Maytag UMC5100ADW, UMC5100ADB, UMC5100ADS, UMC5100ADQ Dimension Guide
www.dexpress.com DIMENSION EXPRESS Fax on Demand (775) 833-3600
This Data Sheet Includes Information On
Maytag
• Product Model Number (s): •
Built-in Microwaves:
UMC5100ADW, UMC5100ADB, UMC5100ADS and
UMC5100ADQ
• Dimensions (Actual Size) •
Height including feet:
Unit width:
Depth:
14 1/4"
16"
23 1/2"
• Additional Information •
• Height NOT including countertop feet: 13 1/4".
• Electrical requirements: Voltage 120, single phase,
60Hz. AC. 15 amp fuse ( 20 amp fuse recommended).
Ground circuit required. Locate outlet box in the
cabinet behind the microwave (flush mount is required
for cabinets less than 24" deep).
• For built-in applications the cabinet floor must be level
and capable of supporting 100 lbs.
• Approved for installation over Maytag single electric
wall ovens.
• For a new installation, the bottom of the cutout should
be 48" above the floor. This places the bottom of the
microwave 50" above the floor.
Kits:
• UXA1030AD : Trim kit for built-in installation. See
page 2 for cutout dimensions.
• UXA1027AD: Trim kit for built-in installation. See
page 2 for cutout dimensions.
23 1/2"
14 1/4"
(not to scale)
16"
See page 2 for additional information
Subject to change without notice. This system is designed to
be updated daily if necessary. Dimension Express is not
responsible for use of superseded, voided, or outdated data
sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall
not exceed $50.00.
Copyright © Dimension Express, 2002.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
132
BN • A132B315 • • 032603 • 95658 • 67345
www.dexpress.com
DIMENSION EXPRESS
Fax on Demand (775) 833-3600
Additional Information:
This Data Sheet Includes Information On
Maytag
• Product Model Number (s): •
Page 2
UMC5100ADW, UMC5100ADB, UMC5100ADS and
Built-in Microwaves:
UMC5100ADQ
UMC5100AD installed with Trim Kits UXA1030AD
21" min.
28 1/2"
Oven cutout or
cabinet below
(Check oven
specifications for
oven cutout)
21" min.
25 1/2"
16 1/16"
(not to scale)
48"
recommended
distance to floor.
UMC5100AD installed with Trim Kits UXA1027AD
16 1/16"
(not to scale)
Minimum cabinet width: 30"
Cutout width: 28 1/2"
Cutout height: 16 1/16"
Minimum cabinet depth: 21"
Overall trim kit width: 29 3/4"
Overall trim kit height: 17"
Minimum cabinet width: 27"
Cutout width: 25 1/2"
Cutout height: 16 1/16"
Minimum cabinet depth: 21"
Overall trim kit width: 26 3/4"
Overall trim kit height: 17"
Oven cutout or
cabinet below
48"
recommended
distance to floor.
(Check oven
specifications for
oven cutout)
Subject to change without notice. This system is designed to be updated daily if necessary. Dimension Express is not responsible for use of superseded, voided, or
outdated data sheets. Because of the difficulty or impracticability of determining actual damages, liability of Dimension Express shall not exceed $50.00.
Copyright © Dimension Express, 2002.
• NEVER reuse Data Sheets. Data Sheets are subject to change without • Call Dimension Express if you have any questions at (775) 833-3633 •
notice. Dimension Express is a FREE service bureau and is updated daily, • Always refer to a current Code at a Glance or manufacturer directory •
it makes far more sense to spend the time necessary to request new Data • Data Sheet codes change on the first of odd numbered months at 12:01am •
Sheets for each project, as opposed to the problems, time, costs, and risks
associated with reusing old Data Sheets.
BN • A132B315 • • 032603 • 95658 • 67345
315
Loading...