@
THANK YOU for purchasing this high-quality product. Ifyou should experience a problem not covered inTROUBLESHOOTING,
please visit our website at www.maytag.com for additional information. If you still need assistance, call us at 1-800-688-9900.
In Canada, visit our website at www.maytag.ca or call us at 1-800-807-6777 for additional information
You will need your model and serial number, located on the oven frame behind the top right side of the oven door.
Para obtener acceso a "lnstrucciones para elusuario de laestufa electrica" enespaSol, o para obtener informaci6n adicional acerca
de su producto, visite: www.maytag.com
Debera tener a mano el nQmerode modelo y de serie, que estan ubicados en el marco del homo, detras del lado derecho superior
de la puerta del homo.
TableofContents
RANGE SAFETY ...................................................................................... 2
The Anti-Tip Bracket ............................................................................ 2
FEATURE GUIDE .................................................................................... 4
COOKTOP USE ....................................................................................... 5
Cookware ............................................................................................. 7
Home Canning ..................................................................................... 8
OVEN USE ............................................................................................... 8
Electronic Oven Controls ..................................................................... 8
Sabbath Mode .................................................................................... 10
Aluminum Foil..................................................................................... 10
Positioning Racks and Bakeware ...................................................... 10
Oven Vent ........................................................................................... 11
Baking and Roasting .......................................................................... 11
Broiling ................................................................................................ 11
Convection Cooking ........................................................................... 11
Cook Time .......................................................................................... 12
Warming Drawer (on some models) ................................................... 12
RANGE CARE ........................................................................................ 13
Clean Cycle ........................................................................................ 13
General Cleaning ................................................................................ 14
Appliance Outlets (on some models) ................................................. 15
Oven Light .......................................................................................... 15
TROUBLESHOOTING ........................................................................... 15
ACCESSORIES ...................................................................................... 16
WARRANTY ........................................................................................... 17
W10667173A
SP PN W10671562A
RANGESAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
The range will not tip during normal use. However, the range can tip if you apply too much force or weight to the open door without having
the anti-tip bracket fastened down properly.
Tip Over Hazard
A child or adult can tip the range and be killed.
Verify the anti-tip bracket has been properly installed and engaged per installation instructions.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed and engaged.
Failure to follow these instructions can result in death or serious burns to children and adults.
To verify the anti-tip bracket is installed and engaged:
Bracket
Anti-Tip
Range Foot
State of California Proposition 65 Warnings:
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other
reproductive harm.
• Slide range forward.
• Look for the anti-tip bracket securely attached to floor or wall.
• Slide range back so rear range foot is under anti-tip bracket.
• See installation instructions for details.
iMPORTANT SAFETY iNSTRUCTiONS
WARN(NG: To reduce the risk of fire, electrical shock,
injury to persons, or damage when using the range, follow
basic precautions, including the following:
[] WARNING: TO REDUCE THE RISK OF TIPPING OF
THE RANGE, THE RANGE MUST BE SECURED BY
PROPERLY INSTALLED ANTI-TIP DEVICES. TO CHECK
IF THE DEVICES ARE INSTALLED PROPERLY, SLIDE
RANGE FORWARD, LOOK FOR ANTI-TIP BRACKET
SECURELY ATTACHED TO FLOOR OR WALL, AND
SLIDE RANGE BACK SO REAR RANGE FOOT IS
UNDER ANTI-TIP BRACKET.
[] CAUTION: Do not store items of interest to children in
cabinets above a range or on the backguard of a range -
children climbing on the range to reach items could be
seriously injured.
[] Proper Installation - Be sure the range is properly installed
and grounded by a qualified technician.
[] Never Use the Range for Warming or Heating the Room.
[] Do Not Leave Children Alone - Children should not be left
alone or unattended in area where the range is in use.
They should never be allowed to sit or stand on any part of
the range.
[] Wear Proper Apparel - Loose-fitting or hanging garments
should never be worn while using the range.
[] User Servicing - Do not repair or replace any part of the
range unless specifically recommended in the manual. All
other servicing should be referred to a qualified technician.
[] Storage in or on the Range - Flammable materials should
not be stored in an oven or near surface units.
[] Do Not Use Water on Grease Fires - Smother fire or flame
or use dry chemical or foam-type extinguisher.
[] Use Only Dry Potholders - Moist or damp potholders on
hot surfaces may result in burns from steam. Do not let
potholder touch hot heating elements. Do not use a towel
or other bulky cloth.
[] DO NOT TOUCH SURFACE UNITS OR AREAS NEAR
UNITS - Surface units may be hot even though they are
dark in color. Areas near surface units may become hot
enough to cause burns. During and after use, do not touch,
or let clothing or other flammable materials contact surface
units or areas near units until they have had sufficient time
to cool. Among those areas are the cooktop and surfaces
facing the cooktop.
