Maytag W10280549B- SP, W10280548C User Manual

TOP-LOADING

LAVEUSE À CHARGEMENT

WASHER

USE AND CARE GUIDE

Para una versión de estas instrucciones en español, visite www.maytag.com

Table of Contents

WASHER SAFETY ............................................................2

CONTROL PANEL AND FEATURES .................................3

CYCLE GUIDE .................................................................4

USING YOUR WASHER ..................................................5

WASHER MAINTENANCE ...............................................8

TROUBLESHOOTING ..................................................10

WARRANTY ..................................................................14

ASSISTANCE OR SERVICE ............................... Back Cover

PAR LE DESSUS

GUIDE D’UTILISATION ET

D’ENTRETIEN

Table des matières

SÉCURITÉ DE LA LAVEUSE ...........................................15

TABLEAU DE COMMANDE ET

CARACTÉRISTIQUES ....................................................16

GUIDE DE PROGRAMMES ...........................................18

UTILISATION DE LA LAVEUSE .....................................19

ENTRETIEN DE LA LAVEUSE .........................................22

DÉPANNAGE ................................................................24

GARANTIE ....................................................................30

ASSISTANCE OU SERVICE ...................Couverture arrière

W10280548C W10280549B - SP

WASHER SAFETY

CONTROL PANEL AND FEATURES

Not all features and options are available on all models.

WATER LEVEL

Select the setting most suitable for your load. Small will add a low amount of water for smaller loads and Super Plus will add the most amount of water for large or bulky loads. Items need to move freely. Tightly packing can lead to poor cleaning performance, and may increase wrinkling and tangling.

TEMPERATURE

Temperature Control senses and maintains uniform water temperatures by regulating incoming hot and cold water.

Select a wash temperature based on the type of fabric and soils being washed. For best results and following the garment label instructions, use the warmest wash water safe for your fabric.

• Warm and hot water will be cooler than what your previous washer provided.

•Even in a cold and cool water wash, some warm water may be added to the washer to maintain a minimum temperature.

Appearance may vary.

CYCLE STATUS LIGHTS

The Cycle Status Lights show the progress of a cycle. At each stage of the process, you may notice sounds or pauses that are different from traditional washers.

FILL

When the START/Pause/Unlock button is pressed, the

washer will rst perform a self-test on the lid lock mechanism. You will hear a click, and the lid will unlock briey before locking again. The washer will use spins to check for load balance. These spins may take several minutes before water is added to the washer. You may hear the hum of the spins before lling. This is normal.

WASH CYCLE KNOB

Use the Wash Cycle knob to select available cycles on your washer. Turn the knob to select a cycle for your laundry load. See “Cycle Guide” for detailed descriptions of cycles.

FABRIC SOFTENER

This option can be added to most cycles and must be set to “YES” if using fabric softener during a cycle. It ensures that fabric softener is added at the correct time in the rinse for even distribution.

START/PAUSE/UNLOCK BUTTON

Press to start the selected cycle; press again to pause the cycle and unlock the lid.

NOTE: If the washer is spinning, it may take several minutes to unlock the lid. Press and hold for 3 seconds to cancel a cycle.

WASH

You will hear the agitator moving the load. The motor

sounds may change at different stages in the cycle. The wash time is determined by the selected soil level.

RINSE

You will hear sounds similar to the wash cycle as the washer rinses and moves the load. You may hear the motor turning on briey (short hum) to move the basket while lling. Fabric softener will be added if the Fabric Softener-Yes option was selected.

Some cycles use spray rinsing. After draining and spinning out wash water, the washer will continue to spin and spray in rinse water for the entire rinse time.

SPIN

The washer spins the load at increasing speeds for proper water removal, based on the selected cycle and spin speed.

DONE

Once the cycle is complete, this light will come on. Remove the load promptly for best results.

CYCLE GUIDE

For best fabric care, choose the cycle that best ts the load being washed. Not all cycles and options are available on all models.

LID LOCKED

To allow for proper spin operation, the lid will lock and the Lid Lock light will turn on. This light indicates that the lid is locked and cannot be opened.

If you need to open the lid, press START/Pause/Unlock. The lid will unlock once the washer movement has stopped. This may take several minutes if the load was spinning at high speed. Press START/Pause/ Unlock again to resume the cycle.

