Maytag SAV505DAWW User Manual [en, fr, es]

SAV-3
Maytag Clothes Washer
Congratulations on your purchase of a Maytag clothes washer! Your satisfaction is very important to us.
Read this manual for best results. It con­tains instructions to acquaint you with proper operating and maintenance procedures.
In addition you will find a Laundering Tips guide packed with your clothes washer. It contains infor­mation on recommended laundering procedures, stain removal and special laundering situations.
Save time and money. If something should go wrong, we suggest consulting the “Before You Call” section. It is designed to help you solve basic prob­lems before consulting a servicer.
If you have questions, write us (include your model number and phone number) or call:
Maytag Appliances Sales Company Attn: CAIR
®
Center P.O. Box 2370 Cleveland, TN 37320-2370 1-800-688-9900 USA 1-800-688-2002 CANADA 1-800-688-2080 USA TTY (for deaf, hearing impaired or speech impaired) (Mon.–Fri., 8am–8pm Eastern Time) Internet: http://www.maytag.com
Table of Contents
Safety Instructions . . . . . . . . . . . . . . . . 1
Operating Tips. . . . . . . . . . . . . . . . . . . . 2
Controls at a Glance . . . . . . . . . . . . . . 3-5
Special Features . . . . . . . . . . . . . . . . . . 6
Care and Cleaning. . . . . . . . . . . . . . . . . 7
Storing the Water. . . . . . . . . . . . . . . . . . 7
Before You Call . . . . . . . . . . . . . . . . . . . 8
Warranty. . . . . . . . . . . . . . . . . . . . . . . . . 9
Guide de L’Utilisateur . . . . . . . . . . . . . 10
Guía del Usuario . . . . . . . . . . . . . . . . . 20
Form No. A/09/02 Part No. 2200535 MCS Part No. 27001034 ©2002 Maytag Appliances Sales Co.
USER’S GUIDE
®
1. Read all instructions before using the appliance.
2. As with any equipment using electricity and having moving parts, there are potential hazards. To use this appliance safely, the operator should become familiar with the instructions for operation of the appliance and always exercise care when using it.
3. Do not install or store this appliance where it will be exposed to the weather.
4. Install and level washer on a floor that can support the weight.
5. This appliance must be properly grounded. Never plug the appliance cord into a receptacle which is not ground­ed adequately and in accordance with local and national codes. See installation instructions for grounding this appliance.
6. To avoid the possibility of fire or explosion: a. Do not wash items that have been previously cleaned
in, washed in, soaked in, or spotted with gasoline, dry­cleaning solvents, other flammable or explosive sub­stances as they give off vapors that could ignite or explode. Hand wash and line dry any items containing these substances.
Any material on which you have used a cleaning sol­vent, or which is saturated with flammable liquids or solids, should not be placed in the washer until all traces of these liquids or solids and their fumes have been removed.
These items include acetone, denatured alcohol, gaso­line, kerosene, some liquid household cleaners, some spot removers, turpentine, waxes and wax removers.
b. Do not add gasoline, dry-cleaning solvents, or other
flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.
c. Under certain conditions, hydrogen gas may be pro-
duced in a hot water system that has not been used for 2 weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing machine or combina­tion washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. As the gas is flammable, do not smoke or use an open flame during this time.
7. Do not reach into the appliance if the tub or agitator is moving.
8. Do not allow children or pets to play on, in, or in front of the appliance. Close supervision is necessary when the appliance is used near children and pets.
9. Do not tamper with controls.
10. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in published user-repair instructions that you under­stand and have the skills to carry out.
1
SAVE THESE INSTRUCTIONS
Important Safety Instructions
11. Unplug power supply cord before attempting to service your washer.
12. The agitator should not be removed. If the agitator is removed, it must be replaced by pushing down com­pletely and the locking screw tightened before the wash­er is operated.
13. Store laundry aids and other material in a cool, dry place where children cannot reach them.
14. Do not wash or dry items that are soiled with vegetable or cooking oil. These items may contain some oil after laundering. Due to the remaining oil, the fabric may smoke or catch fire by itself.
