Maytag MHW5100DW0, MHW5100DC0, MHW3100DW0 Owner’s Manual

se Care ide

ided'utilisation d'entretien

FRONT-LOADINGAUTOMATICWASHER

LAVEUSEDECHARGEiVlENTFRONTAL

W10649235A W10649236A-SP

j Para obtener acceso

al Manual de uso y cuidado

en espai_ol, o para obtener

informaci6n adicional acerca

de su producto, visite:

www.maytag.com

If you have any problems or questions, visit us at www.maytag.com

Pour tout probleme ou question, consulter www.maytag.ca

Designed to use only HE High Efficiency detergents.

Congue pour I'utilisation d'un d_tergent haute efficacit6 seulement.

TABLEOF CONTENTS

WASHERSAFETY..................................................................................2

ACCESSORIES.......................................................................................3

CONTROL PANELAND FEATURES.................................................4

USING THEDISPENSER DRAWER.................................................5

CYCLEGUIDE..........................................................................................6

USING YOURWASHER.......................................................................8

WASHER MAINTENANCE................................................................12

TROUBLESHOOTING........................................................................15

WARRANTY...........................................................................................23

ASSISTANCEOR SERVICE............................................. Back Cover

TABLEDE MATIERES

SECURITEDE LA LAVEUSE.............................................................24

ACCESSOIRES....................................................................................25

TABLEAUDECOMMANDE ETCARACTERISTIQUES............25

UTILISATIONDUTIROIR DU DISTRIBUTEUR...........................27

GUIDE DE PROGRAMMES.............................................................28

UTILISATIONDE LALAVEUSE........................................................30

ENTRETIENDE LALAVEUSE..........................................................34

DEPANNAGE.........................................................................................37

GARANTIE..............................................................................................46

ASSISTANCEOU SERVICE................................. Couverturearriere

WASHER SAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey aii safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean:

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer. [] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline, dry=cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or explode.

[] Do not add gasoline, dry=cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach intothe washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where itwill be exposed to

the weather.

explode.

[] Under certain conditions, hydrogen gas may be

produced ina hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

[] Do not tamper with controls. [] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and have the skills to carry out.

[] See "Electrical Requirements" located in the installation

instructionsfor grounding instructions.

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during this time.

SAVE THESE iNSTRUCTiONS

State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

ACCESSORIES

Customize your new washer and dryer with the following genuine Maytag accessories. For more information on options and ordering, contact your dealer, call us at 1-800-901-2042, or visit: www.maytag.com/accessones.

In Canada, call 1-800-807-6777, or visit: www.maytag.ca.

15" Pedestal Color-matched pedestals raise the washer and

dryer to a more comfortable working height.

The large drawer provides convenient storage.

Stack Kit If space is at a premium, the stack kit allows

the dryer to be installed on top of the washer.

CONTROLPANELAND FEATURES

Not all features and cycles are available on all models. NOTE: The control panel features a sensitive surface that responds

to a light touch of your finger. To ensure your selections are registered, touch the control panel with your finger tip, not your fingernail. When selecting a setting or option, simply touch its name.

Models MHW51 00D and MHW31 00D

POWER/CANCEL

Touch to turn the washer on and off. Touch to stop/cancel a cycle at any time.

NOTE: Turning the Wash Cycle knob will also turn the washer on and off.

WASH CYCLE KNOB

Turnthe knob to select a cycle for your laundry load. An LED will light up for the cycle selected.

NOTE: The Clean Washer with affresh R"LED will flash when the washer has run30 wash cycles as a reminder to run the Clean

Washer with affreshRcycle. See "Cycle Guide" for detailed descriptions of cycles.

START

Touch and hold untilthe lightabove START comes on to start a cycle,or touch once while a cycle isinprocess to pause it. Ifyou want to add a garment, you can touch START when the

"Add a Garment" LED ison.

