Maytag UXW7230BSS Dimension Guide
PRODUCT MODEL NUMBERS
UXW7230BSS
Electrical: A 120 volt, 60 Hz., AC only, 15-amp, fused electrical
circuit is required.
30" (76.2 cm) Wall-Mount Canopy Range Hood
Calculating Vent System Length
To calculate the length of the system you need, add the equivalent feet
(meters) for each vent piece used in the system.
Vent System
Vent Piece 6" (15.2 cm) Round
45° elbow 2.5 ft
(0.8 m)
90° elbow 5.0 ft
(1.5 m)
Maximum equivalent vent length is 35 ft (10.7 m).
The following example falls within the maximum recommended vent
length of 35 ft (10.7 m).
1 - 90° elbow = 5.0 ft (1.5 m)
1 - wall cap = 0.0 ft (0.0 m)
8 ft (2.4 m) straight = 8.0 ft (2.4 m)
Length of system = 13.0 ft (3.9 m)
VENTING METHODS
For Non-Vented (recirculating) Installations
If it is not possible to vent cooking fumes and vapors to the outside,
the hood can be used in the non-vented (recirculating) version, by
fitting a charcoal filter and the deflector. Fumes and vapors are recycled
through the top grille. See the “Assistance or Service” section for
information on ordering.
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
PRODUCT DIMENSIONS
Ref. W10646401B
12/8/14
Page 1 of 2
Roof Venting Wall Venting Non-vented
(recirculating)
A
A
7¹⁄₄"
(18.4 cm)
8¹⁄₈"
(20.6 cm)
*28⁷⁄₈" (73.3 cm) min.
42¹⁄₁₆" (106.8 cm) max.
**28³⁄₈" (72.0 cm) min.
38" (96.5 cm) max.
14¹⁄₈"
(35.9 cm)
B
B
B
A
A. Roof cap
B. 6" (15.2 cm)
round vent
A. Wall cap
B. 6" (15.2 cm)
round vent
A. Deflector
B. 6" (15.2 cm)
round vent
30" (76.2 cm)
20" (50.8 cm)
*For non-vented (recirculating) installations
**For vented installations
10"
(25.4 cm)
1 " (3.8 cm)
Example vent system
90 elbow
2 ft
(0.6 m)
6 ft (1.8 m)
Wall cap
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10646401B
12/8/14
Page 2 of 2
CABINET DIMENSIONS
IMPORTANT:
Minimum distance “X”: 24" (61.0 cm) from electric cooking
surface.
Minimum distance “X”: 27" (68.6 cm) from gas cooking
surfaces.
Suggested maximum distance “X”: 36" (91.4 cm)
The chimneys can be adjusted for different ceiling heights. See the
following chart.
Vented Installations
Min. ceiling height Max. ceiling height
Electric cooking 7' 5" (2.26 m) 9' 2" (2.79 m)
surface
Gas cooking 7' 8" (2.34 m) 9' 2" (2.79 m)
surface
Non-vented (recirculating) Installations
Min. ceiling height Max. ceiling height
Electric cooking 7' 5" (2.26 m) 9' 6" (2.9 m)
surface
Gas cooking 7' 5" (2.26 m) 9' 6" (2.9 m)
surface
*NOTE: The range hood chimneys are adjustable and designed to meet
varying ceiling or soffit heights depending on the distance “X” between
the bottom of the range hood and the cooking surface. For higher
ceilings, a Stainless Steel Chimney Extension Kit Part Number
W10337357 is available from your dealer or an authorized parts
distributor. The chimney extension replaces the chimney shipped with the
range hood.
7¹⁄₄" (18.4 cm)
6⁵⁄₈" (16.8 cm)
7³⁄₈" (18.7 cm)
Side
cabinet
30" (76.2 cm)
“X”
bottom of
canopy
to cooking
surface
Centerline
*For non-vented (recirculating) installations
2" (5.1 cm) min.
6" (15.2 cm) min.*
Vent and power
supply cable
entry location
15" (38.1 cm)
Side
cabinet
Cooking surface
Loading...