Maytag URB551WNGZ Use & Care

REFRIGERATOR

USER INSTRUCTIONS

THANK YOU for purchasing this high-quality product. Register your new refrigerator at www.whirlpool.com. In Canada, call: 1-800-807-6777 or register your refrigerator at www.whirlpool.ca.

For future reference, please make a note of your product model and serial numbers. These can be located on the inside wall of the refrigerator compartment.

Model Number ___________________________________________ Serial Number____________________________________________

Table of Contents Índice Tables des Matières

REFRIGERATOR SAFETY �� 2

Proper Disposal of Your Old Refrigerator �� 3

INSTALLATION INSTRUCTIONS �� 3

Unpack the Refrigerator �� 3 Before Use �� 3 Location Requirements �� 4 Electrical Requirements �� 4 Reverse Door Swing�� 4 Install Door Handles �� 10

REFRIGERATOR USE �� 11

Using the Controls �� 11 Functions �� 11

REFRIGERATOR FEATURES �� 13

Refrigerator Shelves �� 14 Cooler Compartment �� 14 Fan �� 14 Freezer Compartment �� 14

REFRIGERATOR CARE �� 14

Cleaning �� 14 Defrosting �� 15 Lights �� 15 Vacation and Moving Care �� 15

TROUBLESHOOTING �� 16

Accessories �� 17

WARRANTY �� 18

SEGURIDAD DEL REFRIGERADOR �� 19

Cómo deshacerse adecuadamente de su refrigerador viejo �� 20

INSTRUCCIONES DE INSTALACIÓN �� 21

Desembale el refrigerador �� 21 Antes del uso �� 21 Requisitos de ubicación �� 22 Requisitos eléctricos �� 22 Cambio del sentido de apertura

de la puerta �� 23 Instalación de las manijas �� 29

USO DEL REFRIGERADOR �� 30

Uso de los controles �� 30 Funciones �� 30

CARACTERÍSTICAS DEL REFRIGERADOR �� 32

Estantes del refrigerador �� 33 Compartimento de conservadora �� 33 Ventilador �� 33 Compartimiento del congelador �� 33

CUIDADO DEL REFRIGERADOR �� 33

Limpieza �� 33 Descongelado �� 34 Luces �� 34 Cuidado durante las vacaciones

y mudanzas �� 34

SOLUCIÓN DE PROBLEMAS �� 35

Accesorios �� 36

GARANTÍA �� 37

SÉCURITÉ DU RÉFRIGÉRATEUR �� 38

Mise au rebut de votre vieux réfrigérateur �� 39

INSTRUCTIONS D’INSTALLATION �� 40

Déballage du réfrigérateur �� 40 Avant utilisation �� 40 Exigences d’emplacement �� 41 Spéciﬁcations électriques �� 41 Inversion du sens de l’ouverture

de la porte �� 42 Installer la poignée de porte �� 48

UTILISATION DU RÉFRIGÉRATEUR �� 49

Utilisation des commandes �� 49 Fonctions �� 49

CARACTÉRISTIQUES DU RÉFRIGÉRATEUR �� 51

Tablettes du réfrigérateur �� 52 Compartiment de refroidissement�� 52 Ventilation �� 52 Compartiment de congélation�� 52

ENTRETIEN DU RÉFRIGÉRATEUR �� 52

Nettoyage �� 52 Décongélation �� 53 Lampes �� 53 Précautions à prendre pour les

vacances ou le déménagement �� 53

DÉPANNAGE �� 54

Accessoires �� 55

GARANTIE �� 56

W11036835A

REFRIGERATOR SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

You can be killed or seriously injured if you don't immediately

DANGER

WARNING

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injury when using your refrigerator, follow these basic precautions:

follow instructions.

