Maytag W10300218B User Manual
INSTALLATION INSTRUCTIONS
DRAWER DISHWASHER
INSTRUCCIONES DE INSTALACIÓN
DE LA LAVAVAJILLAS DE CAJÓN
INSTRUCTIONS D’INSTALLATION
LAVE-VAISSELLE À TIROIR(S)
Table of Contents/Índice/Table des matières..................................................................2
IMPORTANT:
Save for local electrical inspector's use.
Installer: Leave installation instructions with the homeowner.
Homeowner: Keep installation instructions for future reference.
IMPORTANTE:
Guarde para tenerlas a disposición del inspector de electricidad local.
Instalador: Deje las instrucciones de instalación con el propietario.
Propietario: Conserve las instrucciones de instalación para referencia futura.
IMPORTANT :
Conserver pour consultation par l'inspecteur local des installations électriques.
Installateur : Remettre les instructions d'installation au propriétaire.
Propriétaire : Conserver les instructions d'installation pour référence ultérieure.
W10300218B
TABLE OF CONTENTS
DISHWASHER SAFETY...............................................................................3
INSTALLATION REQUIREMENTS ............................................................. 4
Tools and Parts......................................................................................... 4
Location Requirements.............................................................................5
Water Supply Requirements..................................................................... 5
Electrical Requirements............................................................................6
Drain Requirements ..................................................................................6
INSTALLATION INSTRUCTIONS ...............................................................7
Unpack Dish Drawer.................................................................................7
ÍNDICE
SEGURIDAD DE LA LAVAVAJILLAS .......................................................18
REQUISITOS DE INSTALACIÓN ..............................................................19
Piezas y herramientas.............................................................................19
Requisitos de ubicación .........................................................................20
Requisitos del suministro de agua .........................................................20
Requisitos eléctricos...............................................................................21
Requisitos de desagüe ...........................................................................21
INSTRUCCIONES DE INSTALACIÓN ......................................................22
Desempaque el cajón para platos..........................................................22
Prepare la abertura del armario ..............................................................22
TABLE DES MATIÈRES
SÉCURITÉ DU LAVE-VAISSELLE............................................................33
EXIGENCES D’INSTALLATION................................................................34
Outillage et composants.........................................................................34
Exigences d’emplacement .....................................................................35
Spécifications de l’alimentation en eau..................................................35
Spécifications électriques.......................................................................36
Évacuation de l’eau de lavage—Critères à respecter............................36
INSTRUCTIONS D’INSTALLATION ......................................................... 37
Déballage du lave-vaisselle ....................................................................37
Aménagement de la cavité d’encastrement du placard ........................37
Prepare Cabinet Opening......................................................................... 7
Prepare Dishwasher .................................................................................8
Route Electrical Wiring ............................................................................. 9
Route Water Supply Line and Drain Hose .............................................10
Connect Water Supply Line and Drain Hoses ....................................... 11
Make Electrical Connection.................................................................... 12
Install Trim Pieces and Level Dishwasher..............................................13
Secure Dishwasher................................................................................. 15
Complete Installation..............................................................................15
Prepare la lavavajillas .............................................................................23
Dirija el cableado eléctrico .....................................................................24
Cómo dirigir la línea de suministro de agua y la manguera
de desagüe ............................................................................................. 25
Conecte la línea de suministro de agua y las mangueras
de desagüe ............................................................................................. 26
Conexión del suministro eléctrico ..........................................................28
Instale las piezas de adorno y nivele la lavavajillas................................ 29
Asegure la lavavajillas.............................................................................30
Complete la instalación .......................................................................... 31
Préparation du lave-vaisselle ................................................................. 38
Installation du câblage électrique........................................................... 39
Acheminement du conduit d'alimentation en eau et
du tuyau de vidange ............................................................................... 40
Raccordement du conduit d'alimentation en eau et
des tuyaux de vidange ........................................................................... 41
Raccordement du circuit électrique ....................................................... 43
Installation des pièces de garniture; établissement
de l’aplomb du lave-vaisselle .................................................................44
Arrimage du lave-vaisselle...................................................................... 45
Achever l’installation...............................................................................46
2
DISHWASHER SAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
You can be killed or seriously injured if you don't immediately
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using the dishwasher, follow basic precautions, including the following:
follow instructions.
can be killed or seriously injured if you don't
You
instructions.
follow
■ Read all instructions before using the dishwasher.
■ Use the dishwasher only for its intended function.
