Maytag MVWC700VW1, MVWC700VW0, MVWC700VJ1, MVWC700VJ0, MVWC500VW1 Owner’s Manual

WASHER USER INSTRUCTIONS

INSTRUCTIONS D'UTILISATION DE LA LAVEUSE

Table of Contents / Table desmati6res

ASSISTANCE OR SERVICE ......................................................... 1

WASHER SAFETY ....................................................................... 2

WASHER USE ............................................................................. 3

WASHER CARE .......................................................................... 4

TROUBLESHOOTING ............................................................... 5

WARRANTY ............................................................................... 8

Para obtener acceso al manual de uso y cuidado en espaffol, o para obtener informaci6n adicional acerca de su producto, visite:

www.maytag.com.

Tenga listo su mimero de modelo completo. Podr,_ encontrar el mimero de modelo y de serie en la etiqueta ubicada debajo de la tapa de la
lavadora.

Asss:a ;: ewce

If you need assistance or service, first see the "Troubleshooting"
section. Additional help is available by calling our Maytag Services,
I.I_C, at 1-800-688-9900 from anywhere in the U.S.A., visiting our
website at www.maytag.com or write:

Maytag Services, LLC

Attn: CAIR _':_Center

P.O. Box 2370

Cleveland, TN 37320-2370

In Canada, for assistance, installation and service, call
1-800-807-6777, visit our website at www.maytag.ca or write:

Whirlpool Canada LP

Customer Interaction Centre

1901 Minnesota Court

Mississauga, Ontario L5N 3A7

Please include a daytime phone number in your correspondence.

ASSISTANCE OU SERVICE ........................................................ 9

SI_CURITI_ DE LA LAVEUSE .................................................... 10

UTILISATION DE LA LAVEUSE ............................................... 11

ENTRETIEN DE LA LAVEUSE ................................................... 12

DI_PANNAGE .......................................................................... 13

GARANTIE ............................................................................... 16

Keep this book and your sales slip together for future reference.
You must provide proof of purchase or installation date for in-
warranty service.

Write down the following information about your appliance to help
you obtain assistance or service if you ever need it. You will need to
know your complete model number and serial number. You can find
this information on the model and serial number label, located

under the washer lid.

Dealer name

Serial number

Address

Phone number

Model number

Purchase date

Enhance your washer with these premium accessories.

For more high-quality items or to order; call 1-800-901-2042, or visit us at www.maytag.com/accessories.

In Canada, call 1-800-807-6777 or visit us at www.whirlpoolparts.ca.

Part Number Accessory Part Number Accessory

8212656RP 10 ft (3.0 m) Inlet hose, Black EPDM (2 pack) 8212641RP 5 ft (1.5 m) Inlet hose, Black

EPDM (2 pack)

8212638RP 6 ft (1.8 m) Nylon braided inlet hose, space-saving 8212546RP 4 ft (1.2 m) Inlet hose, Black

90 ° elbow, hypro-b[ue steel couplings. (2-pack) EPDM (2 pack)
8212487RP 5 ft (1.5 m) Nylon braided inlet hose. (2-pack) 8212526 Washer drip tray, fits under all
8212637RP 6 ff (1.8 m) Inlet hose, Black EPDM, space-saving 31682 All purpose appliance cleaner

90 ° elbow, hypro-b[ue steel couplings. (2-pack)

W10092796B

Part Number Accessory Part Number Accessory

8212545RP 5 ft (1.5 m) Inlet hose, Red and Blue EPDM. 1903WH Laundry supply storage cart

(2-pack)

This washer does not include inlet water hoses.

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.

This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:

You can be killed or seriously injured if you don't immediately
follow instructions.

You can be killed or seriously injured if you don't follow

instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire, electric shock, or injuryto persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer.
[] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline,
dry-cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or
explode.

[] Do not add gasoline, dry-cleaning solvents, or other

flammable, or explosive substances to the wash water.
These substances give off vapors that could ignite or

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used
for 2 weeks or more. HYDROGEN GAS iS

EXPLOSIVE. ifthe hot water system has not been
used for such a period, before using the washing

machine, turn on all hot water faucets and let the water
flow from each for several minutes. This will release

any accumulated hydrogen gas. As the gas is
flammable, do not smoke or use an open flame during

this time.

SAVE THESE INSTRUCTIONS

Do not allow children to play on or in the washer. Close
supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach into the washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where it will be exposed to

the weather.

[] Do not tamper with controls.
[] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and
have the skills to carry out.

[] See "Electrical Requirements" for grounding instructions.

2

WASHER USE

Fire Hazard

Never place items in the washer that are dampened

with gasoline or other flammable fluids.

No washer can completeJy remove oil.
Do not dry anything that has ever had any type of oil on

it (including cooking oils).
Doing so can result in death, explosion, or fire.

WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before

operating this appliance.

1.

Measure detergent and pour it into the washer. If desired, add
powdered or liquid color safe bleach.

2.

Drop a sorted load of clothes loosely into your washer.

• I....oad evenly to maintain washer balance. Mix large and

small items. Items should move easily through the wash
water.

• Load only to the top of the basket as shown. Overloading
can cause poor cleaning.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.

Do not use an adapter.
Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

Dispensers on Timed Bleach models automatically dispense
bleach at the proper time in the cycle for optima[
performance, ensuring the cleanest and brightest loads.

Style 1

Liquid chlorine

bleach dispenser

(on some models)

Style 2

Dispenser for

7Ymed Bleach models

3.

(OPTIONAl_) Add liquid chlorine bleach.
NOTE: Follow the garment and the chlorine bleach

manufacturers' directions for proper use. Undiluted bleach will
damage any fabric it touches. The damage appears as rips, holes,

tears, or color loss and may not show up until several washings

later. To avoid spilling, use a cup with a pouring spout. Do not
let bleach splash, drip, or run down into the washer basket.

Always measure liquid chlorine bleach. Do not guess. Do not
use more than the manufacturer's recommendedamount for a

full load. Use less with a smaller load size.
Styles 1 and 2: With liquid chlorine bleach dispenser (on some

models)

Use only liquid chlorine bleach in this dispenser. Do not use
this dispenser to add powdered chlorine or color-safe bleach
to your wash load. Pour measured liquid chlorine bleach
into the liquid chlorine bleach dispenser. Bleach is
immediately fed into the washer and is diluted automatically
during the wash part of the cycle.

Style 3: Without liquid chlorine bleach dispenser (on some
models)

• I.et the washer fill and begin agitating the load.

• Add bleach 5 minutes into the wash cycle for best cleaning
and so that bleach can be removed in the rinse cycle. Pour

bleach around the agitator, not directly onto the load to
avoid damaging clothing or other items in the load.

4.

(OPTIONAl.) Add liquid fabric softener.
NOTE: Do not spill or drip any fabric softener onto the clothes.

Undiluted fabric softener can stain fabrics. Always dilute fabric
softener with warm water. Using too much fabric softener can
make some items (diapers and towels) nonabsorbent. If this

aaPdP..ens,do not use it in every load, or use less of it in each

Style1:Withliquidfabricsoftenerdispenser(onsomemodels)

• Useonlyliquidfabricsoftenerinthisdispenser.Pour
measuredliquidfabricsoftenerintothedispenser.Softeneris
addedautomaticallyduringtherinseportionofthecycle.

Diluteliquidfabricsoftenerbyfillingthedispenserwith

warmwateruntilliquidreachestheundersideoftherim.See

maxfilllinearrows.

Style 2: Without liquid fabric softener dispenser (on some
models)

• In the final rinse only, add fabric softener that has been
diluted with 1/2to 1 cup (125 to 250 ml_) warm water.

5°

Close the washer lid. Washer will not agitate or spin with the lid
open.

6.

Turn the I_OAD SIZE or WATER I_EVEI. selector to the correct
setting for your wash load and the type of fabric being washed.

• You may change the load size or water level selection after
the washer has started filling by turning the selector to a
different setting.

• On models with a variable Load Size or Water I_evel control,
you should turn the knob to RESET, then to desired setting.

7°

Select a Wash Temperature based on the type of fabric and soil
being washed. Use the warmest wash water safe for the fabric.

Follow garment label instructions.

The Automatic Temperature Control (ATC) (on some models
electronically senses and maintains a uniform water temperature

by regulating incoming hot and cold water.

• Even in Cool wash, some warm water is let into the washer
to maintain a minimum temperature of approximately 70°F

(21 °C).

Temperature Guide

Wash Temp Suggested Fabrics

Hot Whites and pastels

Durable garments
Heavy soils

Warm Bright colors

Moderate to light soils

Cool Colors that bleed or fade

I.ight soils

Cold Dark colors that bleed or fade

I_ight soils

NOTE: In wash water temperatures colder than 60°F (15.6°C),
detergents do not dissolve well. Soils can be difficult to remove.

Some fabrics can retain wear wrinkles and have increased pilling
(the formation of small lint-like balls on the surface of garments).

8.

You can customize your wash by adding rinse Options to your
cycle selections. This knob has settings for:

• Extra Rinse - Selecting this option provides a second rinse.
An Extra Rinse can be addedto any wash cycle.

• Cycle Signal - A tone will sound at the end of the cycle. The
sound level cannot be adjusted.

• Extra Rinse & Cycle Signal - This option combines both a

Extra Rinse and a Cycle Signal at the end of the wash cycle.