Items to wash:

Heavily soiled fabrics

Sturdy fabrics, colorfast items, towels, jeans

Large items such as sheets, small comforters, jackets

Cottons, linens, sheets, and mixed garment loads

Lightweight cotton fabrics

No-iron fabrics, cottons, perm press, linens, synthetics

Machine-wash silks, lingerie, washable wools

Cycle:

Heavy Duty

Heavy

Heavy Duty

Regular

Normal

Heavy

Normal Regular

Normal

Light

Casual

Delicate Low

Temperature*:

Hot

Warm

Cool Cold

Hot

Warm

Cool Cold

Hot

Warm

Cool Cold

Hot

Warm

Cool Cold

Hot

Warm

Cool Cold

Hot

Warm

Cool Cold

Hot

Warm

Cool Cold

Spin

Speed:

High

Low

Cycle Details:

Use this cycle for heavily soiled or sturdy items. This cycle uses spray rinses only.

Use this cycle for normally soiled or sturdy items. This cycle uses spray rinses only.

Use this cycle for heavily soiled cottons or mixed fabric loads. This cycle uses spray rinses only.

Use this cycle for normally soiled cottons and mixed fabric loads. This cycle uses spray rinses only.

Use this cycle for lightly soiled mixed loads. This cycle uses spray rinses only.

Use this cycle to wash loads of no-iron fabrics such as sport shirts, blouses, casual business clothes, permanent press, and blends.

Use this cycle to wash lightly soiled garments indicating “Machine Washable Silks” or “Gentle” cycle on the care label. Place small items in mesh garment bags before washing.

Swimsuits and items requiring rinsing without detergent

Dripping wet or hand-washed items

NOTE: Be sure to select Fabric Softener-Yes, if adding fabric softener to load. *All rinses are cold.

Rinse &

Spin

Drain &

Spin

Cold rinse only

N/A

High

Combines a rinse and high speed spin for loads requiring an additional rinse cycle or to complete a load after power interruption. Also use for loads that require rinsing only.

This cycle uses a spin to shorten drying times for heavy fabrics or special-care items washed by hand. Use this cycle to drain washer after cancelling a cycle or completing a cycle after a power failure.

USING YOUR WASHER

1. Sort and prepare your laundry

•Emptypockets.Loosechange,buttons,oranysmallobject can pass under the agitator and become trapped, causing unexpected sounds.

•Sortitemsbyrecommendedcycle,watertemperature, and colorfastness.

•Separateheavilysoileditemsfromlightlysoiled.

•Separatedelicateitemsfromsturdyfabrics.

•Donotdrygarmentsifstainsremainafterwashing,because

heat can set stains into fabric.

•Treatstainspromptly.

•Closezippers,fastenhooks,tiestringsandsashes,andremove

non-washable trim and ornaments.

•Mendripsandtearstoavoidfurtherdamagetoitemsduring

washing.

Helpful Tips:

•Whenwashingwater-prooforwater-resistantitems,loadevenly.

•Usemeshgarmentbagstohelpavoidtanglingwhenwashing

delicate or small items.

•Turnknitsinsideouttoavoidpilling.Separatelint-takersfrom

lint-givers. Synthetics, knits, and corduroy fabrics will pick up lint from towels, rugs, and chenille fabrics.

NOTE: Always read and follow fabric care label instructions to avoid damage to your garments.

2. Add detergent

Add a measured amount of detergent into the bottom of the washer basket before adding clothes. If using an Oxi or color-safe bleach laundry boost product, add to the bottom of the washer basket, as well.

IMPORTANT: Follow the manufacturer’s instructions to determine the amount of detergent to use.

Liquid

Chlorine Bleach

3. Load laundry into washer

MAX FILL

Load garments in loose heaps evenly around basket wall. For best results, do not pack the load tightly. Do not wrap large items such as sheets around the agitator; load them in loose pilesaroundthesidesofthebasket.Trymixingdifferentsized items to reduce tangling.

IMPORTANT: Do not tightly pack or force items into washer. Items need to move freely for best cleaning and to reduce wrinkling and tangling.

5. Add fabric softener to dispenser

(on some models)

Pour a measured amount of liquid fabric softener into dispenser; always follow manufacturer’s directions for correct amount

offabricsoftenerbasedonyourloadsize.

Dilute liquid fabric softener by lling the dispenser with warm water until liquid reaches the underside of the rim. See max ll line arrows. Then select Fabric Softener-Yes option.

IMPORTANT: Fabric Softener option must be selected to “Yes” to ensure proper distribution at correct time in cycle.

Adding Liquid Fabric Softener Manually to Wash Load

During the nal rinse, wait until the washer has completed lling, press the START/Pause/Unlock button to pause the washer. Lift the lid and add the measured recommended amount of liquid fabric softener. Do not allow liquid fabric softener to spill, splash, drip, or run into the basket or on load. Do not use more than the recommended amount. Close the lid and press the START/Pause/ Unlock button again to start the washer.