[] Use Proper Pan Size - The range is equipped with one or
more surface units of different size. Select utensils having
flat bottoms large enough to cover the surface unit heating
element. The use of undersized utensils will expose a
portion of the heating element to direct contact and may
result in ignition of clothing. Proper relationship of utensil to
burner will also improve efficiency.
[] Never Leave Surface Units Unattended at High Heat
Settings - Boilover causes smoking and greasy spillovers
that may ignite.
[] Make Sure Reflector Pans or Drip Bowls Are in Place -
Absence of these pans or bowls during cooking may
subject wiring or components underneath to damage.
[] Protective Liners - Do not use aluminum foil to line surface
unit drip bowls or oven bottoms, except as suggested in
the manual. Improper installation of these liners may result
in a risk of electric shock, or fire.
[] Glazed Cooking Utensils - Only certain types of glass,
glass/ceramic, ceramic, earthenware, or other glazed
utensils are suitable for range-top service without breaking
due to the sudden change in temperature.
[] Utensil Handles Should Be Turned Inward and Not Extend
Over Adjacent Surface Units - To reduce the risk of burns,
ignition of flammable materials, and spillage due to
unintentional contact with the utensil, the handle of a
utensil should be positioned so that it is turned inward, and
does not extend over adjacent surface units.
[] Do Not Soak Removable Heating Elements - Heating
elements should never be immersed in water.
[] Do Not Cook on Broken Cooktop - If cooktop should
break, cleaning solutions and spillovers may penetrate the
broken cooktop and create a risk of electric shock. Contact
a qualified technician immediately.
[] Clean Cooktop With Caution - If a wet sponge or cloth is
used to wipe spills on a hot cooking area, be careful to
avoid steam burn. Some cleaners can produce noxious
fumes if applied to a hot surface.
[] Use Care When Opening Door - Let hot air or steam
escape before removing or replacing food.
[] Do Not Heat Unopened Food Containers - Build-up of
pressure may cause container to burst and result in injury.
[] Keep Oven Vent Ducts Unobstructed.
[] Placement of Oven Racks - Always place oven racks in
desired location while oven is cool. If rack must be moved
while oven is hot, do not let potholder contact hot heating
element in oven.
[] DO NOT TOUCH HEATING ELEMENTS OR INTERIOR
SURFACES OF OVEN - Heating elements may be hot even
though they are dark in color. Interior surfaces of an oven
become hot enough to cause burns. During and after use,
do not touch, or let clothing or other flammable materials
contact heating elements or interior surfaces of oven until
they have had sufficient time to cool. Other surfaces of the
appliance may become hot enough to cause burns - among
these surfaces are oven vent openings and surfaces near
these openings, oven doors, and windows of oven doors.
For self-cleaning ranges -
[] Do Not Clean Door Gasket - The door gasket is essential
for a good seal. Care should be taken not to rub, damage,
or move the gasket.
[] Do Not Use Oven Cleaners - No commercial oven cleaner
or oven liner protective coating of any kind should be used
in or around any part of the oven.
[] Clean Only Parts Listed in Manual.
[] Before Self-Cleaning the Oven - Remove broiler pan and
other utensils.
For units with ventilating hood -
[] Clean Ventilating Hoods Frequently - Grease should not
be allowed to accumulate on hood or filter.
[] When flambeing foods under the hood, turn the fan on.
SAVE THESE INSTRUCTIONS
FEATUREGUIDE
This manual covers several models. Your model may have some or all of the items listed. Refer to this manual or Frequently Asked
Questions (FAQs) section of our website at www.maytag.com for more detailed instructions. In Canada, reference the Customer Service
section at www.maytag.ca.
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
bake broil detay cook
convect convect c0nvect power
bake br0i[ roast preheat
keep warming on off
warm drawer o o
+°°+++°++ +++++,++®+
start time
warming center
o_o
Aquabift settings centrot kitchen dock
setfclean t0ck timer
2 3
5 6
8 9
0 tight
KEYPAD FEATURE INSTRUCTIONS
CLOCK Clock This clock can use a 12- or 24-hour cycle. See "Oven Use" section.
1. Press SE-FI-INGS once.
2. Press START to change the time.
3. Press "3" for AM or "6" for PM.
4. Press the number keypads to set the time of day.
5. Press START.
LIG oven cavity light While the oven dooi is Closed, piess the OVEN LIGHT keypad to turn the light on and off, The
oven !ight wi!! come on whenthe oven door is opened,
KITCHEN
TIMER
ON/OFF
Oven timer
The Timer can be set in hours or minutes up to 9 hours and 59 minutes.