LED DISPLAY AND SETTINGS

When you select a cycle, its default settings will light up and the Estimated Cycle Time will be displayed (for times longer than 60 minutes, hours will be displayed, followed by minutes). Factors such as load size, wash temperature, and water pressure may affect the time shown in the display during the cycle. Tightly packing garments, unbalanced loads, or excessive suds may cause the washer to adjust the cycle time, as well.

Touch the desired setting along the right of the display to adjust. See "Cycle Guide" for available settings on each cycle. Not all settings are available with all cycles.

Tern peratu re The recommended wash temperature is preset for each cycle.

You may also select a wash temperature based on the type of fabric and soils being washed. For best results, follow the

garment label instructions. All wash temperatures feature a cold rinse.

Soil Level The Soil Level setting (wash time) is preset for each wash

cycle. For most loads, use this preset soil level. When you change the soil setting, the cycle time will increase or decrease in the Estimated Cycle Time display.

For heavily soiled and sturdy fabrics, use the Soil Level setting to select more wash time. For lightly soiled and delicate fabrics, use the Soil Level setting to select less wash time. Lower soil level settings will help reduce tangling and wrinkling.

Spin Speed This washer automatically selects the spin speed based

on the cycle selected. Some preset speeds can be changed.

, Higher spin speeds mean shorter dry times, but may

increase wrinkling in your load.

, Lower spin speeds reduce wrinkling, but will leave

your load more damp.

DELAY START

Use + and - to delay the start of the wash cycle by up

to 9 hours. To turn off Delay Start, use + and - to set the

delay time to "0_' or touch POWER/CANCEL

OPTIONS

Touch to activate additional wash options or additional features on the washer. Not all options are available

on all models. _ Extra Rinse

Activate this option to add an extrarinse to most cycles.

_ Control Lock

Touch and hold for 3 seconds to lock the controls to avoid unwanted changes or operation. Touch and

hold 3 seconds again to unlock. For each second CONTROL LOCK is held down, the display will count down one second: you will see "3;' then "2;' then "1J' You may still touch START to pause the cycle,

or touch POWER/CANCEL to turn off the washer.

CYCLE STATUS LIGHTS

Delay

If a Delay Start is set, the Delay indicator will light and the delay time will count down

in the display. Door Locked Door Locked will light to indicate that

the door is locked and cannot be opened without first pausing or canceling the cycle.

Add a Garment When "Add a Garment" is lit, you may pause

the washer, open the door, and add items. Touch and hold START to start the washer again.

Done Once the cycle is complete, this light will come on.

Remove the load promptly for best results.

J I

____s_ HE detergent

_ Liquid fabric

softener

_ CMorine bleach

DISPENSER DRAWER

The dispenser drawer gives you the convenience of automatically adding HE detergent, liquid chlorine bleach, and liquid fabric softener to the wash load at the proper time. See "Using the Dispenser Drawer" for information on using the dispenser drawer.

_High Efficiency "HE" detergent compartment

This compartment holds liquid or powdered HE detergent for your mainwash cycle.

_ Liquid fabric softener compartment

Automatically dilutes and dispenses liquidfabric softener at the optimum time inthe cycle.

m Use only liquid fabric softener inthis dispenser.

Liquid chlorine bleach compartment

Automatically dilutes and dispenses liquid chlorine bleach at the optimum time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach.

Choosing the Right Detergent

Use only High Efficiency detergents. The package will be marked "HE" or "High Efficiency_' Low-water washing creates excessive sudsing with a non-HE detergent. Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance, it may also result in component failure and, over time, buildup of mold or mildew. HE detergents are low-sudsing and quick-dispersing to produce the right amount of suds for the best performance. They hold soil in suspension so it is not re-deposited onto clean clothes.

Follow the manufacturer's instructions to determine the amount of detergent to use.

USINGTHEDISPENSERDRAWER

1. Open the dispenser drawer.

2. Add laundry products as described in steps 4-6 in the "Using Your Washer" section.

3. Slowly close the dispenser drawer. Make sure it is completely closed.

NOTE: A small amount of water may remain in the dispensers from the previous wash cycle. This is normal.