IMPORTANT: Fabric Softener option must be selected to “Yes” to ensure proper distribution of the fabric softener during the rinse portion of the cycle.

4. Add liquid chlorine bleach

to dispenser

Do not overll, dilute, or use more than 1 cup (250 mL). Do not use color-safe bleach or Oxi products in the same cycle with liquid chlorine bleach.

6. Select cycle

Turn cycle knob to choose your wash cycle. For more information, see “Cycle Guide”.

7. Select WATER LEVEL

9. Select OPTION (on some models)

Select the Water Level setting most suitable for your load. Small will add a low amount of water for smaller loads and Super Plus will add the most amount of water for large or bulky loads. Items need to move freely.

8. Select TEMPERATURE

Once you select a cycle, select the desired wash temperature by turning the Temperature knob to the appropriate setting based on your load. All rinses are cold.

NOTE: Always read and follow fabric care label instructions to avoid damage to your garments.

Wash Temp

Hot

Some cold water is added to save energy. This will be cooler than your hot water heater setting.

Warm

Some cold water will be added, so this will be cooler than what your previous washer provided.

Suggested Fabrics

Whites and pastels Durable garments Heavy soils

Bright colors Moderate to light soils

If you are using fabric softener, be sure to set Fabric Softener-Yes option.

10. Press START/Pause/Unlock

to begin wash cycle

Press the START/Pause/Unlock button to start the wash cycle. Filling is delayed for several minutes while load balance is sensed. When the cycle has nished, the DONE indicator will light. Promptly remove garments after cycle has completed to avoid odor, reduce wrinkling, and rusting of metal hooks,

zippers,andsnaps.

Unlocking the lid to add garments

If you need to open the lid to add 1 or 2 missed garments: Press START/Pause/Unlock; the lid will unlock once the washer

movement has stopped. This may take several minutes if the load was spinning at high speed. Then close lid and press START/ Pause/Unlock again to restart the cycle.

If lid is left open for more than 10 minutes, the water will pump out automatically.

Delay in water ll

Filling is delayed for 2 to 3 minutes to check for load unbalance. You will hear the hum of the spin prior to lling. This is normal operation.

Cool

Warm water may be added to assist in soil removal and to help dissolve detergents.

Cold

This is the temperature from your faucet. If your tap cold water is very cold, warm water may be added to assist in soil removal and help dissolve detergent.

Colors that bleed or fade

Light soils

Dark colors that bleed or fade

Light soils

WASHER MAINTENANCE

WATER INLET HOSES

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.

CLEANING YOUR WASHER

Keep your washer as clean and fresh as your clothes. To keep washer interior odor-free, follow this recommended monthly cleaning procedure:

1. Make sure the washer is empty.

2. Using recommended AFFRESH® washer cleaner, add one

tablet to washer basket

If using liquid chlorine bleach, add 1 cup (250 mL) to liquid chlorine bleach dispenser.

NON-USE AND VACATION CARE

Operate your washer only when you are home. If moving, or not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer.

2. Turn off water supply to washer, to avoid ooding due to

water pressure surge.

WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

whereitwillnotfreeze.Becausesomewatermaystayin hoses,freezingcandamagewasher.Ifstoringormoving duringfreezingweather,winterizeyourwasher.

To winterize washer:

1. Shut off both water faucets; disconnect and drain water inlet

hoses.

2. Put1qt.(1L)ofR.V.-typeantifreezeinbasketandrun

washer on RINSE & SPIN cycle for about 30 seconds to

mixantifreezeandremainingwater.

3. Unplug washer or disconnect power.

IMPORTANT: Do not add detergent. Do not use more than

recommended amount of bleach to avoid damaging product over time.

3. Close washer lid.

4. Select Heavy Duty Regular cycle, hot Temperature, and large

Water Level.

5. Press START/Pause/Unlock. Water will pour into washer for a

moment and pause, lid will lock, then cycle will continue.

NOTE: For best results, do not interrupt cycle. If cycle must be interrupted, press START/Pause/Unlock twice and run a RINSE & SPIN cycle to ensure bleach has been rinsed from washer. Press and hold the START/Pause/Unlock for 3 seconds to cancel the cycle.

Cleaning the liquid fabric softener dispenser

1. Remove dispenser by grasping top with both hands and

squeezing,whilepushingupwardwiththumbs.