You

can be killed or seriously injured if you don't

instructions.

follow

■ Plug into a grounded 3 prong outlet�

■ Do not remove ground prong�

■ Do not use an adapter�

■ Do not use an extension cord�

■ Disconnect power before servicing�

■ Replace all parts and panels before operating�

■ Remove doors from your old refrigerator�

■ Use nonﬂammable cleaner�

■ Keep ﬂammable materials and vapors, such as gasoline,

away from refrigerator�

■ Use two or more people to move and install refrigerator�

■ Disconnect power before cleaning fan cover�

■ If the power supply cord is damaged, it must be replaced by

the manufacturer or its service agent or a similarly qualiﬁed person, in order to avoid a hazard�

SAVE THESE INSTRUCTIONS

■ Keep ventilation opening, in the appliance enclosure or in the

built-in structure, clear of obstruction�

■ This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure they do not play with the appliance.

■ Do not use mechanical devices or other means to accelerate

the defrosting process, other than those recommended by the manufacturer.

■ Do not use electrical appliances inside the food storage

compartments of the appliances, unless they are of the type recommended by the manufacturer.

■ Do not damage the refrigerant circuit.

2

Proper Disposal of Your Old Refrigerator

WARNING

Suffocation Hazard

Remove doors or lid from your old freezer or refrigerator.

Failure to do so can result in death or brain damage.

IMPORTANT: Child entrapment and suffocation are not problems of the past� Junked or abandoned refrigerators are still dangerous – even if they will sit for “just a few days�” If you are getting rid of your old refrigerator, please follow these instructions to help prevent accidents�

Before You Throw Away Your Old Refrigerator or Freezer:

■ Take off the doors�

■ Leave the shelves in place so that children may not easily

climb inside�

INSTALLATION INSTRUCTIONS

Important information to know about disposal of refrigerants:

Dispose of refrigerator in accordance with Federal and Local regulations. Refrigerants must be evacuated by a licensed, EPA certified refrigerant technician in accordance with established procedures.

Unpack the Refrigerator

WARNING

Excessive Weight Hazard

Use two or more people to move and install refrigerator.

Failure to do so can result in back or other injury.

Remove the Packaging

■ Remove tape and glue residue from surfaces before turning

on the refrigerator� Rub a small amount of liquid dish soap over the adhesive with your ﬁngers� Wipe with a damp cloth, then dry with a soft cloth�

■ Do not use sharp instruments, rubbing alcohol, ﬂammable

ﬂuids, or abrasive cleaners to remove tape or glue� These products can damage the surface of your refrigerator� For more information, see “Refrigerator Safety�”

■ Dispose of/recycle all packaging materials�

Before Use

When Moving Your Refrigerator:

Your refrigerator is heavy� When moving the refrigerator for cleaning or service, be sure to cover the ﬂoor with cardboard or hardboard to avoid ﬂoor damage� Always pull the refrigerator straight out when moving it� Do not wiggle or “walk” the refrigerator when trying to move it, as ﬂoor damage could occur�

■ Any work on the refrigerator must be carried out by a qualiﬁed

service technician�

■ Wait at least 2 hours before connecting the refrigerator to

a power supply to ensure that the refrigerant circuit is fully efﬁcient�

■ During installation, keep the power cord out of the way to

avoid damage�

■ The refrigerator must be level and not tilted to the rear�

Clean Before Using

After you remove all of the package materials, clean the inside of your refrigerator before using it� See the cleaning instructions in “Refrigerator Care�”

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold� Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping� Tempered glass is designed to shatter into many small, pebble-size pieces� This is normal� Glass shelves and covers are heavy� Use both hands when removing them to avoid dropping�

IMPORTANT:

■ To ensure best use of your refrigerator, read the instructions,

which contain a description of the refrigerator and other useful information�

3

Location Requirements

WARNING

Temperature

This refrigerator is intended for use in a location where the temperature ranges from a minimum of 50°F (10°C) to a maximum of 110°F (43°C)� The preferred room temperature range for optimum performance, which reduces electricity usage and provides superior cooling, is between 61°F (16°C) and 110°F (43°C)� It is recommended that you do not install the refrigerator near a heat source, such as an oven or radiator�

Explosion Hazard

Keep flammable materials and vapors, such as gasoline, away from refrigerator.

