
”
1
16
”
/
7
Sheet
Metal
Screw
Nut
Washer
Metal
Strap
Attach Metal
Strap Here
Dashboard
Mounting
Screws
Gasket
26
Snap-On
End Cap
Snap-On
End Cap
Page 27
Speaker Connections
Left
Front
Speaker
_
White/Black Wire
+
White Wire
Gray/Black Wire
Gray Wire
Right
Front
Speaker
_
+
Left
Rear
Speaker
_
Green/Black Wire
+
Powered Subwoofer
(Optional Model: LS-SUB-75)
Green Wire
Violet/Black Wire
Violet Wire
Subwoofer Output (Mono)
Right
Rear
Speaker
_
+
Green Cable
27
Page 28
Red Wire (+) to 12 Volt Ignition
Black Wire Ground
This unit for use only with a 12 Volt DC power source with a negative ground.
2-Channel
Audio Output
Amplifier (Optional)
Yellow Wire (+) to 12 Volt Constant
2-Channel
Audio Output
Amplifier (Optional)
Front
Line Out
Brown Cable
Rear
Line Out
Gray Cable
Blue Wire Amplifier Control
Auxiliary Connections
28
Page 29
RCA Connectors
TV
(Optional)
Audio Input
Yellow Cable
IPOD
(Optional)
Audio Output
ME
NU
MP3 Player
(Optional)
iPod Cable
(Optional)
MP3 Cable
(Optional)
Sirius
Antenna
(Optional)
Sirius
Receiver
(Optional)
Input Connections
29
Page 30
External Automotive
Type Antenna
(Optional)
CD Changer
(Optional)
Wired Remote Controller
(Optional Model: WRC-P1, WRC-S1, WRC-S2)
Infrared Remote Sensor
(Optional)
Input Connections
(Continued)
30
Page 31
Replaceable Fuse
If the fuse should blow, check that the wiring is
correct. If the wiring is correct, replace the fuse
with the same amperage rating as the original
(15 amp).
15 Amp Fuse
31
Page 32
Warranty
LIMITED WARRANTY
This warranty will be honored only in U.S.A.
MB Quart offers to the original purchaser a one (1) year warranty period from date of purchase. Except
as specified below, this warranty covers all defects in material and workmanship in this component.
The following are not covered by the warranty:
1. Any product which is not distributed in the U.S.A. by TriStar Distributing or which is not purchased in the U.S.A. from an authorized TriStar Distributing dealer.
2. Any product on which the serial has been defaced, modified or removed,
3. Damage, deterioration or malfunction resulting from:
a. Any shipping damage (claims must be presented to the carrier).
b. Installation or removal of the product.
c. Accident, acts of nature, misuse, abuse, neglect, unauthorized product modification or failure
to follow instructions supplied with the product.
d. Repair or attempted repair by anyone not authorized by TriStar Distributing.
e. Any other cause that does not relate to a product defect.
If within the one-year warranty period your MB Quart marine product should fail, please contact the
dealer where the product was purchased to obtain authorization for warranty service. You must include
a copy of the original dated sales receipt as proof of warranty coverage. All warranty service returns
must be shipped freight prepaid. We will pay the return shipping charges, if repairs are covered by the
warranty and we are shipping within the United States.
After the warranty period if your MB Quart Marine Product ever needs service, please call 1-800-621-2278
and ask for the service department, to determine if the repairs are feasible.
LIMITATION OF IMPLIED WARRANTIES
ALL IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE LENGTH OF THIS WARRANTY.
EXCLUSION OF DAMAGES
TriStar Distributing liability for any defective product is limited to the repair or replacement of the product at our discretion. TriStar Distributing shall not be liable for:
1. Installation or removal, damage to other property caused by any defects in components, damages
based upon inconvenience, loss of use of the product; or any other damages, whether incidental,
consequential or otherwise.
2. Some states do not allow limitations on how long an implied warranty lasts and/or do not
allow the exclusion or limitation of incidental or consequential damages, so the above limitations
and exclusions may not apply to you.
This warranty gives you specific rights, and you may have other rights, which may vary from state to
state.
If a problem develops during or after the Limited Warranty Period; or if you have any questions regarding the operation of the product, you should contact TriStar Distributing warranty department.