■ Use only detergents or rinse agents recommended for use
in a dishwasher, and keep them out of the reach of children.
■ When loading items to be washed:
1) Locate sharp items so that they are not likely to damage
the door seal; and
2) Load sharp knives with the handles up to reduce the risk
of cut-type injuries.
■ Do not wash plastic items unless they are marked
“dishwasher safe” or the equivalent. For plastic items not so
marked, check the manufacturer's recommendations.
■ Do not touch the heating element during or immediately
after use.
■ Do not operate the dishwasher unless all enclosure panels
are properly in place.
SAVE THESE INSTRUCTIONS
Do not open dishwasher drawer until dishwasher is inside the cabinet opening.
If the dishwasher is not in the cabinet opening, slowly open the drawer while someone grasps
the rear of the dishwasher.
Failure to follow these instructions can result in death or serious injury.
■ Do not tamper with controls.
■ Do not abuse, sit on, or stand on the door, lid, or dish racks
of the dishwasher.
■ To reduce the risk of injury, do not allow children to play in
or on the dishwasher.
■ Under certain conditions, hydrogen gas may be produced in
a hot water system that has not been used for two weeks or
more. HYDROGEN GAS IS EXPLOSIVE. If the hot water
system has not been used for such a period, before using
the dishwasher turn on all hot water faucets and let the
water flow from each for several minutes. This will release
any accumulated hydrogen gas. As the gas is flammable,
do not smoke or use an open flame during this time.
■ Remove the door or lid to the washing compartment
when removing an old dishwasher from service or
discarding it.
WARNING
Tip Over Hazard
You need to:
■ Slowly open dishwasher drawer while someone grasps the
rear of the dishwasher. Remove shipping materials. Close
dishwasher drawer. Latch the dishwasher drawer shut.
■ Observe all governing codes and ordinances.
■ Install this dishwasher as specified in these instructions.
3
■ Have everything you need to properly install dishwasher.
■ Contact a qualified installer to ensure that dishwasher is
installed to meet all electrical and plumbing national and local
codes and ordinances.
INSTALLATION REQUIREMENTS
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
■ Pliers
■ Phillips screwdriver
■ Flat-blade screwdriver
■ ³⁄₁₆" and ¼" nut drivers or
hex sockets
■ Measuring tape or ruler
■ 1½" hole saw bit
■ 10" adjustable wrench
■ Utility knife
■ Level
■ Cordless drill
■ ¹⁄₈" drill bit
■ Security T-20 TORX
®†
driver (on some models)
Parts Supplied
Check that all parts are included.
A
E
B
C
D
F
Parts Needed
A
A. 72" (182.9 cm) flexible water supply line
B. Zip tie
C. Appropriate sized UL Listed wire connectors (2)
I
G
B
H
C
K
J
L
M
N
A.
³⁄₄
" UL Listed/CSA Approved
strain relief
B. 1.25" hose clamp
C. Mounting bracket screws (8)
D. Unit mounting screws (4)
E. Drain hose connector
F. Mounting brackets (4)
G. Drain connector spring
clamps (2)
H. Trim strips (2)
I. Toe kick brackets (2)
J. Toe kick bracket screws (2)
K. Toe kick trim
L. Panel fasteners (on some
models) (2)
®†
M. TORX
N. Drain hose
screws (on some
models) (10)
†®TORX is a registered trademark of Acument Intellectual Properties, LLC
4
Location Requirements
IMPORTANT: Observe all governing codes and ordinances.
Failure to meet codes and ordinances could lead to fire or
electrical shock.
Proper installation is your responsibility.
■ Contact a qualified installer to ensure that the dishwasher is
installed to meet all electrical and plumbing national and local
codes and ordinances.
■ Install the dishwasher as specified in these instructions.
■ Have everything you need to properly install dishwasher.
■ Avoid damage from freezing to dishwasher and water lines
leading to dishwasher. Damage from freezing is not covered
by the warranty.
■ This dishwasher is manufactured for indoor use only.
■ Install and level dishwasher on a floor that will hold the weight,
and in an area suitable for its size and use.
Product Dimensions
24"
(61 cm)
23³⁄₈"
(59.5 cm)
Installation Clearances
Cutout Dimensions
Preferred Utility Area
(61 cm)
24"
24"
(61 cm)
33⁷⁄₈"
(86 cm)
A
¹⁄₄"
19
(48.9 cm)
¹⁄₂"
1
(3.75 cm)
33³⁄₄"
(85.7 cm)
¹⁄₂"
(1.3 cm)
25"
(63.5 cm)
B
8"
(20.3 cm)
A. Left-hand or right-hand water connection route
B. Left-hand or right-hand electric connection and drain route
NOTE: All holes should be drilled at 1½" (3.8 cm) diameter.