Failure to do so can result in death, explosion, or fire.

IMPORTANT:

■ This refrigerator is designed for indoor household use only�

■ Keep the refrigerator ventilation openings clear�

Ventilation and Clearance

To guarantee adequate ventilation, leave a space on both sides and above the appliance� The distance between the rear of the appliance and the wall behind the refrigerator should be at least 2" (5 cm)� A reduction of this space will increase the energy consumption of product�

To allow the door to swing open when installing your refrigerator next to a ﬁxed wall, the minimum amount of space required between the side of the refrigerator and the ﬁxed wall depends on how far the wall protrudes into the room�

Electrical Requirements

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Before you move your refrigerator into its ﬁnal location, it is important to make sure you have the proper electrical connection�

Recommended Grounding Method

A 115-volt, 60 Hz, AC-only, 15- or 20-amp fused, grounded electrical supply is required� It is recommended that a separate circuit serving only your refrigerator be provided� Use an outlet that cannot be turned off by a switch� Do not use an extension cord�

NOTE: Before performing any type of installation, cleaning, or removing a light bulb, disconnect the refrigerator from the electrical source� When you have ﬁnished, reconnect the refrigerator to the electrical source�

Fixed Wall (B) Minimum Space (A)

Less than 477/8" (121.6 cm) 0.2" (0.5 cm)

477/8" (121.6 cm) or more 1.57" (4 cm)

4

Reverse Door Swing (optional)

If you want to reverse the direction of the door swing so that the freezer and refrigerator doors open from the opposite side, see the following instructions�

NOTE: The direction of the door opening can be changed� If this operation is performed by a service provider, it is not covered by the warranty� It is recommended to reverse the door swing with two people�

Follow instruction in the Installation Guide� Gather the required tools and read all instructions before

removing doors�

Parts Supplied: Locate the Reversibility Kit (provided) in the crisper drawer� The kit contains (2) hinge plugs, (1) door stopper, and (1) cap plug�

Tools Needed: hex key No� 4, TORX® T25®†, Phillips screwdriver No� 1, ﬂat-blade screwdriver and a TORX® T15®�

A. Hinge plug (2) B. Door stopper (1) C. Cap plug (1)

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

2� Remove the plugs from both sides. Do not discard the

plugs.

D

C

3. Remove screws using hex key No. 4, and then remove

hinge.

1� Before you begin, unplug refrigerator or disconnect power

and remove food and door trays from the doors.

†®TORX and T25 are registered trademarks of Acument Intellectual Properties, LLC.

5

4� Open the door and lift upward to remove them.

Set the door aside.

5� Remove the screws holding the center hinge. Pull up on the

hinge to remove from door.

6� Open the door and lift upward to remove them� Move the square plug and the hinge bush from one side to the other (use a

at tool). Press in with your nger. Unscrew the door stopper from the bottom side of the door. Take the second one from the reversibility kit and screw it into the other side. Repeat the operation for both doors.

B. Door plug

6

7� Remove the screws holding the bottom hinge, then remove

the hinge and set it aside. Remove the screw from the bottom of the cabinet.

9� Reinstall the hinge, on the opposite side using the screws

removed earlier.

8� Replace the screw and the hinge to the opposite

side.

10� Remove the screw hole plugs and transfer them to the

opposite side or use new ones from the reversibility kit. Press into place with your nger.

7

11� Place the lower door on the bottom hinge.

12� Take the central hinge. Insert in place on the top surface of

the bottom door and screw it.

13� Place the upper door on the central hinge.

8

14� Screw the top hinge (use hexagonal screws).

Reverse Handles (if previously installed)

WARNING

Electrical Shock Hazard

Disconnect power before removing doors.

Failure to do so can result in death or electrical shock.