Adding H E detergent to dispenser

Selector

detergent

compartment

Pour a measured amount of HE detergent into detergent compartment.

For powdered detergent, lift the selector to the high position, For liquid detergent,

push down the selector to the low position. Use on/y High Efficiency

Do not overfill; adding too much detergent (HE) detergent. may cause detergent to be dispensed into

the washer too early.

Powdered detergent: Lift the selector to the high position.

IM PC RTANT:

m Do not add single-dose laundry packet to dispenser drawer, m Use powdered detergent when using the Delay Start option,

Liquid detergent may seep out before the wash begins,

Liquid detergent: Push down the selector to the

low position.

Use only High Efficiency (HE) detergent.

CYCLEGUIDE

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.

NOTES: m Not all cycles, temperatures, and options are available on all models.

m All wash temperature selections feature a cold rinse. m Not all temperatures, spin speeds, or soil levels are labeled on the control panel.

to as-h-

using default

cycle settings:

Normally soiled cottons, linens, sheets, and mixed garment loads

Bright or darkly colored cottons, linens, casual and

mixed loads

Sheer fabrics, lingerie, sweaters, and lightly-

soiled shirts, blouses, trousers, pants, and

skirts

No clothes in washer

Wet load of clothes

Swimwear, items that

need rinsing

Cycle:

Normal

Cold

Wash

Deli cat es

Clean

Washer with

affresh '_

Drain

& Spin

Drain

& Spin

with

Extra Rinse

wash

Temperature:

Hot

Warm

Cold

Hot

Warm

Cold

N/A

Hot

Warm

Cold

Spin

Speed:

Extra High

Med

Extra High

Med

Extra High

Med Low

Extra High

Med

Low

Extra High

Med Low

Soil Available

Leveh Options:

Heavy Extra Rinse

Normal Delay Start

Light

Heavy Extra Rinse

Normal Delay Start

Light

Heavy Extra Rinse

Normal Delay Start

Light

Delay Start

N/A Delay Start

Heavy Delay Start

Normal

Light

This cycle combines medium-

speed tumbling and an extra- high-speed spin. This cycle is designed to provide the most energy efficiency.

This cycle uses a concentrated

detergent solution along with

cold water throughout the cycle to gently lift out stains and care for fabrics.

This cycle combines low-speed

tumbling and low-speed spin for

gentle fabric care and reduced

wrinkling.

Use this cycle every 30 washes

to keep the inside of your

washer fresh and clean. This

cycle uses a higher water

level. Use with affresh '_washer

cleaner tablet or liquid chlorine

bleach to thoroughly clean the

inside of your washer. This cycle

should not be interrupted. See

"Washer Care"

IMPORTANT: Do not place garments or other items in the washer during the Clean Washer with affresh "_cycle. Use this cycle with an empty wash tub.

See "Washer Care" in "Washer

Maintenance"

Use Drain & Spin to remove

excess water from the load. Spin speed can be set to a

lower setting.

Select Drain & Spin; then select

Extra Rinse to add water. The

cycle includes an extra-high-

speed spin. For some fabrics, you may wish to set the spin

speed to a lower setting.

Load Size Recommendations For best results, follow the load size recommendations noted for

each cycle.

Small load: Fill the washer drum with 3-4 items, not more

than 1/4 full.

Medium load: Fill the washer drum up to about 1/2 full.

continued on next page

Large load: Fill the washer drum up to about 3/4 full.

Extra-large load: Fill the washer drum, but make sure clothes

can tumble freely. For best results, avoid packing tightly.

