MB QUART ONX254, ONX302, ONX304, ONX304SQ User Manual

5 (1)

ONYX

ONX254 / ONX302 / ONX304 ONX304SQ

Thank you for choosing the MB Quart ONYX subwoofer for your car audio sound system. With proper installation, you are on the path to experiencing your music in a way you only imagined possible. Here at MB Quart, we call this “Sound In Every Detail.”

The ONYX series subwoofers have been designed for the enthusiast looking for incredible bass and great cosmetics in their woofer. The ONYX series subwoofer feature the following:

- Illuminating ONYX Logo

- Spade Style Speaker Terminals

- Gloss Black Polypropylene Cone

- High Energy Magnet

- NBR Rubber Surround

- Heat-Dispersing Vented Pole Plate

- Red Nomex Spider

- Anti-Resonant ABS Magnet Cover

 

 

 

 

ONX254 / ONX302 / ONX304 / ONX304SQ

ONX254 / ONX302 / ONX304 / ONX304SQ

The diagram below shows a screw pattern for mounting your subwoofer.

M4 X 35

ILLUMINATION WIRING: Option 1

- Connect the LED + spade terminal to an accessory switched 12 volt wire. This wire should have +12V when the ignition key is “on” and 0 volts when the ignition key is “off”. You can use a toggle switch in line on this wire to manual turn the illumination off if desired and this 12V+ wire must have a 5 amp fuse in line.

Option 2

- Connect the LED + spade terminal to the Radio / CD player “remote out” wire which is also connected to the amplifier “remote” input terminal. This ire will show 12 volts when the radio is “on” and 0 volts when the radio is “off”

Connect the LED - spade terminal to chassis ground.

 

LED

 

LED +

+

-

LED -

 

 

Speaker Wire +

 

 

Speaker Wire -

1

MB QUART ONX254, ONX302, ONX304, ONX304SQ User Manual

ONX254

4mm.127 5 / 02”.

231.4mm / 9.11”

4

8

4

8

DVC

 

DVC

 

8

 

8

 

35

 

35

 

25.4 cm / 10”

25.4 cm / 10”

4

8

4

8

DVC 4

 

DVC 4

 

8

 

8

 

35

 

35

 

25.4 cm / 10”

25.4 cm / 10”

141.4mm / 5.57”

4 8

DVC 4

8 35

25.4 cm / 10”

4

DVC 4

8

35

25.4cm / 10”

2

Loading...
+ 7 hidden pages