Maytag PAVT-1 User Manual

PAVT-1

Use & Care Guide

Table of Contents

Safety . . . . . . . . . . . . . . . . . . 1-2

Operating Tips . . . . . . . . . . 3-4

Detergent Loading Additional Tips

Using the Controls

(Two-Speed Models)

. . . . . . . . 5-6

Select Water Level Select Wash/Rinse Temperature Select Cycle Pull Control Dial Out to Start

(Speed-Select Models)

. . . . . . . 7-9

Select Water Level Select Wash/Rinse Temperature Select Extra Rinse Select Wash/Spin Speed Select Cycle Pull Control Dial Out to Start

Special Features . . . . . . . 10-11

Liquid Bleach Dispenser Fabric Softener Dispenser Finger Faucet End of Cycle Signal Automatic Lint Filtering System Safety Spin Unbalanced Spin Load Compensator Overload Protector

Care & Cleaning . . . . . . . . . . 12

Troubleshooting . . . . . . . . 13-14

Service & Warranty . . . . . . . . 15

Guide d’utilisation

et d’entretien . . . . . . . . . . . 16

Guía de uso y cuidado . . . . . 32

Safety

WARNING – Hazards or unsafe practices which COULD result in severe personal injury or death.

WARNING

CAUTION – Hazards or unsafe practices which COULD result in minor personal injury.

CAUTION

Installer: Please leave this manual with this appliance.

Consumer: Please read and keep this manual for future reference. Keep sales receipt and/or canceled check as proof of purchase.

Model Number _______________________________

Serial Number ________________________________

Date of Purchase______________________________

If you have questions, call: Maytag Customer Assistance

1-800-688-9900 U.S.A. 1-800-688-2002 Canada (Mon.-Fri., 8am-8pm Eastern Time) Internet: http://www.maytag.com

U.S. Customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.

In our continuing effort to improve the quality and performance of our appliances, it may be necessary to make changes to the appliance without revising this guide.

For service information, see page 15.

What You Need to Know About Safety Instructions

Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and situations that may occur. Common sense, caution and care must be exercised when installing, maintaining or operating appliance.

Always contact your dealer, distributor, service agent or manufacturer about problems or conditions you do not understand.

Recognize Safety Symbols, Words, Labels

WARNING! FIRE HAZARD

Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

Do not wash articles which have been previously cleaned, washed, soaked, or spotted with gasoline, dry-cleaning solvents, oil, waxes, chemical solvents, alcohol, turpentine, or other flammable or explosive materials. These substances will be retained in articles, and articles which still contain these flammable or explosive substances give off vapors that could ignite or explode.

Observe these precautions when using cleaning fluids, spot or stain removers, etc. These products should be labeled “flammable.” Use according to manufacturers directions in a well ventilated area or outdoors. Thoroughly rinse articles by hand before placing them in the washer. Some of these products – rust removers for example – will damage components and the finish of the washer.

Keep area around and underneath washer free from the accumulation of combustible materials, such as lint, paper, rags, gasoline, and all other flammable vapors and liquids.

HYDROGEN GAS IS EXPLOSIVE! Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. If the hot water system has not been used for such a period, before using the washer, turn on all the hot water faucets and let the water flow from each faucet for several minutes. This will release any accumulated hydrogen gas. As this gas is flammable, do not smoke or use an open flame during this time.

Recent studies have shown that if vegetable oil contaminated materials are incompletely washed, a carry-over and buildup of the oil may contribute to a chemical reaction (spontaneous combustion) that could cause a load to catch fire by itself. This would be more likely to happen if the load were left in the dryer after tumbling stopped or if items were folded and stacked while warm.

1. Read all instructions carefully before using the washer. Retain all instructions for future reference.

2. Properly install and locate in accordance with the Installation Instructions.

Must be properly grounded-see Installation Instructions.

Should anyone get an electric shock from the washer, disconnect electrical power. Do not operate until it has been repaired by a qualified service technician.

Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.

Connect to a properly rated, protected and sized power supply circuit. See Electrical Requirements.

Connect to adequate plumbing and drain facilities. Have a qualified service technician install your

washer.

3. To prevent injury to children: Do not allow children to play inside, on, or with the

washer. Close supervision of children is necessary when

using the washer. When children are mature enough, instruct them in

the safe, correct use of the washer. Keep all laundry aids out of the reach of children,

preferably in a locked cabinet. Use laundry aids only as directed by the manufacturer observing all warnings on container labels.

