Maytag MHW4200BW2, MHW4200BW1, MHW4200BW0, MHW4200BG2, MHW4200BG1 Owner’s Manual

...

Care ide

ide

d'utilisationet d'entretien

FRONT-LOADINGAUTOMATICWASHER LAVEUSEAUTOiViATIQUEDECHARGEMENTFRONTAL

W10441130D W10441131D - SP

If you have any problems or questions, visit us at www.maytag.com

Pour tout probleme ou question, consulter www.maytag.ca

Designed to use only HE High Efficiency detergents.

Con_ue pour rutilisation d'un d_tergent haute efficacit6 seulement.

_ ertified to Reduce Allergens

Homologue pour reduire la presence d'allergenes

Dara obtener acceso

al Manual de uso y cuidado

en espafiol, o para obtener

informaci6n adicional acerca

de su producto visite:

www.maytag.com

TABLEOFCONTENTS

WASHERSAFETY...................................................................................2

ACCESSORIES........................................................................................3

CONTROL PANELAND FEATURES..................................................4

USINGTHE DISPENSERDRAWER...................................................6

CYCLEGUIDE..........................................................................................7

USINGYOURWASHER........................................................................9

WASHERMAINTENANCE.................................................................13

TROUBLESHOOTING.........................................................................16

WARRANTY............................................................................................23

ASSISTANCEORSERVICE.............................................BackCover

TABLEDE MATIERES

SECURITEDE LALAVEUSE..............................................................24

ACCESSOIRES.....................................................................................25

TABLEAUDECOMMANDE ETCARACTERISTIQUES.............26

UTILISATIONDU TIROIRDU DISTRIBUTEUR..............................29

GUIDEDE PROGRAMMES...............................................................29

UTILISATIONDE LA LAVEUSE.........................................................32

ENTRETIENDE LA LAVEUSE............................................................36

DEPANNAGE ......................................................................................... 39

GARANTIE..............................................................................................47

ASSISTANCEOU SERVICE.................................. Couverturearri_re

WASHERSAFETY

Your safety and the safety of others are very important.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages.

This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING." These words mean:

You can be killed or seriously injured if you don't immediately follow instructions.

You can be killed or seriously injured if you don't

follow instructions.

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.

iMPORTANT SAFETY iNSTRUCTiONS

WARNING: To reduce the risk of fire, electric shock, or injury to persons when using the washer, follow basic precautions,

including the following:

[] Read all instructions before using the washer. [] Do not wash articles that have been previously cleaned

in, washed in, soaked in, or spotted with gasoline, dry=cleaning solvents, other flammable, or explosive

substances as they give off vapors that could ignite or explode.

[] Do not add gasoline, dry=cleaning solvents, or other

flammable, or explosive substances to the wash water.

These substances give off vapors that could ignite or

Do not allow children to play on or in the washer. Close supervision of children is necessary when the washer is used

near children.

Before the washer is removed from service or discarded,

remove the door or lid.

[] Do not reach intothe washer if the drum, tub or agitator is

moving.

[] Do not install or store the washer where itwill be exposed to

the weather.

explode.

[] Under certain conditions, hydrogen gas may be

produced in a hot water system that has not been used

for 2 weeks or more. HYDROGEN GAS IS

EXPLOSIVE. If the hot water system has not been used for such a period, before using the washing machine, turn on all hot water faucets and let the water

flow from each for several minutes. This will release

[] Do not tamper with controls. [] Do not repair or replace any part of the washer or attempt any

servicing unless specifically recommended in this manual or in

published user-repair instructions that you understand and have the skills to carry out.

[] See "Electrical Requirements" located in the installation

instructionsfor grounding instructions.

any accumulated hydrogen gas. As the gas is

flammable, do not smoke or use an open flame during this time.

SAVE THESE iNSTRUCTiONS

State of California Proposition 65 Warnings: WARNING: This product contains one or more chemicals known to the State of California to cause cancer.

WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive harm.

ACCESSORIES

Customize your new washer and dryer with the following genuine Maytag accessories. For more information on options and ordering, contact your dealer, call us at 1-800=901-2042, or visit: www.maytag.com/accessories.

In Canada, call 1-800=807-6777, or visit: www.maytag.ca.

15" Pedestal

Color-matched pedestals raise the washer and dryer to a more comfortable working height. The large drawer provides convenient

storage.

Worksurface The worksurface bridges the

washer and dryer, and provides a convenient working and storage

area.

Stack Kit

If space is at a premium, the stack kit allows the dryer to be installed on top of

the washer.

CONTROLPANELAND FEATURES

Not all features and cycles are available on all models.

NOTE: The control panel features a sensitive surface that responds to a light touch of your finger. To ensure your selections are registered, touch the control panel with your finger tip, not your fingernail. When

selecting a setting or option, simply touch its name.