1. Press KITCHEN TIMER.
2. Press the number keypads to set the length of time in hr-hr-min-min. Leading zeroes do not
have to be entered. For example, for 2 minutes, enter "2."
3. Press KITCHEN TIMER or START to begin the countdown. If enabled, end-of-cycle tones
will sound at end of countdown.
4. Press KITCHEN TIMER twice to cancel the Kitchen Timer and return to the time of day. Do
not press the Cancel keypad because the oven will turn off.
5. If the Kitchen Timer is running, but not in the display, press KITCHEN TIMER to display the
countdown for 5 seconds.
START Cooking start The Start pad begins any oven funCtion !f Start is not pressed within 2 minutes after pressing a
keypad, the function is canceled and the time of day is displayed,
CANCEL Range function The Cancel keypad stops any oven function except the Clock, Kitchen Timer, Control Lock and
Warming Drawer.
Baking and 11 Press BAKE.
roasting
i 2. Press the number keypads to set a temperature other than 350 F(175 C) in5 increments
o o o
5. Press CANCELwhen finished,
BROIL Broiling 1. Press BROIL.
2. Select the broiling temperature by pressing 1 - high (500°F [260°C]), 2 - medium (450°F
[232°C]) or 3 - low (400°F [204°C]). The default setting is high.
3. Press START and allow the oven to preheat for 5 minutes.
4. Position the cookware in the oven and leave the door open 6" (15 cm) at the broil stop
position.
5. Press CANCEL when finished.
KEYPAD FEATURE INSTRUCTIONS
............................... 4. To change ti!e temperature, repeat steps ! and 2. Press START for the change t0 takeeffect,
5. Press CANCEL when finished.
CONVECT Convection
ROAST cooking
1. Press CONVECT ROAST.
2. Press the number keypads to set a temperature other than 325°F (163°C) in 5° increments
between 170°F and 500°F (77°C and 260°C).
3. Press START. Auto conversion will reduce the temperature by 25°F (15°C).
4. To change the temperature, repeat steps 1 and 2. Press STARTfor the change to take effect.
5. Press CANCEL when finished.
CONVECT convection 11 Press CONVECT BROIL
BROIL cook ng o o
i Press the number keyPads t0set a temperature other than 350 F (i77 c)increments
between 170 F and 500 F (77 C and 260 C).
Press START.Auto conversion wil! reduce the temperature by 25 F (i5 C)I
o
4, change the temperature, repeat steps 1 and 21PreSsSTARTfor the change to take effeCL
5. Press CANCEL when finished.
KEEP WARM Hold warm Food must be at serving temperature before placing it in the warmed oven.
1. Press KEEP WARM.
2. Set temperature between 145°F (63°C) and 190°F (88°C) using the number keypads. The
default temperature is 170°F (75°C).
3. Press START.
4. Press CANCEL when finished.
DELAY START Delayed start The DELAYSTART keypad is Used to enter the starting time for an oven function with a delayed
start,
COOK TIME Timed cooking Timed Cooking allows the oven to be set to turn on at a certain time of day, cook for a set length
of time, and/or shut off automatically. Delay start should not be used for foods such as breads
and cakes because they may not bake properly.
To set a Timed Cook or a Delayed Timed Cook, see "Cook Time" section.
POWER Rapid Pr0vides the fastest preheat time for the BAKE function:
PREHEAT preheating 1' Press POWER PREHEAT.
Press the number keYpads in response to the scro!l ng text to enter the Bake temperature:
3. Press START.
4. Aieminder tone Will Sound when the preheat temperature is reached. PlaCe fo0d insidethe
oven.
NOTE: This feature should be used only for one-iack bakingl Unused racks should be iemoved
prior to Power Preheat. A standard flat rack should be used for Power Preheat.
If Preheating foi the Bake cYcle has already started, Power Preheat maY be started directly by
pressing Power preheat,
WARMING
CENTER
ON/OFF
Warming zone Press WARMING CENTER ON to select the warming element on the cooktop, then press
START.
Press WARMING CENTER OFF to turn off the warming element.
ON/OFF 3, Press WARMING DRAWER to tuin off the heating eiementl
seethe warming Drawer section for more information_
CLEAN Clean cycle See the "Clean Cycle" section.
CONTROL Oven control No keypads wi!l funCtion with the controls locked.
LOCK lockout 1. check that the oven and the Kitchen Timer are off.
hold 3 sec. to
10 k 2 Press and hold CONTROL LOCK keypad for 3 seconds
C "
3. If enabled, a tone will sound, and ,,CONTROL LOCKED,, will be displayed.
4, Repeat to un!ock,
SETTINGS Oven use Enables you to personalize the audible tones and oven operation to suit your needs. See the
functions "Oven Use" section.