CYCLEGUIDE

NOTES: m Not all cycles, temperatures, and options are available on all models.

m All wash temperature selections feature a cold rinse. m Not all temperatures, spin speeds, or soil levels are labeled on the control panel.

rlternstowash I I

using default I CYCle: Wash I Spin Soi! i Avaulabe CycleDetads:

Cycle settings: = Temperature: Speed: Level: Options: I

Clothing, bedding Sanitize Hot Extra High Heavy Extra Rinse _ This cycle eliminates 99,990/o and towels requiring Med Normal Delay Start _ of the most common

sankization Low Light bacteria found in clothes,

sheets, and towels. The hot wash temperature

ensures sankization. Check recommended wash

temperature of your items.

Bacteria tested were K. pneumonia, R aureginosa,

and S. aureus.

Small loads of

2-4 lightly soiled

garments

Heavily soiled fabrics

Rapid Wash

Power Wash

Hot

Warm

Cold

Hot

Warm

Cold

Extra High

Med Low

Extra High

Med

Low

Heavy

Normal

Light

Heavy

Normal

Light

Extra Rinse Delay Start

Extra Rinse @

Delay Start

For small loads (2-4 items) needed quickly. This cycle

combines high-speed tumbling, a shortened wash time, and

an extra-high-speed spin for reduced drying times.

Use this cycle for extremely soiled garments and household

items that need additional cleaning power.

Load Size Recommendations For best results, follow the load size recommendations noted for

each cycle.

Small load: Fill the washer drum with 3-4 items, not more than1/4 full.

Medium load: Fill the washer drum up to about 1/2 full.

Large load: Fill the washer drum up to about 3/4 full.

Extra-large load: Fill the washer drum, but make sure clothes can tumble freely. For best results, avoid packing tightly.

USINGYOURWASHER

Fire Hazard

Never place items in the washer that are dampened with gasoline or other fiarnmable fluids.

No washer can completely remove oil. Do not dry anything that has ever had any type of oil on

it (including cooking oils). Doing so can result in death, explosion, or fire.

First wash cycle without laundry

Before washing clothes for the first time, if not completed during the final installation step, choose the NORMAL cycle and run it without clothes. Use only HE detergent. Use 1/2 the manufacturer's recommended amount for a medium-size load. This initial cycle serves to ensure the interior is clean before washing clothes.

1, Sort and prepare your laundry

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

Single-dose laundry packet, Oxi-type boosters, color-safe bleach, or fabric softener crystals can be added to the drum prior to

adding laundry. NOTE: Do not add clothes to washer drum prior to adding

laundry products. Always follow manufacturer's instructions.

Sort items by recommended cycle, water temperature, and colorfastness. Separate heavily soiled items from lightly soiled. Separate delicate items from sturdy fabrics. Treat stains promptly and check for colorfastness by testing stain remover products on

an inside seam.

IMPORTANT:

[] Empty pockets. Loose change, buttons, or any small object can

plug pumps and may require a service call.

[] Close zippers, fasten hooks, tie strings and sashes, and remove

non-washable trim and ornaments.

[] Mend rips and tears to avoid further damage to items

during washing.

[] Turn knits inside out to prevent pilling. Separate lint-takers from

lint-givers. Synthetics, knits, and corduroy fabrics will pick up lint

from towels, rugs, and chenille fabrics.

[] Do not dry garments if stains remain after washing, because heat

can set stains into fabric.

[] Always read and follow fabric care labels and laundry

product instructions, improper usage may cause damage

to your garments.

3.Load laundry into washer

Place a load of sorted clothes loosely in the washer, items need to move freely for best cleaning and to reduce wrinkling and tangling. Close the washer door by pushing it firmly until the latch clicks.

[] Depending on load type and cycle, the washer can be fully

loaded, but not tightly packed. Washer door should close easily. See "Cycle Guide" for loading suggestions.

[] Mix large and small items and avoid washing single items. Load

evenly.

[] Wash small items in mesh garment bags. For multiple items, use

more than one bag and fill bags equally.

USING LAUNDRY PRODUCT DISPENSERS

NOTE: Do not add single-dose laundry packets, Oxi-type boosters, color-safe bleach, or fabric softener crystals to dispensers. They will not dispense correctly.