1. Unplug refrigerator or disconnect power�

2. Using a TORX® T15®, remove the handles from the left-hand

side of the door and remove the hole plugs from the righthand side�

3. Insert the hole plugs (from the Reversibility Kit) into the holes

remaining after the removal of the handles�

4. Install the door handles on the opposite side of the door�

15� Press the plugs into place.

C. Cap plug

9

A. Hinge plug

Final Steps

1. Check all holes to make sure that hole plugs and screws are

in place and are fully tightened�

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Install Door Handles

(on some models)

On some models the door handles are factory-installed� If your refrigerator does not have factory-installed handles, see the following instructions�

IMPORTANT: If you want to reverse the direction of the door swing, so that the freezer and refrigerator doors open from the opposite side, see “Reverse Door Swing” before installing the door handles�

Parts Supplied: The door handles are packed inside the freezer compartment, and the Reversibility kit containing the screws and hole plugs is in the crisper drawer in the refrigerator compartment�

Parts Location

■ Door handles (2)

■ Handle screws (4)

■ Handle plugs (4)

Gather the required tools�

Tools Needed: Phillips screwdriver

Install Handles

1. Remove the door handles from the packaging� Remove the

screws and hole plugs from the Reversibility Kit�

2. Using the screws, fasten the handles to the doors�

3. Insert the handle plugs to cover the screws�

Freezer compartment

Crisper drawer Crisper drawer

2. Plug into a grounded 3 prong outlet� NOTE: Allow refrigerator to stand upright at least 2 hours

before plugging in.

3. Return all removable door parts to door and food to refrigerator�

NOTE: Wait at least 24 hours for your refrigerator to cool completely before adding food. If you add food before the

refrigerator has cooled completely, your food may spoil�

10

REFRIGERATOR USE

Using the Controls

The control panel is located at the top front of the refrigerator compartment�

IMPORTANT:

■ After you plug in the refrigerator, it automatically begins to

cool�

■ The indicator LEDs on the control panel light up for

approximately 1 second and, following the initialization process, the temperature set point is displayed�

■ The controls are set correctly when milk or juice is as cold

as you like and when ice cream is ﬁrm�

■ Wait at least 24 hours for your refrigerator to cool completely

before adding food� If you add food before the refrigerator has cooled completely, your food may spoil�

NOTE: Adjusting the refrigerator and freezer temperature controls to a colder-than-recommended setting will not cool the compartments any faster�

■ If the temperature is too warm or too cold in the refrigerator

or freezer, ﬁrst check the air vents to be sure they are not blocked before adjusting the controls�

1 2 5

1� ON/STANDBY indicator 2� PARTY MODE indicator 3� BLACK OUT ALARM indicator 4� STOP ALARM indicator 5� FAST FREEZE indicator 6� TEMPERATURE DISPLAY

3 4 6

7 8

On/Standby

To put the product in Standby mode, press and hold the ON/STANDBY button for 3 seconds. All the indicators turn off except On/Standby indicator.

Press again to reactivate.

Party Mode

Press the PARTY MODE button to activate/deactivate the Party Mode function. Use this function to chill drinks inside the freezer compartment.

IMPORTANT: Do not leave inside the freezer compartment longer than the function is active (30 minutes).

9 1110

7� PARTY MODE button 8� STOP ALARM button 9� ON/STANDBY button 10� FAST FREEZE button 11� REFRIGERATOR TEMPERATURE

button

Functions

Fast Freeze

The use of this function is recommended when placing a very high quantity of food to be frozen in the freezer compartment. Twenty-four hours before freezing, press the Freezer button to activate the Fast Freeze function. When activated, the Fast Freeze indicator turns on. After 24 hours, place the food to be frozen in the middle of the freezer compartment. The function is automatically disabled after 48 hours or can be manually disabled by pressing the Fast Freeze button.

Refrigerator Light

The light system inside the refrigerator compartment uses LED lights, allowing for better lighting as well as a very low energy consumption.