COOKTOPUSE
Use cookware about the same size as the surface cooking
area. Cookware should not extend more than 1/2"(1.3 cm)
outside the area.
/ / B
/
I \
Fire Hazard
Turn off all controls when done cooking.
Failure to do so can result in death or fire.
The control knobs can be set to anywhere between HIGH and
LOW. Push in and turn to setting.
may become hot.
I EMEMBER: When range is in use, the entire cooktop area I
Ceramic Glass
The surface cooking area will glow red when an element is on.
Some parts of the surface cooking area may not glow red when an
element is on. This is normal operation. It may cycle on and off to
maintain the selected heat level.
It is normal for the surface of light colored ceramic glass to appear
to change color when surface cooking areas are hot. As the glass
cools, it will return to its original color.
Clean the cooktop after each use to help avoid scratches, pitting,
abrasions and to condition the glass surface. Ceramic glass
cooktop cleaner and a cooktop scraper are also recommended for
stubborn soils. Do not use abrasive cleaners, cleaning pads or
harsh chemicals for cleaning. The Cooktop Care Kit Part Number
31605 contains all of the items needed to clean and condition your
ceramic glass cooktop. Refer to the "Range Care" section for
additional information.
IMPORTANT: To avoid permanent damage to the cooktop surface
and to make soils easier to remove, clean the cooktop after each
use to remove all soils.
• Avoid storing jars or cans above the cooktop. Dropping a heavy or
hard object onto the cooktop could crack the cooktop.
To avoid damage to the cooktop, do not leave a hot lid on the
cooktop. As the cooktop cools, air can become trapped
between the lid and the cooktop, and the ceramic glass could
break when the lid is removed.
For foods containing sugar in any form, clean up all spills and
soils as soon as possible. Allow the cooktop to cool down
slightly. Then, while wearing oven mitts, remove the spills using
a scraper while the surface is still warm. If sugary spills are
allowed to cool down, they can adhere to the cooktop and can
cause pitting and permanent marks.
To avoid scratches, do not slide cookware or bakeware across
the cooktop. Aluminum or copper bottoms and rough finishes
on cookware or bakeware could leave scratches or marks on
the cooktop.
Do not cook popcorn in prepackaged aluminum containers on
the cooktop. They could leave aluminum marks that cannot be
removed completely.
To avoid damage to the cooktop, do not allow objects that
could melt, such as plastic or aluminum foil, to touch any part
of the entire cooktop.
To avoid damage to the cooktop, do not use the cooktop as a
cutting board.
\ !
\_._ ...........................C
A. Surface cooking area
B. Cookware/canner
C. Y2"(1.3 cm) maximum overhang
Use flat-bottomed cookware for best heat conduction and
energy efficiency. Cookware with rounded, warped, ribbed or
dented bottoms could cause uneven heating and poor cooking
results.
I
Determine flatness by placing the straight edge of a ruler
across the bottom of the cookware. While you rotate the ruler,
no space or light should be visible between it and the
cookware.
Cookware designed with slightly indented bottoms or small
expansion channels can be used.
Make sure the bottoms of pots and pans are clean and dry
before using them. Residue and water can leave deposits when
heated.
To avoid damage to the cooktop, do not cook foods directly on
the cooktop.
Cooktop On Indicator Light
The Cooktop On indicator light is located on the console panel.
When any control knob on the console panel is turned on, the
Cooktop On indicator light will glow.
Hot Surface Indicator Light
On ceramic glass models, the hot surface indicator light is located
on the console panel.
The hot surface indicator light will glow as long as any surface
cooking area is too hot to touch, even after the surface cooking
area is turned off.
Triple-Choice TM Element
The Triple-Choice TM Element offers flexibility depending on the size
of the cookware. Single size can be used in the same way as a
regular element. The dual and triple sizes combine single, dual and
outer element and are recommended for larger size cookware,
large quantities of food, and home canning.
elf
|ow
v high
_'high
@
o o
0Oo
B
A. Single
B. Dual
C. Triple
Melt Element
The Melt Cooking Zone offers flexibility due to a wide range of
settings between High and Melt. The High heat option can be used
to boil small amounts of liquid quickly. To reduce the power setting,
turn the knob clockwise. The Melt setting is designed for delicate
foods that require low heat, such as when melting chocolate or
holding sauces. Use cookware appropriate in size for the Melt
Cooking Zone.
off
A melt
,r high .,,.,,B
,/
reed
000
0 ®
A. Melt option
B. High heat option
Warming Center Element
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
Use the Cooktop Warming Center element to keep cooked foods
warm. One hour is the recommended maximum time to maintain
food quality.
Do not use it to heat cold foods.
The Warming Center element can be used alone or when any of the
other surface cooking areas are being used.