9. The Sensi-Care r_l System (on some models) is an integrated set of
controls which work together to provide optimal wash
temperatures, agitation times, and agitation/spin speeds based

on the Fabric Select setting. The controls provide higher wash
temperatures for more aggressive, heavy-duty cycles and slightly
lower temperatures on cycles for delicate and hand wash items,
to provide better fabric care. The timer knob allows you to

decrease agitation time for light soils and increase agitation time
for heavy soils.

10. Push in the Timer knob and turn it clockwise to the wash cycle
you want. Reduce the wash time when using a small water level
setting. Pull out the Timer knob to start the washer.

To stop or restart your washer:

• To stop the washer at any time, push in the Timer knob.

• To restart the washeb close the lid (if open) and pull out the

Timer knob.

WASHER CARE

Use a soft, damp cloth or sponge to wipe up any spills such as

detergent or bleach from the outside of your washer.
Clean your washer interior by mixing 1 cup (250 ml_) of chlorine

bleach and enough detergent to equal twice the manufacturer's
recommended amount for a normal wash load. Pour this mixture

into your washer and run it through a complete cycle using hot
water. Repeat this process if necessary.

Remove any hard water deposits using only cleaners labeled as

washer safe.
Cleaning the liquid fabric softener dispenser (on some models):

1. Remove dispenser by grasping top with both hands and
squeezing, while pushing upward with thumbs.

2. Rinse dispenser under warm wateb then replace it.

NOTE: Some models are equipped with a liquid fabric softener
dispenser. To avoid damage to the washer or clothing, do not wash
clothes with the liquid fabric softener dispenser removed or add
detergent or bleach to this dispenser; it is for liquid fabric softener
only.

V%s_ .,, °

This washer does not include water inlet hoses. A list of hoses
available for separate purchase from Whirlpool Corporation is

provided on the first page of this user instructions.

Replace water inlet hoses after 5 years of use to reduce the risk of
hose failure. Periodically inspect and replace water inlet hoses if
bulges, kinks, cuts, weab or leaks are found.

When replacing your water inlet hoses, mark the date of
replacement on the label with a permanent marker.

4

Because some water may stay in the hoses, freezing can damage
your washer. If storing or moving your washer during freezing
weather, winterize it.

Winterizing your washer

1. Shut off both water faucets. Disconnect and drain water inlet

hoses. Pour 1 qt (1 I.) of R.V.-type antifreeze into the basket.

2. Run washer on a drain and spin setting for about 30 seconds to
mix the antifreeze and remaining water.

3. Unplug washer or disconnect power.

To use washer again

1. Flush water pipes and hoses. Reconnect water inlet hoses. Turn
on both water faucets.

TROUBLESHOOTING

First try the solutions suggested here or visit our website and reference FAQs (Frequently Asked Questions)

In U.S.A. www.maytag.com/help In Canada www.maytag.ca

to possibly avoid the cost of a service call

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.
Do not remove ground prong.

Do not use an adapter.
Do not use an extension cord.

Failure to follow these instructions can result in death,

fire, or electrical shock.

2. Plug in washer or reconnect power.

3. Run the washer through a complete cycle with 1 cup (250 ml) of
detergent to clean out antifreeze.

Storage, non-use, or vacation care

Operate your washer only when you are at home. If you will be on
vacation or not using your washer for an extended period of time,
you should:

1. Unplug washer or disconnect power.

2. Turn off the water supply to the washer. This helps avoid flooding
(due to a water pressure surge) while you are away.

Noisy

Is the load balanced and the washer level? The wash load
should be balanced and not overloaded. The washer must be

[eve[. The front feet should be properly installed and the nuts

tightened. Reset the rear leveling legs (if needed). See "Starting
Your Washer."

• Did you completely remove the yellow shipping strap with
shipping pins? See "Remove Shipping Materials."

• Are the gears engaging after the drain and before spin, or is the
upper part of agitator clicking during wash? These are normal

washer noises.

Leaking

• Check the following:
Are the fill hoses tight?

Are the fill hose washers properly seated?

• Is the sink or drain clogged? Sink and standpipe must be able to
handle 17 gal. (64 I.) of water per minute.

Is water deflecting off the tub ring or the load? Center the tub
before starting the washer. The wash load should be balanced
and not overloaded. The fill or spray rinses can deflect off the

load. The washer must be [eve[. The front feet should be properly

installed and the nuts tightened. Reset the rear leveling legs (if
needed). See "l_eve[ the Washer."

• Check household plumbing for leaks.

Basket crooked

Was the washer basket pulled forward during loading? Push the
basket to the center before starting wash.

Is the load balanced and the washer level? The wash load
should be balanced and not overloaded. The washer must be

[eve[. The front feet should be properly installed and the nuts

tightened. Reset the rear leveling legs (if needed). See "l.eve[ the
Washer."

• The washer basket moves while washing. This is normal.

Agitator operation

• The top of the agitator is loose, or moves in only one direction.
This is normal.