To reduce the risk of fire, explosion, electric shock, or personal injury when using your washer, follow basic safety precautions, including the following:

WARNING

Destroy the carton and plastic bags after unpacking the washer. Cartons covered with rugs, bedspreads, or plastic sheet can create a chamber with inadequate ventilation.

Remove the door to the washing compartment before the washer is removed from service or discarded.

4. Do not reach into the washer if the tub or agitator is moving. The washer is equipped with a safety switch for your protection. If action does not stop when the washer lid is opened during the spin cycle, disconnect the electrical power to the washer. Do not operate the washer until it has been repaired by a qualified technician.

5. Do not tamper with the operating controls.

6. To prevent personal injury and damage to the washer, do not repair or replace any part of the washer or attempt any servicing. Servicing should be referred to a qualified service technician.

7. Do not wash fiberglass articles unless recommended by manufacturer.

8. Flame resistant finishes – improper laundering could remove them. Follow garment manufacturer’s instructions carefully.

9. When moving, have the washer checked and properly installed by a qualified technician.

10. Inlet hoses are subject to damage and deterioration over time. Check the hoses periodically for bulges, kinks, cuts, wear or leaks and replace them every five years.

11. Do not allow pets to be inside, on, or in front of the washer.

Safety

SAVE THESE INSTRUCTIONS

Operating Tips

Detergent

• Use either liquid or granular laundry detergent. For best results, be sure detergent is added to the washer BEFORE the load and be sure the wash water is above 65

• Use the correct amount of detergent for the load size, soil level and water conditions. Use more detergent if you have hard water and very soiled loads.

If you have soft water or a lightly soiled load, use less detergent. (See manufacturer’s instructions.)

• Wipe up any detergent spills on the washer.

• Put dry, unfolded clothes loosely in the tub, up to the top row of holes for a maximum load.

• Do not wrap large items like sheets around the agitator.

• Mix large and small items for best circulation. Wash bulky items like blankets separately.

• When laundering wrinkle free items or items of delicate construction, washable woolens or loosely knit items, never use less than the MEDIUM water level setting. This will minimize shrinkage, wrinkling and pulling of seams.

• For best results add the detergent to the washtub before adding the load.

• Close lid carefully to avoid slamming.

Additional Tips

• During the spin, it is possible for the load to become unevenly distributed in the tub. If this happens, push in the control knob, open the lid, redistribute the load, close the lid and pull out the control knob. The spin will resume at the point it was interrupted.

• The washer will pause briefly throughout each cycle. These pauses are normal.

• This washer is designed so that it will not spin when the lid is open. It will, however, fill and agitate with the lid open so water is available for pretreating stains or diluting fabric softener.

• If you open the lid during a spin cycle, the washer will stop. When the lid is closed and the control dial pulled out, the washer will continue the cycle at the point it was interrupted.

Operating Tips

For detailed information on sorting, pretreating stains, etc., see the enclosed Laundering Tips brochure.

Using the Controls – Two-Speed Models

Select Water Level

Determine the selected setting based on clothes load size. Selection should provide sufficient water to permit clothes to circulate freely during agitation.

It may become necessary, due to bulky fabrics, to adjust the water level after agitation begins. To adjust the water level, turn the control to reset and then back to the desired setting.

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold water for washing and cold or warm water for rinsing. Use the chart below as a guide.

STEP 1 STEP 2

WATER LEVEL SETTING LOAD SIZE

Mini 1/4 Full

Medium 1/4 – 1/2 Full

Large 1/2 – 3/4 Full

Oversize 3/4 – Full

Note

• Items must circulate freely for best results.

Note

• In wash water temperatures below 60°F, detergents do not dissolve well or clean well.

Hot/Cold

White and heavily soiled, color-fast items

Warm/Warm Delicate items

Warm/Cold

Moderately soiled, colored items; most permanent press items

Cold/Cold

Brightly colored, lightly soiled items; washable woolens

WASH/RINSE LOAD TYPE

TEMPS

Pull Control Dial Out to Start

You may stop the washer at any time by simply pushing the control dial IN. Therefore it is possible to obtain a non-agitated soak or to shorten, skip or repeat any part of a cycle. The control dial must be pushed IN (off position) when you change the setting.