15. Do not use chlorine bleach and ammonia or acids (such as vinegar or rust remover) in the same wash. Hazardous fumes can form.
16. Do not machine wash fiberglass materials. Small parti­cles can stick to fabrics washed in following loads and cause skin irritation.
17. Before the appliance is removed from service or discard­ed, remove the door to the washing compartment.
18. Inlet hoses are subject to damage and deterioration over time. Check the hoses periodically for bulges, kinks, cuts, wear or leaks and replace them every five years.
WARNING: To reduce the risk of fire, explosion, electric shock, or personal injury when using your washer, follow basic safety precautions, including the following:
Recognize safety symbols, words, labels
WARNING – Hazards or unsafe practices which COULD result in severe personal injury or death.
CAUTION – Hazards or unsafe practices which COULD result in minor personal injury.
WARNING
CAUTION
What you need to know about safety instructions
Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and sit­uations that may occur. Common sense, caution, and care must be exercised when installing, maintaining or operating appliance.
Always contact your dealer, distributor, service agent, or manufacturer about problems or conditions you do not understand.
Operating Tips
2
Loading
• Put dry, unfolded clothes loosely in the tub, up to the top row of holes for a maximum load.
• Do not wrap large items like sheets around the agita­tor.
• Mix large and small items for best circulation. Wash bulky items like blankets separately.
• When laundering permanent press items or items of delicate construction, washable woolens or loosely knit items, never use less than the MEDIUM water level setting. This will minimize shrinkage, wrinkling and pulling of seams.
• For best results add the detergent to the washtub before adding the load.
• Close lid carefully to avoid slamming.
Additional tips
• During the spin, it is possible for the load to become
unevenly distributed in the tub. If this happens, push in the control knob, open the lid, redistribute the load, close the lid and pull out the control knob. The spin will resume at the point it was interrupted.
• The washer will pause briefly throughout each cycle.
These pauses are normal.
For detailed information on sorting, pretreating stains, etc., see the enclosed Laundering Tips pamphlet.
Detergent
• Use either liquid or granular laundry detergent. For best results, be sure detergent is added to the wash­er BEFORE the load and be sure the wash water is above 65° F.
• Use the correct amount of detergent for the load size, soil level and water conditions. Use more detergent if you have hard water and very soiled loads.
If you have soft water or a lightly soiled load, use less detergent. (See manufacturer’s instructions.)
•Wipe up any detergent spills on the washer.
• This washer is designed so that it will not agitate or spin when the lid is open. It will, however, fill with the lid open so water is available for pretreating stains or diluting fabric softener.
• If you open the lid during a cycle, the washer will stop. When the lid is closed and the control knob pulled out, the washer will continue the cycle at the point it was interrupted.
Step 3
Step 1
3
REMEMBER: Items must circulate freely for best results.
Controls at a Glance
Select Wash/Rinse Temperature
Your washer provides you with a choice of hot, warm or cold water for washing and cold or warm water for rinsing.
Automatic Temperature Control (A.T.C.) selections provide the optimal wash water temperature for clean­ing.
There may be warm water filling during a cold wash or hot water during a warm wash. This is normal.
Select Water Level
Turn the Water Level knob to the setting that matches the size of the load.
If more water is needed once the fill is complete, turn the knob to reset and then to the proper setting.
Step 2 Extra Rinse (if desired)
Provides an additional rinse near the end of the cycle to more completely remove laundry additives, perfumes, etc.
Mini
Medium
Large
Super
1/4 Full 1/3 – 1/2 Full 1/2 – 3/4 Full
3/4 Full
WATER LEVEL SETTING LOAD SIZE
REMEMBER: In wash water temperatures below 65° F, deter­gents do not dissolve well or clean well.
4
Sturdy fabrics needing maxi­mum water extraction.
Sturdy fabrics needing a slower spin speed because of wrinkling.
