ASSISTANCE OU SERVICE .............COUVERTURE ARRIÈRE
W10740630B
W10740631B - SP
Designed to use only
HE High Efciency detergents.
Conçue pour l’utilisation d’un
détergent haute efcacité seulement.
WASHER SAFETY
2
WHAT’S NEW UNDER THE LID?
Your new washer will operate differently than your past agitator-style washer.
Lid Lock
To allow for higher spin speeds, the lid will lock and the
Lid Locked light will turn on. When lit, the lid is locked and
cannot be opened. When off, the lid can be opened. After
a cycle is started, water will enter the washer. Lid will be
unlocked during the Sensing Fill and Wash process. If you
need to open the lid to add a garment after this point, you
must press START/Pause and wait for the lid to unlock.
The lid will only unlock after washer movement has
stopped. It may take several seconds to several minutes
for the lid to unlock. Press START/Pause to resume the
cycle.
Sounds
At different stages of the wash cycle, you may hear sounds
and pauses different from those of your previous washer.
For example, you may hear a clicking and hum at the
beginning of the cycle as the lid lock goes through a selftest. There will be different kinds of humming and whirring
sounds as the agitator tests for load balance or moves
the load. Sometimes, you may hear nothing at all as the
washer allows time for clothes to soak.
Automatic Load Size Sensing
Once you start the cycle, the washer will ll to the water
level. When the washer is done lling, it will start to agitate
after it determines the correct level for the load. The
washer will then ll to the appropriate water level based
on the load size.
This low-water wash method uses less water and energy
compared to a traditional agitator-style washer.
IMPORTANT:
■ After the washer basket lls to the selected water level, the lid must be closed before the wash cycle can start.
If lling stops with the lid open, close lid and press START/Pause button.
3
CONTROL PANEL AND FEATURES
2
3
41
5
2
Not all features and options are available on all models.
1
SOIL LEVEL
Select the setting most suitable for your load. For heavily
soiled and sturdy fabrics, select Heavy Soil Level for more
wash time. For lightly soiled and delicate fabrics, select
Light Soil Level for less wash time. A lighter soil-level setting
will help reduce tangling and wrinkling.
2
WASH TEMP
Temperature senses and maintains uniform water
temperatures by regulating incoming hot and cold water.
Select a wash temperature based on the type of fabric
and soils being washed. For best results and following
the garment label instructions, use the warmest wash
water safe for your fabric.
■ On some models and cycles, warm and hot water may
be cooler than your previous washer.
■ Even in a cold and cool water wash, some warm water
may be added to the washer to maintain a minimum
temperature.
7
3
7
Appearance may vary.
5
PRESOAK (Depending on Model)
Use this option to add an extra soak period to any cycle
when washing heavily soiled garments. This option will
alternate between a soak and a gentle agitation.
NOTE: If your washer does not have a presoak/soak option
or cycle, press the Start/Pause button to pause the cycle
after the washer has lled with water. When you have soaked
your items for the desired amount of time, press the Start/
Pause button again to continue the cycle.
6
START/PAUSE BUTTON
Press to start the selected cycle; press again to pause the
cycle and unlock the lid.
NOTE: If the washer is spinning, it may take several
minutes to unlock the lid. Press and hold for 3 seconds
to cancel a cycle.
7
PROGRESS LIGHTS
6
41
6
3
WASH CYCLE KNOB
Use the Wash Cycle knob to select cycles on your washer.
See “Cycle Guide” for detailed descriptions of cycles.
4
EXTRA RINSE
This option can be used to automatically add a second rinse
to most cycles.
4
The Progress Lights show the progress of a cycle.
At each stage of the process, you may notice sounds or
pauses that are different from traditional washers.
SENSING FILL
When the START/Pause button is pressed, the washer
will ll to an initial water level and begin sensing to
determine the load size. The washer will then continue
lling to the appropriate water level based on load size
and proceed to Wash.
If the lid is opened or the START/Pause button is
pressed, the cycle will pause. Closing the lid and/
or pressing the START/Pause button will resume the
cycle. If the cycle remains paused with the lid open for
10 minutes, the washer will pump out the water.
WASH
You will hear the agitator moving the load. The motor
sounds may change at different stages in the cycle.
Wash time is determined by the selected soil level.
RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. You may hear
the motor turning on briey (short hum) to move the
basket while lling.
SPIN
The washer spins the load at increasing speeds for
proper water removal based on the selected cycle.
DONE
Once the cycle is complete, this light will come on.
For best results, remove the load promptly.
LID LOCKED
The Lid Lock feature allows for higher spin
speeds. When the Lid Locked light is lit, the
lid is locked and cannot be opened without
pausing the cycle.When the Lid Locked light
is off, the lid can be opened.
To open the lid after it has been
locked, press START/Pause. The
lid will unlock once the washer
movement has stopped. This may
take several minutes if the load
was spinning at high speed. Press START/Pause while
the lid is closed to resume the cycle.
5
CYCLE GUIDE
For best fabric care, choose the cycle that best ts the load being washed.
Recommended settings for best performance in bold.
Not all cycles and options are available on all models.
Items to wash:Cycle:Wash Temp*:Spin
Sturdy fabrics,
colorfast items,
towels, jeans
Large items such as
sheets, sleeping bags,
small comforters,
jackets, small
washable rugs
Casual and mixed
loads, jeans, towels,
sturdy fabrics
Bright or darkly
colored cottons,
linens, casual and
mixed loads
Swimsuits and items
requiring rinsing
without detergent
Hand-washed
garments or dripping
wet items
No clothes in washerClean
Heavily soiled fabricsSoakHot
*All rinses are cold.
Power
Wash®
Bulky/
Sheets
Deep Water
Wash
Normal Hot
Wrinkle
Control
Hand WashHot
Cold WashColdHighCold water with an additional wash action gently lifts stains
Rinse &
Spin
Drain &
Spin
Washer
with
®
affresh
Hot
Warm
Cool
Cold
Tap Cold
Hot
Warm
Cool
Cold
Tap Cold
Hot
Warm
Cool
Cold
Tap Cold
Warm
Cool
Cold
Tap Cold
Hot
Warm
Cool
Cold
Tap Cold
Warm
Cool
Cold
Tap Cold
Cold Rinse
Only
N/AHighThis cycle uses a spin to shorten drying times for heavy
HotLowUse this cycle every 30 washes to keep the inside of your
Warm
Cool
Cold
Tap Cold
Speed:
Cycle Details:
HighUse this cycle for heavily soiled or sturdy items. Water-level
sensing process may take longer for some items than for
others because they will absorb more water than other fabric
types.
HighUse this cycle to wash large items. The washer will ll with
enough water to wet down the load before the wash portion
of the cycle begins. This cycle uses a higher water level than
other cycles.
HighProvides maximum wash time and action for tough stains
and soils. Use this cycle for heavily soiled or sturdy items.
Water-level sensing process may take longer for some items
than for others because they will absorb more water than
other fabric types.
HighUse this cycle for normally or lightly soiled cottons and
mixed-fabric loads.
LowUse this cycle to wash loads of no-iron fabrics such as sport
shirts, blouses, casual business clothes, permanent press,
and blends.
LowUse this cycle to wash lightly soiled garments indicating
“Machine Washable Silks” or “Gentle” cycle on the care
label. Place small items in mesh garment bags before
washing. This cycle uses a higher, preset water level.
while caring for fabrics. Settings may be adjusted as desired
but must use only cold water settings.
HighCombines a rinse and high-speed spin for loads requiring
an additional rinse cycle or to complete a load after power
interruption. Also use for loads that require rinsing only.
fabrics or special-care items washed by hand. Use this cycle
to drain washer after cancelling a cycle or completing a cycle
after a power failure.
washer fresh and clean. This cycle uses a higher water level.
Use with affresh® Washer Cleaner tablet or liquid chlorine
bleach to thoroughly clean the inside of your washer. This
cycle should not be interrupted. See "Washer Care."
IMPORTANT: Do not place garments or other items in the
washer during this cycle. Use only with an empty wash tub.
No SpinUse this cycle to soak small spots of set-in stains on fabrics.
The washer will use intermittent agitation and soaking. At the
end of the cycle, water will drain but washer will not spin.
6
Loading...
+ 11 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.