STEP 3 STEP 4

Note

• Do not attempt to turn the control dial counterclockwise. Damage to the timer will result.

Select Cycle

To select a cycle, push the control dial IN (off position) and turn it to the right (clockwise) until the pointer is at the soil level needed for the wash load in the Regular, Wrinkle Free Fabrics or Delicates cycles.

Regular Fabrics Cycle

Provides normal agitation and normal spin speeds to wash cottons and heavily soiled items. For maximum cleaning, set the dial at Extra Heavy.

Wrinkle Free Fabrics Cycle

Provides normal agitation and slow spin speed to protect wrinkle free fabrics.

Delicates Cycle

Provides slow agitation speed and slow spin speed for delicates and knits.

Control features vary by model.

See Laundering Tips for proper washing procedures, stain removal, and special laundering situations.

Using the Controls – Speed Select Models

Select Water Level

Determine the selected setting based on clothes load size. On select models, the infinite control allows you to select a specific setting or anywhere in between.

It may become necessary, due to bulky fabrics, to adjust the water level after agitation begins. To adjust the water level, turn the control to reset and then back to the desired setting.

Select Wash/Rinse Temperature

Your washer gives you a choice of hot, warm or cold water for washing and cold or warm water (select models) for rinsing. Use the chart below as a guide.

STEP 1 STEP 2

WATER LEVEL SETTING LOAD SIZE

Mini 1/4 Full

Medium 1/4 – 1/2 Full

Large 1/2 – 3/4 Full

Oversize 3/4 – Full

Note

• Items must circulate freely for best results.

Hot/Cold

White and heavily soiled, color-fast items

Warm/Cold

Moderately soiled, colored items; most wrinkle free items

Warm/Warm Delicate items

Cold/Cold

Brightly colored, lightly soiled items; washable woolens

WASH/RINSE LOAD TYPE

TEMPS

Automatic Temperature Control (A.T.C.) (select models) provides the optimal wash water

temperatures for cleaning. To save energy, Automatic Temperature Control will regulate wash water temperatures by mixing hot and cold water to reach the proper water temperature.

These settings feature Automatic Temperature Control:

A.T.C. Hot/Cold Assures hot water wash temperature of

approximately 110

° F. Provides optimum

cleaning results.

A.T.C. Warm/Cold Assures warm water wash temperature

of 78

° F. Use for most loads.

A.T.C. Cold/Cold Assures cold water wash temperature of

65° F to properly activate detergent

Select Wash/Spin Speed

Your washer has selectable wash and spin speed combinations.

STEP 3

STEP 4

Note

• In wash water temperatures below 60°F, detergents do not dissolve well or clean well.

Select Extra Rinse (if desired)

(select models)

When the knob is in the “On” position, an additional rinse at the end of the Regular and Wrinkle Free Fabrics cycles is provided to more completely remove laundry additives, suds, perfumes, etc.

Control features vary by model.

WASH/RINSE LOAD TYPE

TEMPS

WASH/SPIN LOAD TYPE

SPEEDS

cont.

Regular

Sturdy fabrics needing maximum

Normal/Fast

water extraction like jeans, towels and bedding

Wrinkle Free

Sturdy fabrics needing a slower spin

Normal/Slow

speed to reduce wrinkling, such as dress shirts and dress pants

Delicate

Delicate fabrics needing slower spin

Gentle/Slow

speed because of clothing construction

Handwash

Intermittent slow agitation and soak

Ex. Gentle/Slow

to gently wash the most delicate

(select models) items

Pull Control Dial Out to Start

Select Cycle

To select a cycle, push the control dial IN and turn it to the right (clockwise) until the pointer is at the soil level needed for the wash load.

Regular Cycle

Regular Cycle is used for normal, sturdy fabrics and uses the following settings:

PREWASH (select models): approximately 16 minutes of wash time.

EXTRA HEAVY: approximately 13 minutes of wash time.

HEAVY: approximately 11 minutes of wash time. NORMAL: approximately 8 minutes of wash time. LIGHT: approximately 6 minutes of wash time.

See Laundering Tips for proper washing procedures, stain removal, and special laundering situations.