4, Add H E detergent

Uquid "N

Powdered

HE detergent

Adjust the selector, based on type of HE detergent used (either liquid or powdered). See "Using the Dispenser Drawer" instructions on how to use the dispenser.

(if desired)

Add liquid chlorine bleach to dispenser (if desired)

Add liquid chlorine bleach to the bleach compartment. Do not overfill, dilute, or use more than 2/3 cup (165 mL). Do not use color-safe bleach or Oxi in the same cycle with liquid chlorine

bleach. [] Always measure liquid chlorine bleach. Use a measuring cup

with a pour spout; do not guess.

[] Do not fill beyond the "MAX" level. Overfilling could cause

garment damage.

Z Touch POWER/CANCEL to turn on

washer (optional)

Pour a measured amount of liquid fabric softener into liquid fabric softener compartment. Always follow manufacturer's directions for correct amount of fabric softener based on your load size.

Fabric softener is always dispensed in the last rinse, even if Extra Rinse is selected.

IMPORTANT: Do not overfill, dilute, or use more than 1/4 cup (60 mL) of fabric softener. Do not fill past the MAX line. Overfilling dispenser will cause fabric softener to immediately dispense into

washer. [] Do not spill or drip any fabric softener onto the clothes.

[] Do not use liquid fabric softener dispenser balls in this washer.

They will not dispense correctly.

power!cancel

Slowly close the dispenser drawer. Make sure the drawer is closed completely; then touch POWER/CANCEL to turn on the washer or go to Step 8.

USINGYOURWASHER

8, Select CYCLE*

normal

P6werWash cold

rapid de|icates

wash

sanitize

drain

& spin

Turn cycle knob to select your wash cycle. See "Cycle Guide" for details on cycle features.

wash

dean washer

with affTesh

1 0, Select an extra rinse, if desired*

rinse

I extra 1

To add an Extra Rinse to the cycle, touch its name. To remove Extra

Rinse from the selected cycle, touch the name again.

1 1, Setting a delayed start

estimated cycle time

I u + I delay start

The display will show the default settings for the selected cycle. To adjust a setting, touch its name - Temperature, Soil Level, or Spin Speed. Adjusting settings will change the Estimated Cycle Time. Tightly packing the load, unbalanced loads, or excessive suds may also cause the washer to increase the cycle time.

if you do not want to begin a cycle immediately, you may choose the DELAY START option. This will delay the start of the wash cycle by up to 9 hours.

To set a delayed start:

1. Touch DELAY START + and - buttons to set the desired delay time.

2. Touch and hold START to set the delay. The delay countdown has started when the START light stops blinking.

*Not all options and settings are available with all cycles.

See "Cycle Guide" for available options and settings.

1 2, Touch and hold START to begin

wash cycle

hold to start

Touch and hold START to start the wash cycle. To pause a cycle in progress, touch START once, then touch and hold again to continue the cycle. To cancel a cycle, touch

POWER/CANCEL

Once you touch and hold START, you will hear the door lock, unlock, and lock again. The washer door will remain locked during the wash cycle.

Unlocking the door to add garments: If you need to open the door to add 1 or 2

missed garments, you may do so while the "Add a Garment" light is lit.

Touch START once; the door will unlock once the washer movement has stopped,

This may take several minutes. Then close door and touch and hold START again to restart the cycle.

m add a garment

hold to start

1 3. Remove garments promptly

after cycle is finished

between the tub and the washer drum. NOTE: [] A small amount of water may remain in the dispensers after the

wash cycle is complete. This is normal.

[] This washer has a tight seal to avoid water leaks. To avoid odors,

leave the door open to allow the washer to dry between uses.

WASHERMAINTENANCE

WATER iNLET HOSES

Replace inlet hoses after 5 years of use to reduce the risk of hose failure. Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found.

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker.