Model MHW4200

0 POWER/CANCEL

Touch to turn the washer on and off. Touch to stop/cancel a cycle at any time.

WASH CYCLE KNOB

Use your Wash Cycle knob to select available cycles on your washer. Turn the knob to select a cycle for your laundry load. An LED will light up for the cycle selected.

NOTE: The Clean Washer LED will flash when the washer has run 30 wash cycles as a reminder to run the Clean Washer cycle.

See "Cycle Guide" for detailed descriptions of cycles.

START

Touch and hold until the light above START comes on to start a cycle, or touch once while a cycle is in process to pause it. If you want to add a garment, you can touch START when the

"Add a Garment" LED is on.

LED DISPLAY AND SETTINGS

When you select a cycle, its default settings will light up and the Estimated Cycle Time will be displayed. Factors such as load size, wash temperature, and water pressure may affect the time shown in the display during the cycle. Tightly packing garments, unbalanced loads, or excessive suds may cause the washer to adjust the cycle time, as well.

Touch the desired option along the right of the display to adjust settings. See "Cycle Guide" for available settings on each cycle. Not all settings are available with all cycles.

Tern pe ratu re The recommended wash temperature is preset for each cycle. You may also select a wash temperature based on the type of fabric and soils being washed. For best results, follow the garment label instructions. All wash temperatures feature a

cold rinse. Soil Level

The Soil Level setting (wash time) is preset for each wash cycle. For most loads, use this preset soil level. When you change the soil setting, the cycle time will increase or decrease in the Estimated Cycle Time display.

For heavily soiled and sturdy fabrics, use the Soil Level setting to select more wash time. For lightly soiled and delicate fabrics, use the Soil Level setting to select less wash time. Lower soil level settings will help reduce tangling and wrinkling.

Spin Speed This washer automatically selects the spin speed based on the cycle selected. Some preset speeds can be changed.

[] Higher spin speeds mean shorter dry times, but may

increase wrinkling in your load.

[] Lower spin speeds reduce wrinkling, but will leave

your load more damp.

DELAY START

Use + and - to delay the start of the wash cycle by up to 12 hours. To turn off Delay Start, use + and - to set the delay

time to "0," or touch POWER/CANCEL

CYCLE STATUS LIGHTS

For details, see "Cycle Status Lights".

OPTIONS

Touch to activate additional wash options or additional features on the washer. Not all options areavailable on all models.

_ Steam for Stains

The Steam for Stains option adds additional soak and wash time to many cycles to help remove tough stains, as well

as a steam boost for added cleaning power. An integrated heater helps to maintain optimal wash temperatures. See

the "Cycle Guide" for cycles that allow the Steam for Stains option.

_ Extra Rinse

Activate this option to add anextra rinse to most cycles. NOTE:Some cycles include this feature as a default.

See "Cycle Guide"for details.

_ resh Spin" Option

The Fresh Spin T''option will periodically tumble the load after the end of the cycle for up to 6 hours to reduce humidity.

To turn on the Fresh Spin 'Moption, touch Fresh Spin.

If, however, the Fresh Spin TM option is turned on, it will stay on for all future cycles until turned back off - the washer

remembers the last on/off status set. To turn off the Fresh Spin 'Moption, touch Fresh Spin.

You may also activate the Fresh Spin 'Moption without running a cycle by touching and holding POWER/CANCEL for one

second, then touching and holding Fresh Spin for 3 seconds, then touching and holding START for 3 seconds.

To turn off the Fresh Spin TM option when it is running, touch

POWER/CANCEL

NOTE: The door will lock while the Fresh Spin TM option is

active. To cancel the option and unlock the door, touch

POWER/CANCEL

_ ycle Signal

Use this option to turn on or off the signal that sounds at end of cycle.

To turn off the tones that sound when a setting is touched: Touch and hold CYCLE SIGNAL for about 3 seconds.

Repeat to turn them on.

_ ontrol Lock

Touch and hold for 3 seconds to lock the controls to avoid

unwanted changes or operation. Touch and hold 3 seconds

again to unlock. You can still touch START to pause the cycle,

or touch POWER/CANCEL to turn the washer off.

J I

)___---__ HE detergent

_ Liquid fabric

softener

_ Chlorine bleach

DISPENSER DRAWER

The dispenser drawer gives you the convenience of automatically adding HE detergent, liquid chlorine bleach, and liquid fabric softener to the wash load at the proper time. See "Using the Dispenser Drawer" for information on using the dispenser drawer.

High Efficiency "HE" detergent compartment This compartment holds liquid or powdered HE detergent for

your main wash cycle.

_ iquid fabric softener compartment

Automatically dilutes and dispenses liquid fabric softener at the optimum time in the cycle.