Using the Controls – Speed Select Models

STEP 5

STEP 6

Wrinkle Free Fabrics/Delicates Cycles

Wrinkle Free Fabrics/Delicates Cycles share the same portion of the control dial. For wrinkle free fabrics, select the cycle and turn the Wash/Spin Speed dial to Wrinkle Free. For delicate loads, select Delicate Wash/Spin Speed.

PREWASH (select models): approximately 14 minutes of wash time.

HEAVY: approximately 13 minutes of wash time. NORMAL: approximately 12 minutes of wash time. LIGHT: approximately 9 minutes of wash time.

HANDWASH (select models): approximately 6

minutes of wash time. Set the Wash/Spin Speed dial to Handwash.

Note

• Do not attempt to turn the control dial counterclockwise. Damage to the timer will result.

Liquid Bleach Dispenser

The dispenser automatically dilutes liquid chlorine bleach before it reaches your wash load. To use, follow these steps:

1. Measure liquid chlorine bleach carefully, following the instructions on the bottle.

2. Add the bleach to the dispenser before adding the load. Avoid splashing or over-filling the dispenser.

Pour liquid chlorine bleach into

bleach dispenser.

Fabric Softener Dispenser

The dispenser automatically releases liquid fabric softener at the proper time during the cycle. To use, follow these steps:

1. Pour a measured amount of fabric softener into the dispenser to fill line only.

2. If fabric softener comes below line, add warm water.

If it is necessary to clean the dispenser:

1. Pull the dispenser off of the top of the agitator.

2. Soak for one hour in sink or container in hot water and dishwashing liquid.

3. Hold hands over top and bottom of dispenser and shake to loosen buildup.

4. Rinse with clean, hot water.

5. Repeat process if necessary.

6. Replace dispenser on agitator.

Do not use dishwashing liquid inside the washer. Oversudsing can occur.

Finger Faucet

(select models)

Provides a flow of water when holding the switch in the “On” position.

Notes

• Never pour undiluted liquid chlorine bleach directly onto the load or into the wash tub. It is a powerful chemical and can cause fabric damage, such as tearing or color loss, if not used properly.

• If you prefer to use color-safe, non-chlorine bleach, pour it into the wash tub with your detergent. Do not pour non-chlorine bleaches into the bleach dispenser.

Special Features

End of Cycle Signal

(select models)

The end of cycle signal will sound once the cycle is completed.

Unbalanced Spin Load Compensator

Your new washer is designed to handle out-of-balance loads without shutting down or interrupting the washing cycle.

For this reason, the cycle will always be completed. If heavier fabrics in such out-of-balance loads should ever contain excessive moisture at the completion of the cycle, redistribute the clothes in the washer and reset the control dial for the final spin period.

Overload Protector

A built-in protector automatically shuts off the washer motor in case of an overload. This can occur if:

• The load being washed is too heavy.

• Too many appliances are plugged into the line operating your washer.

• A low voltage condition exists on the line.

• Lid is opened and closed repeatedly.

The overload protector permits the washer to start again when the motor has cooled to a safe operating temperature.

If the motor stops repeatedly, call your service technician.

Special Features, cont.

Automatic Lint Filtering System

The Lint Filtering System does not require cleaning.

Wash and rinse water is filtered and re-filtered continuously to trap lint shed by most fabrics during the agitation cycle before it can be re-deposited on the wash load. The engineered hole design on the wash basket in conjunction with water flow produced by the agitator, traps lint away from the clothes between the inner wash basket and the outer tub. Lint is automatically flushed from the washer during the spin cycle.

Safety Spin

If for any reason you open the washer lid when the washer is in a spin or extract period, the operation will immediately stop. This is for your personal safety. If your washer does not stop, call your service technician immediately. When the lid is closed, the operation will automatically resume.

Care & Cleaning

1. After washing, leave the lid open until the interior is dry.

2. Check hoses to be sure there are no kinks or knots.

3. Your washer should not be installed where temperatures will go below freezing, as damage to the washer could result.

4. To clean, occasionally wipe exterior with a clean damp sponge or cloth. Do not use polish on plastic parts.

5. Lifetime lubrication is done at the factory, so your washer never needs to be oiled or greased.

Do not lay heavy or sharp objects on top of your washer.

7. The top of the washer should not be used for removing stains from garments. Some stain removers, such as rust remover, will mar the finish.

