Maytag MHWE500VE Dimension Guide
48 in.2*
(310 cm
2
)
3"* (7.6 cm)
3"* (7.6 cm)
1"* (2.5 cm)
24 in.
2
*
155 cm
2
)
6"* (1
76"
(193 cm
1
"
(2.5 cm
5¹⁄₂"**
(14 cm)
A. Side view - closet or conned area
B
.Closet door with vents
A
.Recessed area
B
. Side view - closet or c
Front Loading Washer
6"* (15.2 cm)
7
6"
(193 cm)
2
7"
(
68.6 cm)
1"
(2.5 cm)
1"
(2.5 cm)
5¹⁄₂"**
(14 cm)
1"
(2.5 cm
)
1"
(2.5 cm)
39" min.
(99.0 cm)
27"
(68.6 cm)
48 in.2*
(310 cm
2
)
3"* (7.6 cm)
3"* (7.6 cm)
1"* (2.5 cm)
24 in.
2
*
(155 cm
2
)
6"* (15.2 cm)
76"
(193 cm)
27"
(68.6 cm)
1"
(2.5 cm)
1"
(2.5 cm)
5¹⁄₂"**
(14 cm)
6"* (15.2 cm)
76"
(193 cm)
27"
(68.6 cm)
1"
(2.5 cm)
1"
(2.5 cm)
5¹⁄₂"**
(14 cm)
1"
(2.5 cm
)
1"
(2.5 cm)
39" min.
(99.0 cm)
27"
(68.6 cm)
1
"
(2.5 cm)
DC
30" min.
(76.2 cm)
28" min.
(71 cm)
30" min.
(76.2 cm)
1"
(2.5 cm
)
1"
(2.5 cm)
39" min.
(99.0 cm)
27"
(68.6 cm)
27"
(68.6 cm)
1"
(2.5 cm)
30" min.
(76.2 cm)
28" min.
(71 cm)
1"
(2.5 cm
)
1"
(2.5 cm)
39" min.
(99.0 cm)
27"
(68.6 cm)
48 in.2*
(310 cm
2
)
3"* (7.6 cm)
3"* (7.6 cm)
1"* (2.5 cm)
24 in.
2
*
(155 cm
2
)
6"* (15.2 cm)
7
6"
(193 cm)
2
7"
(
68.6 cm)
1"
(2.5 cm)
1"
(2.5 cm)
5¹⁄₂"**
(14 cm)
1"
(2.5 cm
)
1"
(2.5 cm)
39" min.
(99.0 cm)
27"
(68.6 cm)
PRODUCT MODEL NUMBERS PRODUCT DIMENSIONS
MHWE500V
lectrical:120-volt, 60 Hz, AC-only,
E
5- or 20-amp electrical supply is required. Time-
1
elay fuse or circuit breaker is recommended. It is
d
recommended that a separate circuit serving only
this appliance be provided.
RECESSED AREA AND CLOSET INSTALLATIONS
For closet installation, with a door, the minimum ventilation
openings in the top and bottom of the door are required
(view B). Louvered doors with equivalent air ventilation
openings in the top and bottom are acceptable.
AB
A. Side view — closet or confined area
B. Closet door with vents
UNDERCOUNTER INSTALLATION
Dimensions shown are for the recommended spacing.
Recessed or closet installation
washer on pedestal
Recommended installation spacing for
cabinet installation
For cabinet installation, with a door, the minimum
ventilation openings in the top are required.
A B
A. Recessed area
B. Side view — closet or confined area
Stacked Washer and Dryer The dimesions shown are for recommended spacing.
*Required spacing.
**For venting out the
side, 1" (2.5 cm)
spacing is allowed.
DRAIN SYSTEM OPTIONS
Standpipe drain system - wall or floor (views A & B)
The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The
minimum carry-away capacity can be no less than 17 gal. (64 L) per minute.
The top of the standpipe must be at least 30" (76.2 cm) high and no higher than
96" (2.4 m) from the bottom of
the washer
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
.
AB
Laundry tub drain system (view C)
The laundr
y tub needs a minimum
20 gal. (76 L) capacity. The top of
the laundry tub must be at least
30" (76.2 cm) above the floor.
C
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Floor drain system (view D)
oor drain system requires a siphon break
The fl
that may be purchased separately.
The siphon break must be a minimum of 28"
(71 cm) from the bottom of the washer.
Additional hoses might be needed.
D
Ref. W10176966
07-24-08
Loading...