MBM Corporation QuickJog paper jogger User Manual

PO BOX 40249

INSTALLATION INSTRUCTIONS

This machine is designed to produce a very strong vibration. Vibration is always associated
with noise: the more vibration, the more noise should be expected.

To reduce the amount of noise and to get the best performance from the QuickJog, please
follow these steps:

v Set the machine on a heavy/sturdy table (500 lb. capacity).
v Do not set any other objects or machines on the same table. Small objects or tools will

add noise.

v Keep the table free of dust, oil, etc.
v Never leave the QuickJog unattended while in operation.

TIPS

For best results and where noise level is a concern, use a small (13" x 16") piece of rubber, rug
or cardboard underneath the base of the jogger.

Never pick up, grab, lift or handle this machine from the to p section. It must be carried only
by holding it from the bottom base.

The amount of vibration and the angle of the bin are factory-set for the ideal set up to better
handle all types of paper stock.

To decrease vibration: using a 1/8", 4" long allen wrench through the opening on the back
section of the jogger, rotate the outside (RH) collar away from the other collars. A full turn of
this collar will reduce the overall vibration by 20 to 25%. Do not disassemble the machine.

To increase vibration: us ing a 1/8", 4" long allen wrench,
turn and align all the collars to the same position.

Thank you for your purchase of the
QuickJog® Paper Jogger.

N. CHARLESTON, SC 29423-0249

[phone]

FAX: [phone]