A Maytag stack washer/dryer gives you
a full-size high-efficiency washer and a full-size
super capacity dryer that fit in the space of
a washer alone. So it’s the perfect choice
where space is at a premium, or when you want
to accommodate more customers without
expanding your facility. But more than saving
space, the Maytag stack washer/dryer can also
save a lot on water, sewer and energy bills.
debit card
ready
Stack washer/dryers
For Your Customers:
• Up to 32% greater capacity than washers with an
agitator for handling bigger loads and bulky items.
• 220 cubic foot per minute airflow dries laundry
quickly and efficiently to keep in sync with washer.
• User-friendly Super Cycle provides option of three
more minutes of wash time, extra rinse or both.
• No hassling with loose change.
For Your Operation:
• Automatic load balancing allows maximum spin
speed to extract more water for less drying time.
• Built-in over-sudsing protection.
• Maytag Computer Trac
®
controls let you adjust
pricing by cycle, day and time.
• Optional two-way data communication.
Models MLE/MLG19PR
Compatible with a variety of
systems for greater flexibility!
In addition to eliminating hassles with
coins, debit card systems greatly reduce
the likelihood of machine vandalism.
What’s more, the debit cards offer
a wealth of opportunities for
promotionally minded owners.
DRYER
Motor:1/4HP, 120 volt, 60 Hz, single phase,
thermoprotected against overload, auto-reset.
Export models 240 volts, 50 Hz and 220 volts,
60 Hz.
Capacity: 6.0 cubic feet (0.17 cu. m).
Airflow: 220 cubic feet (6.2 cu. m) per minute
for the drying chamber. Export models 180
cubic feet (5.0 cu. m) per minute.
Exhaust: Use a minimum of 4 inch ( 10.2 cm)
diameter rigid aluminum or galvanized steel
duct. Never use plastic, non-metal or
combustible duct.
Heating Element (MLE Models):
Nichrome helix coil.
Electrical Rating (MLE Models): 240 volt, AC,
60 Hz, draws approximately 5,900 watts for
the drying chamber (6,300 watts including
washer). Export models draw approximately
4,900 watts.
Fuse Requirements: MLE models – 30 amp.
MLG models – 15 amp.
Single Port Burners (MLG Models):
Automatic electric burner ignition.
Gas Rating (MLG Models):
24,000 BTU/ hr for the drying chamber.
Automatic Pressure Regulator
(MLG Models):
Self-adjusting valve automatically
compensates for variation in gas pressure.
Color: White.
Approximate Weight (Crated/Uncrated):
335 lbs. (152 kg ) /303 lbs. (137 kg).
2 YEARS– All parts.
5 YEARS– Washer motor, wash basket, shaft assembly, bearings, seals and
external cabinet against rust-through, including the shell, top, door and frame.
For a period from the date of original purchase through the times listed above, the designated parts which fail in normal
commercial use will be repaired or replaced free of charge for the part itself, with the owner paying all other costs, including labor,
transportation and customs duty. Chemical damage is excluded from all warranty coverage. See complete warranty for details.
Stainless Steel Wash Basket
Tilted up at a 15° angle for greater
convenience, Maytag premium
quality wash basket is designed
to last a lifetime.
Fast And Efficient Drying
Our 220 cubic foot per minute
diagonal airflow means fast and
efficient drying performance,
even with difficult installations.
Precision Endurance Drive
No transmission to service.
Maytag precision drive system
self-adjusts its speed to adapt
to every installation.
Computer Trac®Controls
Simple to operate. The panel
displays prices, instructions and
more. Once the cycle begins,
it counts down the remaining time.
MAYTAG, One Dependability Square, Newton, Iowa 50208
C O M M E R C I A L
Models MLE/MLG19PR
Quality Features
Maytag Limited Warranty
For model availability outside the U.S. and Canada, contact:
Maytag International, Inc. Phone: 773-714-0100
8700 West Bryn Mawr Fax: 773-714-8180
Chicago, IL 60361
See specific instructions for proper installation.
Specifications are subject to change without notice.
NEW Y ORK CITY
M.E.A.
U
L
®
WASHER
Motor: 120 volt, 50/60 Hz, variable speed,
reversible, high-efficiency, switched reluctance
motor. Develops
1
/4 HP in wash and 1/2 HP in spin.
Capacity: 2.9 cubic feet (0.08 cu.m).
Inlet Hose Length: 4 feet (1.22 m ).
Drain Hose Length: 4 feet (1.22 m ).
Approximate Water Usage: 5 gallons (18.9 liters)
hot water cycle, 2.5 gallons (9.5 liters) warm water
cycle, 18-21 gallons (68.1-79.5 liters) overall.
†
Leveling Legs: Adjustable to level
unit for proper installation.
†
If optional additional rinse is used, add 5 gallons;
not dependent on incoming pressure or time.
CL613 9/99 Printed in U.S.A.
15
/16"
2.4 cm
Gas manifold
connection
383/16"
97 cm
5
/32"
39
99.5 cm
Exit location of
washer drain hose
N
H
T
I
W
E
S
M
E
A
I
L
P
M
O
C
A
N
S
G
I
S
S
O
E
D
C
E
R
34.3 cm
T
A
I
O
N
I
C
R
A
®
T
C
A
I
E
I
T
F
I
Location of terminal block on electric
models and power supply cord on
gas models except for Canada.
3
"
16
/
27
69.1 cm
5"
12.7 cm
1
5
/2"
14 cm
41"
104.1 cm
627/32"
17.4 cm
1
71
3911/32"
79.9 cm
Location of
washer water
valve connections
181.6 cm
3
/8" min.
.95 cm
1
/2"
13
1
/2"
13
34.3 cm
A
L
S
A
F
N
E
T
Y
S
T
A
N
D
A
N
R
O
D
I
S
D
/2"
5
/8"
1.6 cm
Optional
side vent
location
(kit required)
*Additional depth with venting will take from
1
1
of depth depending on the vent method used.
1
27
/2"*
69.9 cm
Dryer
Washer
1
/2"*
27
69.9 cm
/8" to 7" (2.9 cm to 17.9 cm)
3
/4"
1.9 cm
2.9 cm
1
/8"
1
®