Delicate fabrics needing slower spin speed because of clothing construction.
Regular
Fast/Fast
Easy Care
Fast/Slow
Delicates
Slow/Slow
WASH/SPIN SPEEDS
Select Wash/Spin Speed
Your washer has selectable wash and spin speed com­binations.
Step 4
LOAD TYPE
Step 3 (continued)
Control features vary by model.
Hot
Cold
Warm Warm
Warm
Cold Cold
Cold
A.T.C. Warm
Cold
A.T.C.
Cold Cold
WASH/RINSE TEMPS LOAD TYPE
These settings feature automatic temperature control.
White and heavily soiled, color-fast items.
Moderately soiled, colored items.
Moderately soiled, colored items; most wrinkle-free items.
Brightly colored, lightly soiled items; washable woolens.
Assures warm water wash temperature of approxi­mately 95° F. Provides opti­mum cleaning results.
Assures cold water wash temperature of approxi­mately 75° F to properly activate detergent.
5
Controls at a Glance
(continued)
Step 6
Step 5 Select Cycle
To select a cycle, push the control dial IN and turn until the pointer is at the number of minutes desired for the wash load.
Pull Control Dial Out to Start
You may stop the washer at any time by simply push­ing the control dial IN. Therefore it is possible to obtain a non-agitated soak or to shorten, skip or repeat any part of a cycle. The control dial must be pushed IN (off position) when you change the setting.
See Laundering Tips for proper washing procedures, stain removal, and special laundering situations.
Soak Only Cycle
Soak Only is designed to soak heavily soiled or stained items as desired. The user then advances the control knob into a wash cycle or spin and drain. Soaking should be no more than 30 minutes.
Regular Cycle
Regular Cycle is used for normal, sturdy fabrics and uses the following settings:
HEAVY: approximately 14-18 minutes of wash time. NORMAL: approximately 10-13 minutes of wash time. LIGHT: approximately 7-9 minutes of wash time.
Easy Care/Permanent Press Cycle
This cycle is designed to minimize wrinkles with a cool-down spray rinse following the wash and uses the following settings:
HEAVY: approximately 10-14 minutes of wash time. NORMAL: approximately 7-9 minutes of wash time. LIGHT: approximately 5-6 minutes of wash time.
Delicates Cycle
Delicates is designed for items requiring delicate wash action and uses the following settings:
NORMAL: approximately 10-12 minutes of wash time. LIGHT: approximately 7-9
minutes of wash time.
6
Bleach Dispenser
The dispenser automatically dilutes liquid chlorine bleach before it reaches your wash load. To use, follow these steps:
1. Measure liquid chlorine bleach carefully, following the instructions on the bottle.
2. Add the bleach to the dispenser before adding the load. Avoid splashing or over-filling the dispenser.
NOTE:
• Never pour undiluted liquid chlorine bleach directly
onto the load or into the wash tub. It is a powerful chemical and can cause fabric damage, such as tear­ing or color loss, if not used properly.
•If you prefer to use color-safe, non-chlorine bleach,
pour it into the wash tub with your detergent. Do not pour non-chlorine bleaches into the bleach dispenser.
Pour liquid chlorine bleach into
bleach dispenser.
Special features
Fabric Softener Dispenser
This dispenser automatically releases liquid fabric sof­tener at the proper time during the cycle. To use, follow these steps:
1. Pour a measured amount of desired liquid into the dispenser to fill line only.
2. If liquid comes below line, add warm water.
NOTE:
• Do not stop the washer during the first spin. This will cause the dispenser to empty too soon.
• Never pour fabric softener directly on the load. It will leave spots and stains.
•Use the dispenser for liquid fabric softeners only. Clean the area in and around the dispenser frequent­ly with hot water, detergent and a soft brush.
Pour liquid fabric softener into cup and
dilute with warm water.
7
Care and Cleaning
Turn off the water faucets after finishing the day’s washing. This will shut off the water supply to the washer and prevent the unlikely possibility of damage from escaping water.