Water Supply Requirements
■ A hot water line with 20 to 120 psi (138 to 862 kPa) water
pressure.
■ 120°F (49°C) water temperature at dishwasher.
■ Flexible stainless steel braided fill line (½" minimum plastic
tubing is not recommended).
5
Electrical Requirements
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
GROUNDING INSTRUCTIONS
■
For a grounded, cord-connected dishwasher:
The dishwasher must be grounded. In the event of a
malfunction or breakdown, grounding will reduce the
risk of electric shock by providing a path of least
resistance for electric current. The dishwasher is
equipped with a cord having an equipment-grounding
conductor and a grounding plug. The plug must be
plugged into an appropriate outlet that is installed and
grounded in accordance with all local codes and
ordinances.
WARNING: Improper connection of the
equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or
service representative if you are in doubt whether the
dishwasher is properly grounded. Do not modify the
plug provided with the dishwasher; if it will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
■
For a permanently connected dishwasher:
The dishwasher must be connected to a grounded
metal, permanent wiring system, or an equipmentgrounding conductor must be run with the circuit
conductors and connected to the equipmentgrounding terminal or lead on the dishwasher.
You must have:
■ 120-volt, 60 Hz, AC-only, 15 or 20 amp fused electrical supply.
■ Copper wire only.
We recommend:
■ A time-delay fuse or circuit breaker.
■ A separate circuit.
If direct wiring dishwasher:
■ Use flexible, armored or nonmetallic sheathed, copper wire
with grounding wire that meets the wiring requirements for
your home and local codes and ordinances.
■ Use strain relief method provided with house wiring junction
box or install a UL Listed/CSA Approved clamp connector to
the house wiring junction box. If using conduit, use a
UL Listed/CSA Approved conduit connector.
If connecting dishwasher with a power supply cord:
■ Use Power Supply Cord Kit (Part Number 4317824) marked
for use with dishwashers. Kit contents include:
■ Voltex, Inc., UL Listed 16-gauge 3 wire power supply cord
with 3 prong grounded plug.
■ Neer C-500 ⁷⁄₈" strain relief.
■ 3 wire connectors.
■ Part Number 302797 grommet.
Follow the kit instructions for installing the power supply cord.
■ Power supply cord must plug into a mating three prong,
grounded outlet, located in the cabinet next to the dishwasher
opening. Outlet must meet all local codes and ordinances.
IMPORTANT: If you plan to install a garbage disposer, an
additional separate 120-volt, 60 Hz, AC-only, 15 or 20 amp fused
electrical supply is required.
Drain Requirements
■ Use the new drain hose supplied with your dishwasher. If this
is not long enough, use a new drain hose with maximum
length of 12 ft (3.7 m) that meets all current AHAM/IAPMO test
standards, is resistant to heat and detergent, and fits the
1" (2.5 cm) drain connector of the dishwasher.
■ Connect drain hose to waste tee or disposer inlet above drain
trap in house plumbing and 20" (50.8 cm) minimum above the
floor. It is recommended that the drain hose either be looped
up and securely fastened to the underside of the counter, or
be connected to an air gap.
Drain Air Gap
SAVE THESE INSTRUCTIONS
Contact a qualified electrician.
Ensure that the electrical installation is adequate and in
conformance with all national and local codes and ordinances.
6
■ Use a drain air gap if the drain hose is connected to house
plumbing lower than 20" (50.8 cm) above the subfloor or floor.
■ Use ½" (1.3 cm) minimum I.D. drain line fittings.
INSTALLATION INSTRUCTIONS
WARNING
2. Drill 1½" (3.8 cm) diameter holes for drain and water hoses
and electrical wiring as shown. Holes should be placed
½" (1.3 cm) from back wall.
A
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
2. Turn off water supply.
Unpack Dish Drawer
WARNING
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
1. Read valuable information on exterior of shipping box before
opening.
2. Remove shipping materials, tape and film from the
dishwasher. Remove parts package from inside the
dishwasher.
¹⁄₂"
(1.3 cm)
25"
(63.5 cm)
B
8"
(20.3 cm)
A. Choose left-hand or right-hand water hose route.
B. Choose left-hand or right-hand electric wire and drain route.
Wood cabinet: Sand the hole until smooth.
