Maytag MLG19PNDWW, MLE19PNDYW Dimension Guide
MAYTAG®COMMERCIAL
NEPTUNE®STACK W ASHER/DRYER
CLP658
SAVE SPACE AND CUT
UTILITY COSTS
A Maytag®Commercial Neptune®stack
washer/dryer gives you a full-size
high-efficiency washer and a super-capacity
dryer in the space of a washer alone. Plus,
the ENERGY STAR
®
rating means you’ll
save on utility bills. It’s an instant boost
for your bottom line!
PROGRAMMABLE
CONTROLS
MAKE OPERATION EASY.
THE BEST WARRANTY
IN THE BUSINESS —
5 YEARS ON ALL PARTS.
COMPUTER TRAC®CONTROLS
Maytag®Computer Trac®controls are
easy to program and provide simple
one-touch cycle selection. The panel
displays operating instructions, a
countdown of the cycle time remaining
and more.
FOR YOUR OPERATION:
• No Wash Agitator For Greater Capacity
• Fast-Drying 220 cfm Diagonal Airflow
• Angled Wash Basket For Easy Loading
And Unloading
• Automatic Load Balancing
• Maximum Spin Speed Extracts
More Water
• Built-In Over-Sudsing Protection
• Easy-To-Operate Computer Trac
®
Controls
• Display Shows Time Remaining In Cycle
BUILT-TO-LAST™FEATURES:
• The Best Warranty In The Business
• Stainless Steel Wash Basket
• Precision Endurance Drive
MLE/MLG19PN
PROGRAMMABLE
CONTROLS
MAKE OPERATION EASY.
NEW YORK CITY
M.E.A.
U
L
®
Neptune®Stack
Washer/Dryer
STACKED UNIT SPECIFICATIONS
MODEL MLE/MLG19PN
WASHER SPECIFICATIONS
MOTOR
120V, 50/60 Hz, variable-speed, reversible, high-efficiency, switched reluctance •
HP (kw) —wash/spin .25 (.19)/.5 (.38)
CAPACITY — cu. ft. (cu. m) 2.9 (.08)
INLET HOSE LENGTH — in. (cm) 48 (121.9)
DRAIN HOSE LENGTH — in. (cm) 42 (109.7)
APPROXIMATE WATER USAGE
Hot-water cycle — gal. (liters) 5 (18.9)
Warm-water cycle — gal. (liters) 2.5 (9.5)
Overall — gal. (liters) 18 – 21(68.1 – 79.5)*
DRYER SPECIFICATIONS
MOTOR
120V, 60 Hz, single-phase, thermoprotected against overload, auto-reset •
Export models — 240V, 50 Hz and 220V, 60 Hz •
HP (kw) .25 (.19)
CAPACITY — cu. ft. (cu. m) 6 (.17)
AIRFLOW
Domestic models — cu. ft. per minute (cu. m) per pocket 220 (6.2)
Export models — cu. ft. per minute (cu. m) per pocket 180 (5)
EXHAUST DUCT DIAMETER — in. (cm) 4 (10.2)**
NICHROME HELIX COIL HEATING ELEMENT (MLE models) •
ELECTRICAL REQUIREMENTS
Approximate dryer draw — watts 5,900
Approximate overall draw — watts 6,300
Export models — watts 4,900
FUSE REQUIREMENTS
MLE model — amps 30
MLG model — amps 15
SINGLE-PORT BURNER WITH AUTOMATIC ELECTRIC IGNITION (MLG models) •
GAS RATING PER DRYING CHAMBER (MLG models) — BTU/hr. (kcal/hr.) 24,000 (6,048)
AUTOMATIC PRESSURE REGULATOR (MLG models) •
ADJUSTABLE LEVELING LEGS •
COLOR
White •
APPROXIMATE WEIGHT
Crated/uncrated — lbs. (kg) 335 (152) /303 (137)
* If optional additional rinse is used, add 5 gallons (18.9 liters); not dependent on incoming pressure or time.
** Use a minimum of 4" (10.2 cm) diameter rigid aluminum or rigid galvanized-steel duct. Never use plastic, non-metal
or combustible duct.
See specific instructions for proper installation. Because of continuous product improvement, Maytag reserves the right to change
specifications without notice
.
5 YEARS — ALL PARTS
For a period from the date of original purchase
through the time listed above, the designated parts
that fail in normal commercial use will be repaired
or replaced free of charge for the part itself, with
the owner paying all other costs, including labor,
transportation and customs duty. Chemical
damage is excluded from all warranty coverage.
See complete warranty for details.
1
www.maytagcommerciallaundry.com
Neptune®Stack Washer/Dryer — MICROPROCESSOR CONTROL
†
Additional depth with venting will take from 11⁄8" to 7"
(2.9 cm to 17.9 cm) of depth, depending on the vent
method used.
9/03
/2"
5
(14 cm)
Location of terminal block on electric
models and power supply cord on gas
models, except for Canadian models.
3
27
/16"
(69.1 cm)
5"
(12.7 cm)
1
/2"
13
27
(69.9 cm)
Dryer
Washer
1
27
(69.9 cm)
(104.2 cm)
627/32"
(17.4 cm)
1
†
/2"
†
/2"
41"
3911/32"
(79.9 cm)
Location of
washer water
valve connections
1
/2"
71
(181.6 cm)
3
/8" min.
(.95 cm)
3
/4"
(1.9 cm)
1
/8"
1
(2.9 cm)
(kit required)
15
/16"
(2.4 cm)
Gas manifold
connection
3
/16"
38
(97 cm)
131/2"
(34.3 cm)
5
/32"
39
(99.5 cm)
Exit location of
washer drain hose
5
/8"
(1.6 cm)
(34.3 cm)
Optional
side vent
location
Loading...