Use a soft cloth to wipe up all detergent, bleach or other spills as they occur.
Clean the following as recommended:
Control Panel – clean with a soft, damp cloth and glass
cleaner. Do not use abrasive powders or cleaning pads.
Cabinet – clean with soap and water followed with an
appliance wax, if desired.
Lint Filter – it is self-cleaning and requires no mainte-
nance. The filter is located under the agitator on the bottom of the washtub. During the wash and rinse portion of the cycle, lint is collected on the filter. Then during the spin and drain the filter is cleaned automat­ically.
Storing the Washer
Interior – hard water deposits may be removed, if
needed, using a recommended cleaner labeled washer safe.
The interior of the washer should be cleaned periodi­cally to remove dirt, soil, odor or bacteria residue that may remain in the washer as a result of washing clothes. We recommend taking the following steps every 60 to 120 days to clean and freshen your washer interior. The frequency with which the washer should be cleaned and freshened depends on factors such as usage, the amount of dirt, soil or bacteria being run through your washer, or the use of cold water.
To clean and freshen the washer interior:
1. Add a measured amount of chlorine bleach to the bleach dispenser, following package directions.
2. Add 1/4 cup of detergent to the tub.
3. Run the washer through a complete cycle using hot water.
4. Repeat the process if necessary.
Washers can be damaged if water is not removed from hoses and internal components before storage. Prepare the washer for storage as follows:
• Select Regular, Light, and add one cup of chlorine bleach OR white vinegar to a full load of water with­out clothes. Run the washer through a complete cycle. (Do not mix bleach and vinegar in the same wash. Hazardous fumes can form.)
•Turn the water faucets off and disconnect the inlet hoses.
• Advance the cycle control knob to Spin and lower the drain hose to eliminate any water that may be in the drain hose.
• Disconnect the washer from the electrical supply and leave the washer lid open to let air circulate inside the tub.
8
Before You Call
Won’t Fill
• Plug cord into live electrical outlet.
• Check fuse or reset circuit breaker.
• Turn the control knob to proper cycle and pull knob out to start the washer.
• Turn both faucets on fully.
• Straighten inlet hoses.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
Won’t Agitate
• Check fuse or reset circuit breaker.
• Make sure the lid is completely closed.
• Turn the control knob to proper cycle and pull knob out to start the washer.
• Close lid and pull knob out to start the washer. For your safety, washer will not agitate or spin unless the lid is closed.
• Pauses are normal. Wait and see if the washer will start again.
Won’t Spin or Drain
• Check fuse or reset circuit breaker.
• Straighten drain hoses. Eliminate kinked hoses. If there is a drain restriction, call for service.
• Close lid and pull knob out to start the washer. For your safety, washer will not agitate or spin unless the lid is closed.
• Suds lock – caused by too much suds. Rewash without detergent. Use correct amount of a low-sudsing detergent.
Load is Wet
• Unevenly distributed load. Redistribute the load, close the lid and pull knob out. Check for leveling. Be sure water level is acceptable for load size.
• A normal spin speed is recommended for heavy loads like jeans or towels.
Stops
• Plug cord into live electrical outlet.
• Check fuse or reset circuit breaker.
• Turn the control knob to proper cycle and pull knob out to start the washer.
• Close lid and pull knob out to start the washer. For your safety, washer will not agitate or spin unless lid is closed.
• This may be a pause or soak period in the cycle. Wait briefly and it may start.
Leaks Water
• Make sure hose connections are tight.
• Make sure end of drain hose is correctly inserted and secured to drain facility.
• Avoid extended soaking – soak for 30 minutes or less.
• Avoid overloading.
Is Noisy
• Be sure washer is leveled properly as outlined in installation manual.
• Weak floors can cause vibration and walking.
• Be sure rubber feet are installed on leveling legs.
• Operating sounds will vary depending on agitation speed.
Fills with the Wrong Temperature Water
• Turn both faucets on fully.
• If equipped with a temperature selector knob, be sure it is set directly on a temperature setting and not between settings.