The Warming Center element area will not glow red when cycling
on. However, the Element On light will glow while the Cooktop
Warming Center element is in use.
• Use only cookware recommended for oven and cooktop use.
Cover all foods with a lid or aluminum foil. When warming
baked goods, allow a small opening in the cover for moisture to
escape.
To avoid damage to the cooktop, do not use plastic wrap to
cover food because the plastic wrap may melt.
Use pot holders or oven mitts to remove food.
IMPORTANT: Do not leave empty cookware on a hot surface
cooking area, element or surface burner.
Ideal cookware should have a flat bottom, straight sides and a well-
fitting lid, and the material should be of medium-to-heavy
thickness.
Rough finishes may scratch the cooktop. Aluminum and copper
may be used as a core or base in cookware. However, when used
as a base they can leave permanent marks on the surfaces.
Cookware material is a factor in how quickly and evenly heat is
transferred, which affects cooking results. A nonstick finish has the
same characteristics as its base material. For example, aluminum
cookware with a nonstick finish will take on the properties of
aluminum.
Cookware with nonstick surfaces should not be used under the
broiler.
warming center
on off
0 0
0®0
To Use:
1. To turn on, press WARMING CENTER ON and then START.
2. To turn off, press WARMING CENTER OFF.
Check for flatness by placing the straight edge of a ruler across the
bottom of the cookware. While you rotate the ruler, no space or
light should be visible between it and the cookware.
Usethefollowingchartasaguideforcookwarematerial
characteristics.
COOKWARE CHARACTERISTICS
Aluminum •
Cast iron
Ceramic or
Ceramic glass
Copper
Heats quickly and evenly.
Suitable for all types of cooking.
Medium or heavy thickness is best for
most cooking tasks.
May leave aluminum residues, which
may be diminished if cleaned
immediately after cooking.
• Heats slowly and evenly.
• Good for browning and frying.
• Maintains heat for slow cooking.
• Rough edges or burrs may scratch the
cooktop.
• Follow manufacturer's instructions.
• Heats slowly, but unevenly.
• Ideal results on low to medium heat
settings.
• May scratch the cooktop.
Heats very quickly and evenly.
May leave copper residues, which
may be diminished if cleaned
immediately after cooking
Can leave a permanent stain or bond
to the cooktop if overheated.
COOKWARE CHARACTERISTICS
Earthenware • Follow manufacturer's instructions.
• Use on low heat settings.
• May scratch the cooktop.
Porcelain •
enamel-on- •
steel or cast
iron
Stainless steel • Heats quickly, but unevenly.
Use flat-bottomed cookware for best cooking results and energy
efficiency. The cookware should be about the same size as the
cooking area outlined on the cooktop. Cookware should not extend
more than 1/2"(1.3 cm) outside the area.
See stainless steel or cast iron.
Porcelain enamel bakeware without
the metal base may bond to the
cooktop if overheated.
• A core or base of aluminum or copper
on stainless steel provides even
heating.
Canning can be performed on a glass smooth top cooking surface
or traditional coil element cooktop. When canning for long periods,
alternate the use of surface cooking areas or elements between
batches. This allows time for the most recently used areas to cool.
• Center the canner on the largest surface cooking area or
element. On electric cooktops, canners should not extend
more than 1/2"(1.3 cm) beyond the surface cooking area or
element.
OVENUSE
Odors and smoke are normal when the oven is used the first few
times, or when it is heavily soiled.
Control Display
The display will flash when powered up or after a power loss. Press
CANCEL to clear. When oven is not in use, the time of day is
displayed. Indicator lights show functions that are in use.
Tones
Tones are audible signals, indicating the following:
One tone
• Valid pad press
• Oven is preheated (long tone)
• Function has been entered
• Reminder (on some models), repeating each minute after the
end-of-cycle tones
• Do not place canner on 2 surface cooking areas or elements at
the same time.
• On ceramic glass models, use only flat-bottomed canners to
avoid damage to the cooktop and elements.
• For more information, contact your local agricultural extension
office, or refer to published home canning guides. Companies
that manufacture home canning products can also offer
assistance.
IMPORTANT: The health of some birds is extremely sensitive to the
fumes given off. Exposure to the fumes may result in death to
certain birds. Always move birds to another closed and well-
ventilated room.
Three tones
• Invalid pad press
Four tones
• End of cycle
Use the Settings key to change the tone settings.
Settings
Many features of the oven control can be adjusted to meet your
personal needs. These changes are made using the Settings key.
Use the Settings key to scroll through the features that can be
changed. Each press of the Settings key will advance the display to
the next setting. After selecting the feature to be changed, the
control will prompt you for the required input. After the setting is
saved by pressing Start, the control will exit Settings and display
the time of day. Details of all of the feature changes are explained in
the following sections.