If the LED light system does not work, please contact a service provider to arrange for repair.

IMPORTANT: The refrigerator compartment light switches on when the refrigerator door is opened. If the door is kept open for more than 10 minutes, the light will automatically be switched off.

11

ALARM TABLE

ALARM TYPE Signal Cause Cure

Door Open alarm The Acoustical alarm is activated and

the Alarm indicator blinks.

Temperature alarm

Long Blackout alarm

Party Mode alarm The Party Mode indicator blinks and

Malfunction The letter “F” blinks on the display. Product malfunction. Contact your service provider.

The Temperature display blinks (°C) and the Alarm indicator remains ON.

The Blackout Alarm icon remains on, the Alarm indicator blinks, and the Temperature display (°C) blinks, showing the maximum temperature reached during blackout.

the Acoustical alarm is activated.

The refrigerator or freezer door has remained open for more than 2 minutes.

The inside temperature is not adequate.

Prolonged power failure, able to cause the inside temperature to increase to 0°C.

30 min. elapsed since Party Mode function has been activated. Remove bottle(s) from the freezer.

Close the door or press the STOP ALARM to mute the acoustical alarm.

Press the STOP ALARM button; the acoustical alarm stops.

Press the STOP ALARM button to stop the alarm.

12

REFRIGERATOR FEATURES

Depending on your model, the number and type of features may vary�

A. LED lighting B. Fan C. Shelves D. Bottle rack E. Multi-flow cold air system F. Cooler compartment (meat) G. Rating plate H. Fruit and vegetable crisper I. Refrigerator drawer divider

J. Reversibility kit K. Separator L. Door trays M. Egg tray N. Upper basket (Total No Frost zone) O. Drawer divider P. Shelves Q. Door seals

13

Refrigerator Shelves

The shelves and door trays in your refrigerator are removable and adjustable to meet your storage needs�

NOTES:

■ Storing similar food items together in your refrigerator and

adjusting the shelves to t different heights of items will make nding the exact item you want easier. It will also reduce the amount of time the refrigerator door is open and save energy.

■ The refrigerator interior parts are not dishwasher safe.

Fan

The fan improves temperature distribution inside the refrigerator compartment, allowing better preservation of stored food� By default, the fan is on�

NOTE: Do not block the air intake area�

Glass Shelves

Important information to know about glass shelves and covers:

Do not clean glass shelves or covers with warm water when they are cold� Shelves and covers may break if exposed to sudden temperature changes or impact, such as bumping� Tempered glass is designed to shatter into many small, pebble-size pieces� This is normal� Glass shelves and covers are heavy� Use both hands when removing them to avoid dropping�

To remove a shelf:

1. Remove items from the shelf�

2. Slide the shelf straight out to the stop�

3. Lift the back of the shelf past the stop� Pull the shelf out

the rest of the way�

To replace a shelf:

1. Slide the back of the shelf into the track in the wall of the

cabinet�

2. Guide the front of the shelf into the shelf track� Be sure to

slide the shelf in all the way�

Cooler Compartment

(on some models)

The cooler compartment is the optimum place to store fresh meat, poultry, and ﬁsh�

To remove and replace the drawer:

1. Slide drawer straight out to the stop� Lift the drawer from

the slide rails and pull out the rest of the way�

2. Replace the drawer by placing it on the slide rails and

pushing it back into position past the drawer stop�

Freezer Compartment

To increase storage space and for larger items, the freezer compartment can be used without the baskets� Remove the baskets and place the items directly on the glass shelves�

REFRIGERATOR CARE

Cleaning

WARNING

Explosion Hazard

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

Periodically clean the appliance with a cloth and a solution of lukewarm water and neutral detergent speciﬁcally for refrigerator interiors�

Clean the outside of the appliance and the door seal with a damp cloth and dry with a soft cloth�

IMPORTANT:

■ Because air circulates between both sections, any odors

formed in one section will transfer to the other. You must thoroughly clean both sections to eliminate odors. To avoid odor transfer and drying out of food, wrap or cover foods tightly.