• Make sure temperature selection is correct.
• If Auto Temperature Control is selected, cold water may feel warmer than cold water from the tap. (See page 3).
• Make sure hoses are connected to correct faucets and inlet connections. Be sure water supply is regulated correctly. Flush water line before filling washer.
• Check the water heater. It should be set to deliver a minimum 120°F (49°C) hot water at the tap. Also check water heater capacity and recovery rate.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
Cycle Selector Advances Through Off
• Extra Rinse is selected.
For further assistance contact Maytag Appliances Sales Company, Maytag Customer Assistance:
U.S. 1-800-688-9900 or Canada 1-800-688-2002
U.S. customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
For problem laundry solutions (i.e. fabric damage, residue, tangling) and special laundry care procedures, see the enclosed Laundry Tips brochure.
9
Full One Year Warranty
For one (1) year from the date of original retail purchase, any part which fails in normal home use will be repaired or replaced free of charge.
Limited Warranty
After the first year from date of original retail purchase, through the time periods listed below, the parts designated below which fail in normal home use will be repaired or replaced free of charge for the part itself, with the owner pay­ing all other costs, including labor, mileage and transportation.
Second Year – All parts. Third through Fifth Year – The drive motor. All parts of the solid state controls (if so equipped). Third through Tenth Year – All parts of the transmission assembly. Third through Lifetime – Inner wash basket. Additional Limited Warranty Against Rust-Through
Should an exterior cabinet, including the top, lid and baseframe, rust through during the one year period starting from the date of retail purchase, repair or replacement will be made free of charge. After the first and through the tenth year, repair or replacement will be made free of charge for the part itself, with the owner paying all other costs, including labor, mileage and transportation.
Please Note: This full warranty and the limited warranty apply when the washer is located in the United States or Canada. Washers located elsewhere are covered by the limited warranty only, including parts which fail during the first two years.
Canadian Residents
This warranty covers only those appliances installed in Canada that have been listed with the Canadian Standards Association unless the appliances are brought into Canada due to transfer of residence from the United States to Canada.
The specific warranties expressed above are the ONLY warranties provided by the manufacturer. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state.
Maytag Clothes Washer Warranty
TO OBTAIN WARRANTY SERVICE
To locate an authorized service company in your area contact the Maytag dealer from whom your appliance was purchased; or call Maytag Appliances Sales Company, Maytag Customer Assistance. Should you not receive satisfactory warranty serv­ice, please call or write:
Maytag Appliances Sales Company Attn: CAIR®Center P.O. Box 2370 Cleveland, TN 37320-2370
U.S. 1-800-688-9900 Canada 1-800-688-2002 U.S. Customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.
When contacting Maytag Appliances Sales Company, Maytag Customer Assistance about a service problem, please include the following:
(a) Your name, address and telephone number; (b) Model number and serial number (found on the back center of the control panel) of your appliance; (c) Name and address of your dealer and the date the appliance was purchased; (d) A clear description of the problem you are having. (e) Proof of purchase.
1. Conditions and damages resulting from any of the following: a. Improper installation, delivery, or maintenance. b. Any repair, modification, alteration or adjustment
not authorized by the manufacturer or an authorized
servicer. c. Misuse, abuse, accidents or unreasonable use. d. Incorrect electric current, voltage or supply. e. Improper setting of any control.
2. Warranties are void if the original serial numbers have been removed, altered, or cannot be readily determined.
3. Products purchased for commercial or industrial use.
4. The cost of service or service call to: a. Correct installation errors. b. Instruct the user on proper use of the product. c. Transport the appliance to the servicer.
5. Consequential or incidental damages sustained by any person as a result of any breach of these warranties.
Some states do not allow the exclusion or limitation of con­sequential or incidental damages, so the above exclusion may not apply.
What is not covered by these warranties:
User’s Guides, service manuals and parts catalogs are available from Maytag Appliances Sales Company, Maytag Customer Assistance.
Loading...
+ 22 hidden pages