2. Rinse dispenser under warm water, then replace it. NOTE: To avoid damage to the washer or clothing, do not wash

clothes with the liquid fabric softener dispenser removed.

Cleaning the bleach dispenser

Wipe the inside of the bleach dispenser with a clean, damp cloth.

To clean exterior:

1. Use a soft, damp cloth or sponge to wipe up any spills.

2. Use all-purpose surface cleaner, if needed. IMPORTANT: To avoid damaging the washer’s nish, do not use

abrasive products.

TRANSPORTING YOUR WASHER

REINSTALLING/USING WASHER AGAIN

1. Shut off both water faucets. Disconnect and drain water inlet

hoses.

2. Ifwasherwillbemovedduringfreezingweather,follow

Winter Storage Care directions before moving.

3. Disconnect drain from drain system and drain any remaining

water into a pan or bucket. Disconnect drain hose from back of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside washer basket.

6. Drape power cord over edge and into washer basket.

7. Place packing tray from original shipping materials back

inside washer. If you do not have packing tray, place heavy blankets or towels into basket opening. Close lid and place tape over lid and down front of washer. Keep lid taped until washer is placed in new location.

To reinstall washer after non-use, vacation, winter storage, or moving:

1. Refer to “Installation Instructions” to locate, level, and

connect washer.

2. Before using again, run washer through the following

recommended procedure:

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses.

Turn on both water faucets.

2. Plug in washer or reconnect power.

3. Run washer through Casual cycle to clean washer and

removeantifreeze,ifused.Usehalfthemanufacturer’s recommendedamountofdetergentforamedium-sizeload.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

to possibly avoid the cost of a service call...In U.S.A. http://www.maytag.com/help - In Canada www.maytag.ca

If you experience

Vibration or Off-Balance

Check the following for proper installation or see “Using Your Washer” section

Noises

Clicking or metallic noises

Gurgling or humming

Humming

Water Leaks

Check the following for proper installation:

Washer not performing as expected

Washer won’t run or ll, washer stops working or wash light remains on (indicating that the washer was unable to ll appropriately)

Feet may not be in contact with the oor and locked.

Washer may not be level.

Load could be unbalanced.

Objects caught in washer drain system.

Washer may be draining water.

Fill light is on.

Washer not level.

Fill hoses not attached tightly. Fill hose washers. Drain hose connection.

Check household plumbing for leaks or clogged sink or drain.

Washer not loaded as recommended.

Check for proper water supply.

Possible Causes

Solution

Front and rear feet must be in rm contact with oor, and washer must be level to operate properly. Jam nuts must be tight against the bottom of the cabinet.

Check oor for exing or sagging. If ooring is uneven, a 3/4" (19 mm) piece of plywood under your washer will reduce sound.

See “Level the Washer” in Installation Instructions. Load dry items in loose heaps evenly around basket wall.

Adding wet items to washer or adding more water to basket could unbalance washer.

Wash smaller loads to reduce imbalance. Do not tightly pack. Avoid washing single items.

UseNormalRegularcycleandSuperPlusorLargeloadsizefor oversized,non-absorbentitemssuchascomfortersorpoly-lled

jackets. See “Cycle Guide” and “Using Your Washer” in this Use and

Care Guide.

Empty pockets before washing. Loose items such as coins could fall between basket and tub or may block pump. It may be necessary to call for service to remove items.

It is normal to hear metal items on clothing such as metal snaps,

buckles,orzipperstouchagainstthebasket.

It is normal to hear the pump making a continuous humming sound with periodic gurgling or surging as nal amounts of water are removed during the Drain & Spin cycles.

You may hear the hum of the sensing spins after you have started the washer. This is normal. Sensing spins will take several minutes before water is added to the washer.

Water may splash off basket if washer is not level. Check that load is not unbalanced or tightly packed.

Tighten ll-hose connection. Make sure all four ll hose at washers are properly seated. Pull drain hose from washer cabinet and properly secure it to

drainpipe or laundry tub. Do not place tape over drain opening.

Water can back up out of a clogged sink or drainpipe. Check all household plumbing for leaks (laundry tubs, drain pipe, water pipes, and faucets.)

Improper loading can cause basket to be out of alignment and cause water to splash off tub. See “Using Your Washer” for loading instructions.

Both hoses must be attached and have water owing to inlet valve.

Both hot and cold water faucets must be turned on. Check that inlet valve screens have not become clogged. Check for any kinks in inlet hoses, which can restrict water ow.

+ 22 hidden pages

Maytag W10280549B- SP, W10280548C User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual