Maytag MTF2176HRW, MTF1976HRB, MTF1976HRQ, MTF1976HRW, MTF2176HRB Installation Guide
...
(O LEVELERS) (O HANDLING)
t_/_ REMOVE CRATE
BASE SCREWS &
TRUCK FROM
LEFT SIDE
DO NOT
REMOVE
ALL THE WAY IN
(0 REFRIGERATOR LEVELING)
Re-level the cabinet.
(2) If the cahinet rolls, extend the levelers.
(1) avelthecabinet. Openandclosethedoors,
MOVE THE REFRIGERATOR TO ITS INSIDE LOCATION.
{3) If the doors do not close easily, raise the front of
the cabinet,
• II I_D---_ CRATE
_. BASE
The refrigerator should remain
upright for at least 30 minutes
prior to plugging it in.
(_Q DOOR ADJUSTMENT (IF NEEDED) )
Loosen
screws 5/16.___,_._
- 0R-
!
Loosen 5/16"
t acrGws__
PAD THE
CORNERS
Loosen
5/16"
LOOSEN SCREWS AND SLIDE
_ OL_ DOORS.
FULLY TIGHTEN ALL SCREWS,
TO LOWER
Leveler
TO RAISE
Leveler
t
_16"
LOOSEN SCREWS AND SLIDE
LEFT TO _ DOORS.
°®
SAVE THE DOOR SPACER, DOORS
MAY SETTLE WITH USE.
110926-2
CREMOVING DOORS (IF REQUIRED)_
5/16"
O
REST DOOR ON A
NON-SCRATCHING
SURFACE
• . H
(Do not discard)
N
C
(A) REMOVE
LEFT SCREW
DOOR REVERSAL
WASHER(s)
(Notelocatlons)
(B) SLIDE DOOR AND
HINGE PAST RIGHT
SCREW
BEFORE
OPENDOOR
AND LIFT
REST DOOR ON A
NON-SCRATCHING
SURFACE
)
HANDLES
HINGE
REPLACING DOORS
Replace doors in reverse order of their removal, Align doors using the door
spacer.
5116"
LOWER HINGE
110926-2
Loading...