Press CANCEL to exit Settings.
Clock Time of Day
This clock can use a 12- or 24-hour cycle. To adjust, see
"12/24 Hour Clock" in this section.
Check that the oven and Timer are off.
To Change Time of Day:
1. Press SE-i-i-INGS once. After 3 seconds, "SET CLOCK-PUSH
START TO CHANGE" will be displayed.
2. Press START to display the current setting.
3. Press "3" for AM or "6" for PM.
4. Press the number keypads to set the time of day.
5. Press START.
6. Press CANCEL to exit.
Oven Temperature Offset Control
IMPORTANT: Do not use a thermometer to measure oven
temperature because opening the oven door may cause element
cycling to give incorrect readings.
The oven provides accurate temperatures; however, it may cook
faster or slower than your previous oven, so the temperature can
be adjusted to personalize it for your cooking needs. It can be
changed in Fahrenheit or Celsius.
To Adjust Oven Temperature:
1. Press SE-i-i-INGS until "TEMP OFFSET" is displayed.
2. Press START to display the current setting.
3. Press the "3" keypad to increase the temperature in 5°F (3°C)
increments, or press the "6" keypad to decrease the
temperature in 5°F (3°C) increments. The range is from -30°F to
+30°F (-18°C to +18°C).
4. Press START to save the setting.
5. Press CANCEL to exit.
Fahrenheit and Celsius
The temperature is preset at Fahrenheit, but can be changed to
Celsius.
To change:
1. Press SE-i-i-INGS until "TEMP UNIT" is displayed.
2. Press START to display the current setting.
3. Press the "3" keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.
Audible Tones Disable
Turns off all tones, including the end of cycle tone and key press
tones. Reminder tones are still active when all tones are disabled.
1. Press SE-i-i-INGS until "ALL SOUNDS" is displayed.
2. Press START to display the current setting.
3. Press the "3" keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.
End of Cycle Tone
Activates or turns off the tones that sound at the end of a cycle.
1. Press SE-i-i-INGS until "CYCLE TONE END" is displayed.
2. Press START to display the current setting.
3. Press the "3" keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.
Reminder Tones Disable
Turns off the short repeating tone that sounds every 1 minute after
the end of cycle tones.
1. Press SE-i-i-INGS until "REMINDER TONE" is displayed.
2. Press START to display the current setting.
3. Press the "3" keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.
Key Press Tones
Activates or turns off the tones when a keypad is pressed.
1. Press SE-i-i-INGS until "KEY PRESS TONE" is displayed.
2. Press START to display the current setting.
3. Press the "3" keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.
Tone Pitch
Sets the pitch of the tone to either high or low.
1. Press SE-i-i-INGS until "TONE PITCH" is displayed.
2. Press START to display the current setting.
3. Press the "3" keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.
Demo Mode
IMPORTANT: This feature is intended for use on the sales floor
with 120 V power connection and permits the control features to be
demonstrated without heating elements turning on. If this feature is
activated, the oven will not work.
1. Press SE-i-i-INGS until "DEMO MODE" is displayed.
2. Press START to display the current setting.
3. Press the "3" keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.
12-Hour Shutoff
The oven control is set to automatically shut off the oven 12 hours
after the oven initiates a cook or clean function. This will not
interfere with any timed or delay cook functions.
1. Press SE-i-i-INGS until "12-HR SHUT-OFF" is displayed.
2. Press START to display the current setting.
3. Press the "3" keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.
12/24 Hour Clock
1. Press SE-i-i-INGS until "12/24 HR" is displayed.
2. Press START to display the current setting.
3. Press the "3" keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.
Languages - Scrolling Display Text
Language options are English, Spanish and French.
1. Press SE-i-i-INGS until "LANGUAGE" is displayed.
2. Press START to display the current setting.
3. Press the "3" keypad to adjust the setting.
4. Press START to save the setting.
5. Press CANCEL to exit.
TheSabbathModesetstheoventoremainoninabakesetting
untilturnedoff.
WhentheSabbathModeisset,onlytheBakecyclewilloperate.All
othercookingandcleaningcyclesaredisabled.Notoneswill
sound,andthedisplayswillnotshowmessagesortemperature
changes.
Whentheovendoorisopenedorclosed,theovenlightwillnotturn
onoroffandtheheatingelementswillnotturnonoroffimmediately.
To Enable Sabbath Mode Capability (one time only):
1. Open oven door.
2. Press 7-8-9-6.
"SABBATH ON" or "SABBATH OFF" and "PRESS START TO
ENTER" will appear in the display.