8. Remove pins, buckles or other sharp objects from clothes to prevent scratching interior parts.

9. Clothes should not be stored in washer.

10. Bleach, detergent, solvents, etc. spilled on the top of your washer that are allowed to remain will remove the glossy finish. Remove all spills with a damp, soft cloth.

11. If you close your home for the winter, have a service technician drain the washer. Unplug cord from electrical outlet and disconnect hoses from faucets.

Cleaning the Interior

Clean the interior of the washer periodically to remove any dirt, soil, odor, mold, mildew or bacteria residue that may remain in the washer as a result of washing clothes. We recommend taking the following steps every 60 to 120 days to clean and freshen your washer interior. The frequency with which the washer should be cleaned and freshened depends on factors such as usage, the amount of dirt, soil or bacteria being run through your washer, or the use of cold water. Failure to follow these instructions may result in unsatisfactory conditions, including unpleasant odor and/or permanent stains on the washer or washload.

To clean and freshen the washer interior:

1. Add a measured amount of chlorine bleach to the bleach dispenser, following package directions.

2. Add 1/4 cup of detergent to the tub.

3. Run the washer through a complete cycle using hot water.

4. Repeat the process if necessary.

For problem laundry solutions (i.e. fabric damage, residue, tangling) and special laundry care procedures, see the enclosed Laundering Tips brochure.

• Plug cord into live electrical outlet.

• Check fuse or reset circuit breaker.

• Turn the control knob to proper cycle and pull knob out to start the washer.

• Turn both faucets on fully.

• Straighten inlet hoses.

• Disconnect hoses and clean screens. Hose filter screens may be plugged.

• Check fuse or reset circuit breaker.

• Make sure the lid is completely closed.

• Turn the control knob to proper cycle and pull knob out to start the washer.

• Close lid and pull knob out to start the washer.

• Pauses are normal. Wait and see if the washer will start again.

• Check fuse or reset circuit breaker.

• Straighten drain hoses. Eliminate kinked hoses. If there is a home drain restriction, call for drain service.

• Close lid and pull knob out to start the washer. For your safety, washer will not spin unless the lid is closed.

• Suds lock – caused by too much suds. Rewash without detergent. Use correct amount of a low-sudsing detergent.

• Unevenly distributed load. Redistribute the load, close the lid and pull knob out. Check for leveling. Be sure water level is acceptable for load size.

• A normal spin speed is recommended for heavy loads like jeans or towels.

• Plug cord into live electrical outlet.

• Check fuse or reset circuit breaker.

• Turn the control knob to proper cycle and pull knob out to start the washer.

• Close lid and pull knob out to start the washer. For your safety, washer will not spin unless lid is closed.

• This may be a pause in the cycle. Wait briefly and it may start.

• Make sure hose connections are tight.

• Make sure end of drain hose is correctly inserted and secured to drain facility.

• Avoid extended soaking – soak for 30 minutes or less.

• Avoid overloading.

• Be sure washer is leveled properly as outlined in installation manual.

• Weak floors can cause vibration and walking.

• Operating sounds will vary depending on agitation speed.

Won’t Fill

Won’t Agitate

Won’t Spin or Drain

Load is Wet

Stops

Leaks Water

Is Noisy

Troubleshooting

• Turn both faucets on fully.

• If equipped with a temperature selector knob, be sure it is set directly on a temperature setting and not between settings.

• Make sure temperature selection is correct.

• If Auto Temperature Control (select models) is selected, cold water may feel warmer than cold water from the tap. (See page 7-8).

• Make sure hoses are connected to correct faucets and inlet connections. Be sure water supply is regulated correctly. Flush water line before filling washer.

• Check the water heater. It should be set to deliver a minimum 120° F (49° C) hot water at the tap. Also check water heater capacity and recovery rate.

• Disconnect hoses and clean screens. Hose filter screens may be plugged.

• Extra Rinse (select models) is selected.

Fills with the Wrong Temperature Water

Cycle Selector Advances Through Off

For further assistance contact Maytag ServicesSM, Maytag Customer Assistance:

U.S. 1-800-688-9900 or Canada 1-800-688-2002.

U.S. Customers using TTY for deaf, hearing impaired or speech impaired, call 1-800-688-2080.

+ 33 hidden pages