WASHER CARE

Recommendations to Help Keep Your Washer Clean and Performing at its Best

1. Always use High Efficiency (HE) detergents and follow the HE detergent manufacturer's instructions regarding the

amount of HE detergent to use, Never use more than the recommended amount because that may increase the rate

at which detergent and soil residue accumulate inside your washer, which in turn may result in undesirable odor,

2. Use warm or hot water washes sometimes (not exclusively cold water washes), because they do a better job of controlling

the rate at which soils and detergent accumulate,

3. Always leave the washer door slightly ajar between uses to help dry out the washer and avoid the buildup of

odor-causing residue,

4. Periodically clean residue from the underside of the glass window,

Cleaning Your Front Loading Washer

Read these instructions completely before beginning the routine cleaning processes recommended below. This Washer

Maintenance Procedure should be performed, at a minimum, once per month or every 30 wash cycles, whichever occurs

sooner, to control the rate at which soils and detergent may otherwise accumulate in your washer,

Cleaning the Door Seal

1. Open the washer door and remove any clothing or items from the washer,

2. inspect the colored seal between the door opening and the drum for stained areas or soil buildup. Pull back the seal

to inspect all areas under the seal and to check for foreign objects,

3. if stained areas or soil buildup are found, wipe down these areas of the seal using either of the following two procedures:

a. affresh :"Grit Grabber TM Cloth Procedure:

i, When the cycle is complete, gently pull back the rubber

door seal and clean the entire surface with the rough side of the Grit Grabber TM cloth.

b. Dilute Liquid Chlorine Bleach Procedure:

i, Mix a dilute bleach solution, using 3/4 cup (177 mL) of

liquid chlorine bleach and 1 gallon (3,8 L) of warm tap water,

ii, Wipe the seal area with the dilute solution, using

a damp cloth,

iii, Let stand 5 minutes, iv, Wipe down area thoroughly with a dry cloth and let

washer interior air dry with door open,

IMPORTANT:

[] Wear rubber gloves when cleaning with bleach, [] Refer to the bleach manufacturer's instructions for

proper use,

(_ "_

WASHER CARE (cont.)

Cleaning the Inside of the Washer This washer has a special cycle that uses higher water volumes

in combination with affresh '_ Washer Cleaner or liquid chlorine bleach to thoroughly clean the inside of the washer. Steam

washer models also utilize steam to enhance cleaning in this special cycle,

NOTE: Read these instructions completely before beginning the cleaning process,

Begin procedure

1. Clean Washer with affresh :" Cycle Procedure (Recommended for Best Performance):

a. Open the washer door and remove any clothing or items, b. Add an affresh '_ Washer Cleaner tablet to the washer

drum,

c. Do not add the affresh "_Washer Cleaner tablet to the

dispenser drawer,

d. Do not add any detergent or other chemical to the washer

when following this procedure,

e. Close the washer door, f. Select the Clean Washer with affresh '_ cycle,

g. On some models: Select the Fresh Hold"_/Fresh Spin _

option to help dry the washer interior after the cycle is complete, NOTE: The washer remembers your last option

selection and will use it for future wash cycles until you deselect that option, While the fan is on, the washer door

will lock. To unlock the door, touch POWER/CANCEL.

h. Touch and hold START to begin the cycle, The Clean

Washer with affresh "_Cycle Operation is described below.

2. Chlorine Bleach Procedure:

a. Open the washer door and remove any clothing

or items,

b. Open the dispenser drawer and add liquid chlorine bleach

to the MAX level in both the bleach compartment and the fabric softener compartment. Either traditional or HE

chlorine bleach can be used,

NOTE: Use of more liquid chlorine bleach than is recommended above could cause washer damage over time,

c. Close the washer door and the dispenser drawer, d. Do not add any detergent or other chemicals to the

washer when following this procedure,

e. Close the washer door, f. Select the Clean Washer with affresh '_ cycle,

g. On some models: Select the Fresh Hold"_/Fresh Spin _

option to help dry the washer interior after the cycle is complete, NOTE: The washer remembers your last option

selection and will use it for future wash cycles until you deselect that option, While the fan is on, the washer door

will lock. To unlock the door, touch POWER/CANCEL.

h. Touch and hold START to begin the cycle, The Clean

Washer with affresh "_Cycle Operation is described below.