3. Press START to change the displayed status.
4. Close oven door. Sabbath Mode can be used for baking.
NOTE: To disable the Sabbath Mode, repeat steps 1 - 3 to
change the status from "SABBATH ON" to "SABBATH OFE"
IMPORTANT: To avoid permanent damage to the oven bottom For best cooking results, do not cover entire oven rack with foil
finish, do not line the oven bottom with any type of foil or liner, because air must be able to move freely.
To Activate Sabbath Mode:
1. Press BAKE.
2. Press the number keypad to set a temperature other than
350°F (177°C).
3. Press START.
For timed cooking in Sabbath Mode, press COOK TIME, then
the number keypad to set the desired cook time.
4. Press SE-I-I-INGS,then press "7." "SAb" will appear in the display.
To Adjust Temperature (when Sabbath Mode is running):
1. Press the number keypad as instructed by the scrolling text to
select the new temperature.
NOTE: The temperature adjustment will not appear on the
display. The scrolling text will be shown on the display as itwas
before the keypad was pressed.
2. Press START.
To Deactivate Sabbath Mode:
Press SETTINGS, then press "7" to return to regular baking or
press CANCEL to turn off the range.
IMPORTANT: To avoid permanent damage to the porcelain finish,
do not place food or bakeware directly on the oven door or bottom.
Bakeware
To cook food evenly, hot air must be able to circulate. Allow
2" (5 cm) of space around bakeware and oven walls. Make sure
that no bakeware piece is directly over another.
Racks
• Position racks before turning on the oven.
• Do not move racks with bakeware on them.
• Make sure racks are level.
To move a rack, pull it out to the stop position, raise the front edge,
and then lift out. Use the following illustration and charts as a
guide.
7 m
6--
5--
4--
3--
2--
1--
The oven has 7 positions for a flat rack, as shown in the previous
illustration and the following table.
Flat Rack Position* Type of Food
Broiling/searing meats, hamburgers,
steaks
6
3 or4
2
Broiled meats, poultry, fish
Most baked goods, casseroles
Roasted meats
Large roasts or poultry
2V2- 3V2minutes. Side 2 should cook for approximately
4-5 minutes. Expect a moderate degree of smoke when broiling.
*If your model has a Max Capacity Rack, the recessed ends must
be placed in the rack position above the desired position of the
food. See the following illustration.
A
B
A. Ends of rack in position 3
B. Food in position 2
IMPORTANT: These rack positions are for flat racks. If a Max
Capacity Rack is used, the rack position must be adjusted as
shown in the previous figure.
Multiple Rack Cooking
2-rack: Use rack positions 2 and 5 for regular baking.
2-rack (convection only): Use rack positions 2 and 5; or 3 and 6.
3-rack (true convection only): Use rack positions 1,4 and 7; or 2, 4
and 6.
For hamburger patties to have a well-seared exterior and a rare
interior, use rack position 7. Side 1 should cook for approximately
10
Baking Cookies and Layer Cakes on 2 Racks
Baking Layer Cakes
For best results when baking cakes on 2 racks, use the Convect
Bake function and racks 2 and 5. Place the cakes on the racks as
shown.
Baking Cookies
For best results when baking cookies on 2 racks, use the Convect
Bake function and rack positions 2 and 5.
The oven vent releases hot air and moisture from the oven, and
should not be blocked or covered. Blocking or covering the oven
vent will cause poor air circulation, affecting cooking and cleaning
results. Do not set plastics, paper or other items that could melt or
burn near the oven vent.
Precision Cooking TM System - Precise Bake
The Precise Bake system electronically regulates the oven heat
levels during preheat and bake to maintain a precise temperature
range for optimal cooking results. The bake and broil elements or
burners cycle on and off in intervals. On convection range models,
the fan will run while preheating and may be cycled on and off for
short intervals during preheating to provide the best results. This
feature is automatically activated when the oven is in use.
Before baking and roasting, position racks according to
"Positioning Racks and Bakeware" section. When roasting, it is not
necessary to wait for the oven preheat cycle to end before putting
food in unless it is recommended in the recipe.
Leave the door open 6" (15 cm) at the broil stop position to ensure
proper broiling temperature. Preheat the oven for 5 minutes before
putting food in unless recommended otherwise in the recipe.
Position food on grid in a broiler pan, then place it in the center of
the oven rack.
/
/
I
I
NOTE: Odors and smoke are normal the first few times the oven is
used or if the oven is heavily soiled.
Preheating
When Start is pressed, the oven will begin preheating. Once 100°F
(38°C) is reached, the display temperature will increase as the
actual temperature of the oven increases. When the preheat
temperature is reached, a tone will sound, and the selected
temperature will appear on the display. The time necessary to
preheat the oven to 350°F (177°C) is approximately 10 to
15 minutes, depending on the model.
Power Preheat
Power Preheat can be used to shorten the preheating time. Only
one standard flat rack should be in the oven during Power Preheat.