Metal cabinet: Cover hole with grommet (Part Number 302797,
provided with cord kit).
3. Install mounting brackets 17" (43.2 cm) from floor using
screws provided. If needed, drill ¹⁄₈" pilot holes in cabinet.
Prepare Cabinet Opening
1. To ensure minimum clearance dimensions exist:
■ Measure the distance from the cabinet countertop to the
floor and ensure 33³⁄₄" (85.7 cm) minimum height.
■ Measure the distance from the front of the cabinet to the
back wall and ensure 24" (61 cm) minimum depth.
■ Measure the distance from the left-hand side to the right-
hand side of opening and ensure 24" (61 cm) minimum
width.
17"
(43.2 cm)
4. Decide which dishwasher-to-counter attachment method will
be used.
7
Option 1: Solid surface countertop installation
ST
A
R
T
S
T
A
T
■ Install second set of mounting brackets 33½" (85 cm) from
floor. If needed, drill ¹⁄₈" pilot holes in cabinet.
Prepare Dishwasher
WARNING
33¹⁄₂"
(85 cm)
Option 2: Wood countertop installation
■ Prepare dishwasher by folding over tabs located on the
top front as shown.
Tip Over Hazard
Do not open dishwasher drawer until dishwasher is
inside the cabinet opening.
If the dishwasher is not in the cabinet opening, slowly
open the drawer while someone grasps the rear of the
dishwasher.
Failure to follow these instructions can result in death
or serious injury.
WARNING
Excessive Weight Hazard
Use two or more people to move and install
dishwasher.
Failure to do so can result in back or other injury.
1. Measure cabinet opening height from floor to bottom of
countertop.
H
8
2. Using two or more people, place corner packaging on the
floor and place dishwasher on its back.
3. Adjust leveling legs based on the cabinet opening
measurement and the chart below.
X
Option 1: Right-Hand Side Utility Route
H : X H : X
33
⁷⁄₈
" (86 cm) : 0" 34
34" (86.3 cm) :
¹⁄₈
" (86.7 cm) :¼" (0.6 cm) 34
34
34
¹⁄₄
" (87 cm) :
34
³⁄₈
" (87.3 cm) :½" (1.3 cm) 35" (88.9 cm) :1
¹⁄₈
" (0.3 cm) 34
³⁄₈
" (1 cm) 34
¹⁄₂
" (87.6 cm) :
⁵⁄₈
" (87.9 cm) :
³⁄₄
" (88.3 cm) :
⁷⁄₈
" (88.6 cm) :1" (2.5 cm)
⁵⁄₈
³⁄₄
⁷⁄₈
¹⁄₈
4. Place dishwasher in upright position.
Route Electrical Wiring
WARNING
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
" (1.6 cm)
" (1.9 cm)
" (2.2 cm)
" (2.9 cm)
Route wire through 1½" (3.81 cm) hole located
8" (20.32 cm) above the floor.
After routing the electrical wire through the right-hand hole, attach
the wire to back left-hand side of cabinet wall 8" (20.32 cm) above
the floor. Then continue routing the wire along the left-hand side of
cabinet opening to the front of the opening.
Option 2: Left-Hand Side Utility Route
Follow all national and local codes and ordinances for completing
electrical supply to cabinet.
Route wire through 1½" (3.81 cm) hole located 8"
(20.32 cm) above the floor.
After routing the electrical wire through the left-hand hole,
continue routing the wire along the left-hand side of cabinet to the
front of the opening.
9
Route Water Supply Line and Drain Hose
1. Connect water supply line to water valve on dishwasher.
2. Slide clamp onto drain hose, and then push hose into “Y”
connector until fully seated. Several clicks will be heard.
Option 1: Right-Hand Side Utility Access
■ For right-hand routing, place the water supply line in the
clips.
3. Slide clamp into position over the “Y” connector.
■ Route drain hose on clips on bottom/back of unit.
Option 2: Left-Hand Side Utility Access
■ For left-hand routing, place hose in clip on bottom right-
hand side of the dishwasher.
10
■ Route water supply line and drain hoses into the cabinet.
A
4. Slide clamp into position (figures C and D).
■ Slide dishwasher partway into the cabinet opening. Allow
for access to the electrical terminal box.
A
C
B
D
5. Connect the drain hose using one of the following options:
Option 1: Waste Disposer No Drain Air Gap
A
C
Connect Water Supply Line and Drain Hoses
1. Connect water supply line to the water valve under the sink.
A. Hot water supply
2. Slide clamps onto drain hoses (Figure A). Do not cut drain
hoses.