■ For stainless steel models, stainless steel is corrosion-

resistant but not corrosion-proof. To help avoid corrosion of your stainless steel, keep your surfaces clean by using the following cleaning instructions.

■ The buttons and control panel display must not be cleaned

with alcohol or alcohol-derived substances but with a dry cloth.

■ The refrigeration system pipes are located near the defrost

pan and can become hot. Periodically clean them with a vacuum cleaner.

14

Cleaning the Refrigerator

NOTE: Do not use abrasive or harsh cleaners such as window

sprays, scouring cleansers, flammable fluids, muriatic acid, cleaning waxes, concentrated detergents, bleaches, or cleansers containing petroleum products on exterior surfaces (doors and cabinet), plastic parts, interior and door liners, or gaskets� Do not use paper towels, scouring pads, or other harsh cleaning tools�

1. Unplug refrigerator or disconnect power�

2. Hand wash, rinse, and dry removable parts and interior

surfaces thoroughly� Use a clean sponge or soft cloth and a mild detergent in warm water�

3. Clean the exterior surfaces� Painted metal: Wash painted metal exteriors with a clean,

soft cloth or sponge and a mild detergent in warm water� Rinse surfaces with clean, warm water and dry immediately to avoid water spots�

Stainless steel: Wash stainless steel surfaces with a clean, soft cloth or sponge and a mild detergent in warm water� Rinse surfaces with clean, warm water and dry immediately to avoid water spots�

NOTE: When cleaning stainless steel, always wipe in the direction of the grain to avoid cross-grain scratching�

4. There is no need for routine condenser cleaning in normal

home operating environments� If the environment is particularly greasy or dusty, or there is signiﬁcant pet trafﬁc in the home, the condenser should be cleaned every 2 to 3 months to ensure maximum efﬁciency� If you

need to clean the condenser, use a vacuum cleaner.

5. Plug in refrigerator or reconnect power�

Lights

The light system inside the fridge compartment uses LEDs light, allowing for better lighting as well as very low energy consumption� If the LED light system does not work, please contact an authorized service provider to replace it�

Important: The refrigerator compartment light switches on when the refrigerator door is opened� If the door is kept open for more than 4 minutes, the light will be automatically switched off�

Vacation and Moving Care

Defrosting

NO-FROST REFRIGERATOR COMPARTMENT:

Refrigerator compartment defrosting is completely automatic� The defrost water is automatically run into a drain hole hidden behind Multi-ﬂow and collected in a container, where it evaporates�

NO-FROST FREEZER COMPARTMENT:

No-frost freezers provide chilled air circulation around the storage areas and prevent the formation of ice, thereby completely eliminating the need for defrosting� Frozen items don’t stick to the walls, labeling stays legible, and storage space remains neat and clear�

Vacation

If You Choose to Leave the Refrigerator On While You’re Away:

Use up or freeze perishable food�

If You Choose to Turn Off the Refrigerator Before You Leave:

1. Remove all food from the refrigerator�

2. Tape rubber or wood blocks to the tops of both doors to

prop them open far enough for air to get in� This stops odor and mold from building up�

Moving

1. Take out all removable parts, wrap them well, and tape

them together so they don’t shift and rattle during the move�

2. Unplug refrigerator�

3. Raise the leveling screws so they don't scrape the ﬂoor�

4. Tape the doors closed and tape the power cord to the back

of the refrigerator�

When you get to your new home, put everything back and refer to the “Installation Instructions” section for preparation instructions.

15

TROUBLESHOOTING

WARNING

Try the solutions suggested here first before calling for assistance.