NOTE: For best results, do not interrupt cycle,

WASHER CARE (cont.)

tf "_

REMOVING THE DISPENSER

Description of Clean Washer with affresh _"Cycle Operation:

1. The Clean Washer with affresh "_cycle will determine whether clothing or other items are in the washer,

2. if no items are detected in the washer, it will proceed with the cycle,

a. if any items are detected in the washer, "rL" (remove load)

will be displayed, The door will unlock. Open washer and remove any garments from the washer drum.

b. Touch POWER/CANCEL to clear the "rL" code, c. Touch and hold START to restart the cycle,

3. Steam Models only: During the first 20 minutes of the cycle, it will activate the steamer but the drum will not spin or fill with water, You may see condensation on the door glass during this initial phase, if you are using an affresh "_Washer Cleaner tablet, it will not dissolve completely during the steam phase, This is normal.

After the cycle is complete, leave the door open slightly to allow for better ventilation and drying of the washer interior,

Cleaning the Dispensers After a period of using your washer, you may find some residue

buildup in the washer's dispensers. To remove residue from the dispensers, remove the drawer and wipe the surfaces with a damp cloth and towel dry either before or after you run the Clean Washer with affresh "_cycle, Use an alPpurpose surface cleaner,

if needed, IMPORTANT: Dispenser is not dishwasher safe,

Cleaning the Outside of the Washer Use a soft, damp cloth or sponge to wipe up any spills.

Occasionally wipe the outside of your washer to help keep it looking new, Use mild soap and water,

IMPORTANT: To avoid damaging the washer's finish, do not use abrasive products,

CLEAN WASHER CYCLE REMINDER

NOTE: Not all models have the Clean Washer with affresh "_ cycle reminder light.

The Clean Washer with affresh "_ _",_"-_--J/JJ LED will flash at the end of a "_l_anwasher

wash cycle when the washer has w_h_ run 30 wash cycles. This is a reminder to run the Clean Washer with affresh '_ cycle.

If the Clean Washer with affresh '_ cycle is not turned on, the LED will stop flashing at the end of a wash cycle after running 3 more regular wash cycles. After 30 more wash cycles are completed, the Clean Washer with affresh '_ LED will again flash at the end of a wash cycle as a reminder.

To remove:

1. Pull dispenser drawer out until it stops.

2. Press down on the release tab and pull straight out to remove the dispenser.

3. Lift off cover panel by pulling straight up.

To replace:

1. Slide cover panel back onto posts on dispenser,

2. Align edges of dispenser with guides in washer, then slide dispenser

back into slot.

WASHERMAINTENANCE

NON=USE AN D VACATION CARE

Operate your washer only when you are home. If moving, or not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer.

2. Turn off water supply to washer to avoid flooding due to water pressure surges.

3. Clean the dispensers. See "Cleaning the Dispensers_'

WINTER STORAGE CARE

IM PORTANT: To avoid damage, install and store washer

where it will not freeze. Because some water may stay in

hoses, freezing can damage washer, If storing or moving during freezing weather, winterize your washer,

To winterize washer:

1. Shut off both water faucets, disconnect and drain water inlet hoses.

2. Put 1 qt. (1 L) of R.V.-type antifreeze in washer drum

and run washer on NORMAL cycle for about 2 minutes to

mix antifreeze and remaining water.