3. Push hose into drain connector until fully seated (Figure B).
Several “clicks” will be heard.
B
A. For new construction, remove disposer plug.
B. Connect drain connector to waste disposer.
C. Tighten clamp.
NOTE: This connection must be before the drain trap and at least
20" (50.8 cm) above the floor where the dishwasher will be
installed. It is recommended that the drain hose be looped up and
securely fastened to the underside of the counter.
Option 2: No Waste Disposer and Drain Air Gap
A
C
B
A. Drain air gap
B. Drain hose connector
C. Waste
11
Option 3: Waste Disposer and Drain Air Gap
C
A
B
A. Drain air gap
B. Drain hose connector
C. Waste
Option 4: No Waste Disposer, No Drain Air Gap
A
Make Electrical Connection
WARNING
Electrical Shock Hazard
Disconnect electrical power at the fuse box or circuit
breaker box before installing dishwasher.
Failure to do so can result in death or electrical shock.
1. Remove screw securing the electrical box cover. Remove
cover.
B
A. Drain hose connector
B. Waste
NOTES:
■ Attach the drain hose connector to the water waste line
using the supplied hose clamp.
■ This connection must be before the drain trap and at least
20" (50.8 cm) above the floor where the dishwasher will be
installed. It is recommended that the drain hose be looped
up and securely fastened to the underside of the counter.
6. Turn on water and check for leaks.
2. Route electrical wires through strain relief and secure to
electrical plate.
12
WARNING
Electrical Shock Hazard
Electrically ground dishwasher.
Connect ground wire to green ground connector in
terminal box.
Do not use an extension cord.
Failure to follow these instructions can result in death,
fire, or electrical shock.
3. Connect wires as follows using twist-on connectors sized to
connect direct wire to 16-gauge dishwasher wire.
Power supply wire: Terminal box wire:
white white
black black
ground wire ground connector
4. Attach ground wire to the green ground screw.
5. Reinstall electric box cover with all wires contained inside the
terminal box.
NOTE: Do not plug into outlet until instructed to do so.
Install Trim Pieces and Level Dishwasher
1. Open bottom drawer.
2. Push in clips and slide rails back 5" (12.7 cm).
A
B
A. Attach ground wire to green screw.
B. Attach white and black wires.
3. Lift drawer off slide rails. Place drawer off to the left on
covering. Slide rails into dishwasher.
1
1
2
2
13
4. Slide the dishwasher into position in the cabinet opening.
Check that the drain hose and electrical wiring are not kinked.
5. Check left to right level by placing the level on the top of the
drawer. Check front to back level by placing level on the slide
rails.
6. Adjust legs with a ³⁄₁₆" socket wrench to level the dishwasher.
8. Attach the toe kick bracket to the frame.
9. Place the trim strip into the toe kick bracket.
A
A. Adjust legs.
7. Rest the trim strip on the floor and mark the trim at the top of
the frame flange height. Pick the closest groove to the mark. If
the mark is between 2 grooves, choose the groove that makes
the trim strip the shortest. On a covered surface, cut the trim
strip at the selected groove. Pull dishwasher back out of
cabinet opening about 6" (15.24 cm).
2
10. Attach the toe kick bracket on the opposite side.
14
1
3
1
11. Place the flexible side trim strips on both sides as shown.
1
1
2
3. Attach dishwasher to upper cabinet mounting brackets.
Option 1: Solid surface countertop
Attach dishwasher to the side cabinet mounting brackets
(installed earlier).
A
12. Slide the dishwasher back into position in the cabinet
opening. Check that the drain hose and electrical wiring are
not kinked.
Secure Dishwasher
1. Remove top drawer (same procedure as followed to remove
bottom drawer) and set drawer on bottom drawer separated
with corner packaging.
1
1
2. Attach dishwasher to the lower cabinet mounting bracket
(installed earlier).
2
2
A
A. Attach dishwasher to side cabinet mounting brackets.
Option 2: Wood countertop
Attach the dishwasher to the countertop using the folded over
mounting tabs located on the top of the dishwasher.
A
A. Attach dishwasher to countertop using folded over mounting tabs.
Complete Installation
1. Pull top drawer slide rails out and set top drawer on slide rails.
2
2
1
1
A. Attach dishwasher to lower cabinet mounting bracket.
15
Loading...