Extra racks should be removed prior to starting Power Preheat.
Press POWER PREHEAT and follow the oven control prompts, or, if
preheating has already started, simply press POWER PREHEAT.
The preheating cycle should be completed before placing food in
the oven and should be used only for one-rack baking. When the
Power Preheat cycle is complete, the oven starts a normal Bake
cycle.
Changing the temperature when broiling allows more precise
control when cooking. The lower the broil setting, the slower the
cooking. Thicker cuts and unevenly shaped pieces of meat, fish
and poultry may cook better at lower broil settings. Use racks 6 or
7 for broiling. Refer to the "Positioning Racks and Bakeware"
section for more information.
On lower settings, the broil element will cycle on and off to maintain
the proper temperature.
• For best results, use a broiler pan and grid. It is designed to
drain juices and help avoid spatter and smoke.
Ifyou would like to purchase a broiler pan, one may be ordered.
Please refer to the "Accessories" section for more information.
In a convection oven, the fan-circulated hot air continually IMPORTANT: With convection cooking, most foods can be cooked
distributes heat more evenly than the natural movement of air in a at a lower temperature or at a shorter time. This range
standard thermal oven. This movement of hot air helps maintain a automatically reduces the set oven temperature by 25°F (15°C) for
consistent temperature throughout the oven, cooking foods more convection cooking.
evenly, crisping surfaces while sealing in moisture and yielding
crustier breads.
11
Food Poisoning Hazard
Do not let food sit in oven more than one hour before
or after cooking.
Doing so can result in food poisoning or sickness.
To Set a Timed Cook:
1. Press BAKE, CONVECT BAKE or CONVECT ROAST.
2. Press the number keypads to enter a temperature other than
the one displayed.
3. Press COOK TIME. The cook time oven indicator light will light
up.
4. Press the number keypads to enter the length of time to cook.
5. Press START. The display will count down the time. When the
time ends, the oven will shut off automatically.
6. Press CANCEL to clear the display.
During convection cooking, the bake, broil and convection
elements cycle on and off in intervals to maintain the oven
temperature, while the fan circulates the hot air.
If the oven door is opened during convection cooking, the fan will
turn off immediately. It will come back on when the oven door is
closed.
NOTE: The oven door must be closed for convection broiling.
EvenAir TM True Convection
When convection baking, broiling or roasting enter your normal
baking temperature. The control will automatically reduce the set
oven temperature by 25°F (15°C).
Convect Options
Convect Bake - Multiple-rack baking or cookies, biscuits, breads,
casseroles, tarts, tortes, cakes.
Convect Broil - Thicker cuts or unevenly shaped pieces of meat,
fish or poultry.
Convect Roast - Whole chicken or turkey, vegetables, pork roasts,
beef roasts.
To Set a Delayed Timed Cook:
1. Press BAKE, CONVECT BAKE or CONVECT ROAST.
2. Press the number keypads to enter a temperature other than
the one displayed.
3. Press COOK TIME. The cook time oven indicator light will light
up.
4. Press number keypads to enter the length of time to cook.
5. Press DELAY START. The start time/delay oven indicator light
will light up.
6. Press number keypads to enter the number of hours and/or
minutes you want to delay the start time.
7. Press START.
When the start time is reached, the oven will automatically turn on.
The temperature and/or time settings can be changed anytime
after pressing Start by repeating steps 1-7. When the set cook time
ends, the oven will shut off automatically.
8. Press CANCEL to clear the display.
Food Poisoning Hazard
Do not let food sit for more than one hour before or
after cooking.
Doing so can result in food poisoning or sickness.
The Warming Drawer is ideal for keeping hot cooked foods at
serving temperature. It may also be used for warming breads and
pastries.
Different types of food may be placed in the warming drawer at the
same time. For best results, do not hold foods longer than 1 hour.
For smaller quantities, pizza, or heat-sensitive foods, such as eggs,
do not hold longer than 30 minutes.
Food must be at serving temperature before being placed in the
warming drawer. Breads, pastries, and fruit pies may be heated
from room temperature.
12
Remove food from plastic bags and place in oven-safe container.
Cover foods with a lid or aluminum foil.
Do not cover with plastic wrap.
Empty serving dishes and ovenproof dishes can be heated while
the warming drawer is preheating. Check the dish manufacturer's
recommendations before warming the cookware.
Before using the warming drawer, wash the bottom of the drawer
with soap and water. See "General Cleaning" section.
To Use:
1. Press WARMING DRAWER.
2. Press START.
3. Allow the warming drawer to preheat for 15 minutes.
4. Place cooked food(s) in warming drawer.
5. Press WARMING DRAWER when finished.
The Warming Drawer operates at a temperature of approximately
160°F (71°C).