3. Unplug washer or disconnect power.

TRANSPORTING YOUR WASHER

1. Shut off both water faucets. Disconnect and drain water inlet hoses.

2. If washer will be moved during freezing weather, follow WINTER STORAGE CARE directions before moving.

3. Disconnect drain hose from drain system and from back of washer,

4. Unplug power cord,

5. Place inlet hoses and drain hose inside washer drum,

6. Bundle power cord with a rubber band or cable tie to keep it from hanging onto the ground,

iMPORTANT: Call for service to install new transport bolts, Do not reuse transport bolts, Washer must be transported in the

upright position, To avoid structural damage to your washer, it must be properly set up for relocation by a certified technician,

f REINSTALLING/USING WASHER AGAIN "_

To reinstall washer after non-use, vacation, winter storage, or moving:

1. Refer to Installation Instructions to locate, level, and connect washer,

2. Before using again, run washer through the following recommended procedure:

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

2. Plug in washer or reconnect power.

3. Run washer through NORMAL cycle to clean washer and remove antifreeze, if used. Use only HE detergent. Use half the manufacturer's recommended amount for a medium-size

load.

TROUBLESHOOTING

First try the solutions suggested here or visit our webske at www.maytag.com/product_heJp -

In Canada www.maytag.ca for assistance and to possibly avoid a service call.

Once any possible issues are corrected, touch POWER/CANCEL once to clear the code. Reselect and restart the cycle.

"Sd" (Excess suds) Excessive suds in washer. Washer is Allow the washer to continue. Use only H E detergent. Always appears in display running a suds reduction routine, measure detergent, and base detergent quantity on load size.

Jc8followed by _/

(water supply error)

appears in display

Check for proper water supply.

Follow detergent manufacturer's instructions.

Both hoses must be attached and have water flowing to the inlet valve.

Both hot and cold water faucets must be on.

inlet valve screens on washer may be clogged. Remove any kinks in the inlet hose.

Touch POWER/CANCEL once to clear the code. Then touch

POWER/CANCEL again to restart washer. If code appears again, call for service.

Jc9 followed by _/

(drain pump system

error) appears in display

F5 followed by E2 Washer door not locking. Touch POWER/CANCEL to cancel the cycle. Make sure the door (door will not lock) is closed completely and latching. Check for items in the washer

appears in display drum that may be keeping the door from closing completely.

"rL" (remove load) Load detected in drum during Clean Remove items from washer drum and restart Clean Washer with

appears in display Washer with affresh _-_cycle, affresh _-_cycle.

Washer making error Door has not been opened and closed This code may appear when the washer is first turned on.

beeps for at least 3 cycles. Open and close the door to clear the display.

Washer beeps when Door not closed. Close the door completely. START is touched

F# E# code other System error code. Touch POWER/CANCEL once to clear the code. Then touch than as described above POWER/CANCEL again to restart washer. If code appears again,

appears in display call for service.

"nt" (interrupted) The cycle was paused or cancelled. The washer can take 20 to 30 minutes to stop spinning and drain appears in display and will display this error code during that time. Touch POWER/

Check plumbing for correct drain hose installation. Drain hose extends into

standpipe farther than 41/2'' (114 mm).

Not using HE detergent or using too much HE detergent.

Check drain hose for proper installation. Make sure the drain hose is not kinked, pinched, or blocked. Remove any clogs from drain hose. Use drain hose form and securely attach to drainpipe or tub.

Lower drain hose if the end is higher than 96" (2.4 m) above the floor.

Use only HE detergent. Always measure detergent and follow manufacturer's directions based on load size and soil level.

CANCEL once to clear the code. Then touch POWER/CANCEL again to restart washer.

Clean Washer LED flashing at end of wash

cycle

The washer has run 30 wash cycles and

is indicating a reminder to run the Clean

Washer with affresh 'Rjcycle.

Run the Clean Washer with affresh '-_cycle, if the Clean Washer with affresh 'Rjcycle is not turned on, the LED will stop flashing at the end of a wash cycle after running 3 more regular wash cycles. After 30 more wash cycles are completed, the Clean Washer LED will again

flash at the end of a wash cycle as a reminder.

+ 33 hidden pages