WARNING

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

If you experience Possible Causes Recommended Solutions

The refrigerator is

not working

The motor seems to

run too much

The refrigerator

seems noisy

Functional noise can be reduced by leveling the refrigerator and ensuring it is located on an even ﬂoor�

■ There may be an appliance

power supply problem

Motor running time depends on different things: number of door openings, amount of food stored, temperature of the room, setting of the temperature controls�

The following sounds coming from your appliances are normal since it has a number of fans and engines to regulate performances that switch on and off automatically:

■ Check if power cable plugged into a live socket with the proper

■ Check if the protection devices and fuses of the electrical system

■ Make sure that the refrigerator controls are correctly set�

■ Check if there is not a large amount of food has been added

■ Check that the door is not opened too often�

■ Check that the door closes properly�

■ Hissing - When refrigerator comes on the rst time or after

■ Gurgling - Refrigerant uid entering the pipes.

■ Buzzing - When the water valve or fan starts working.

■ Cracking - When the compressor starts.

■ Abrupt Clicks - When the thermostat adjusts how often the

Use nonflammable cleaner.

Failure to do so can result in death, explosion, or fire.

voltage�

in your home�

to the refrigerator�

a long pause in operation.

compressor is running.

Explosion Hazard

The doors do not

open and close properly

16

■ There could be various

causes (see “Solutions”)

■ Check that food packages are not blocking the door.

■ Check that the internal parts are not out of position.

■ Check that the door seals are not dirty or sticky.

■ Ensure the refrigerator is level.

If you experience Possible Causes Recommended Solutions

The light does not

work

Temperature is too

warm

Temperature is

too cold in the refrigerator/crisper

Interior moisture

buildup

■ The light may need replacing

■ The refrigerator may be in On/

Standby mode

■ There could be various causes

(see “Solutions”)

■ Refrigerator air vent(s)

are blocked

■ Controls are not set correctly

for the surrounding conditions

■ The room is humid

■ The doors are opened often

or not closed completely

■ The airow vents inside the

compartment are blocked

■ Food packages are damp

■ Make sure the protection devices and fuses in the electrical

system in your home work well�

■ Check if the power cable is plugged into a live socket with

the proper voltage�

■ In case the LEDs are broken the user must call Service for

exchange of the same type available only at our after sales service centers or authorized dealer�

■ Make sure that the condenser (in back of the refrigerator) is

free of dust and uff.

■ Make sure that the door seals properly tted.

■ On hot days or if the room is warm, the motor naturally runs

longer.

■ If the refrigerator door has been left open for a while or if

large amounts of food have been stored, the motor will run longer in order to cool down the interior of the refrigerator.

■ If the air vent is blocked by items placed directly in front of

it, the refrigerator will get too cold. Move items away from the air vent.

■ Adjust the controls a setting warmer. Check the temperature

in 24 hours.

■ A humid environment contributes to moisture buildup.

■ Allows humid air to enter refrigerator. Minimize door

openings and close doors completely.

■ Move items away from the airow vents.

■ Package food properly and dry any dampness on storage

containers before placing them in the refrigerator.

There is water in the defrost pan

■ This is normal in hot, damp

weather. The pan can even be half full

Edges of refrigerator, which come into contact with the door

■ This is not a defect� This is

normal in hot weather and when

the compressor is running

seal, are warm to the touch

Accessories

The following accessories are available for your refrigerator� To order an accessory, contact us and ask for the part number�

In the U�S�A�, visit our web site www.whirlpool.com/accessories or call 1-800-253-1301�

In Canada, visit our web site www.whirlpoolparts.ca or call 1-800-807-6777�

■ Make sure the refrigerator is level so that the water does not

overow.

affresh® Stainless Steel Cleaner:

In U�S�A�, order Part #W10355016 In Canada, order Part #W10355016B

affresh® Stainless Steel Wipes:

In U�S�A�, order Part #W10355049 In Canada, order Part #W10355049B

affresh® Kitchen & Appliance Cleaner:

In U�S�A�, order Part #W10355010 In Canada, order Part #W10355010B

17