[] Use only liquid fabric softener in this dispenser. Liquid chlorine bleach compartment

Automatically dilutes and dispenses liquid chlorine bleach at the optimum time during the first rinse after the wash cycle. This compartment cannot dilute powdered bleach.

Choosing the Right Detergent

Use only High Efficiency detergents. The package will be marked

"HE" or "High Efficiency." Low-water washing creates excessive sudsing with a non-HE detergent. Using non-HE detergent will likely result in longer cycle times and reduced rinsing performance. It may also result in component failure and, over time, buildup of mold or mildew. HE detergents are low-sudsing and quick-dispersing to produce the right amount of suds for the best performance. They hold soil in suspension so it is not re-deposked onto clean clothes.

Follow the manufacturer's instructions to determine the amount of detergent to use.

Use only High Efficiency (HE) detergent.

Cycle Status Lights

Delay

If a Delay Start is set, the Delay indicator will light

and the delay time will count down in the display.

Door Locked

Door Locked will light to indicate that the door is locked and cannot be opened without first

pausing or canceling the cycle.

Sensing

When START is touched and held, the washer will first perform a self-test on the door lock mechanism and the sensing light will come on.

You will hear a click, the drum will make a partial turn, and the door will unlock briefly before locking again.

Once the door has locked the second time, the washer will drain to calibrate the sensors; then it will begin tumbling and adding

water. The sensing process will continue throughout the cycle. You may also hear water flowing through the dispenser, adding

detergent to the load. After the load size is sensed, the estimated time based on load

size will be displayed. The actual cycle time may be lengthened; however, the display will continue to show the estimated time.

The sensing light will blink once a second at various times during the cycle, such as when the washer is reducing extra suds.

Add a Garment

When "Add a Garment" is lit, you may pause the washer, open the door, and add items.

Steaming

This will light to show that the cycle is using a steam boost for added cleaning power.

Done

Once the cycle is complete, this light will come on. Remove the load promptly for best results. The Done indicator is also lit during

Fresh Spin T`'option.

USINGTHEDISPENSERDRAWER

1. Open the dispenser drawer.

2. Add laundry products as described in steps 4-6 in the "Using Your Washer" section.

3. Slowly close the dispenser drawer. Make sure it is compJetely closed.

NOTE: A smalJ amount of water may remain in the dispensers from the previous wash cycle. This is normal.

HE detergent to dispenser

Selector

',HE detergent

compartment

Pour a measured amount of HE detergent into detergent compartment.

For powdered detergent, lift the selector to the high position. For liquid detergent, push down the selector to the low position.

Use only High Efficiency

(HE) detergent,

Selector._. i_ i'-. J'>-'- _,_

Powdered detergent: Lift the selector to the high

position.

Do not overfill; adding too much detergent may cause detergent to be dispensed into the washer too early.

IMPORTANT:

III Do not add single-dose laundry packet to dispenser drawer. III Use powdered detergent when using the Delay Start option.

Liquid detergent may seep out before the wash begins.

Liquid detergent: Push down the selector to the

low position.

CYCLEGUIDE

Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle, options, and settings that best fit the load being washed. Not all settings are available with each cycle, and some options cannot be used together.

NOTES:

m Not all cycles, temperatures, options, or spin speeds are available on all models. m All wash temperature selections feature a cold rinse. m Not all temperatures, spin speeds, or soil levels are labeled on the control panel.

_ Items to wash I

using default I _cle: _ Wash, Spin Soil Available I Cycle Details:

cycle settings: lempera_ure: Speed: Level: Options: '

Normally soiled cottons, Normal Extra Hot Extra High Extra Heavy Steam for Stains* _ This cycle combines medium-speed linens, sheets, and Hot Med Med Fresh Spin TM _ tumbling and an extra-high-speed

mixed garment loads Warm Light Extra Rinse spin. This cycle is designed to

Cool Delay Start provide the most energy efficiency. Cold

Bright or darkly colored cottons, linens, casual and mixed loads

Lightly soiled shirts, blouses, trousers, pants

and dresses

Sheer fabrics, lingerie, sweaters, and lightly-

soiled shirts, blouses, trousers, pants, and

skirts

Normaly soiled sheets, pillowcases, light blankets, or throws

Small loads of 3-4 lightly soiled

garments

No clothes in washer

Cold Cold Extra High Extra Heavy Fresh Spin TM _ This cycle uses a concentrated

Wash Med Med Extra Rinse _ detergent solution along with cold

Wrinkle Extra Hot Extra High Extra Heavy Steam for Stains* _ This cycle combines low-speed Control Hot Med Med Fresh Spin TM _ tumbling and medium-speed spin

Delicates Extra Hot Extra High Extra Heavy Steam for Stains* This cycle combines low-speed

Bedding Extra Hot Extra High Extra Heavy Steam for Stains* _ The wash action of this cycle is

Rapid Wash Extra Hot Extra High Extra Heavy Steam for Stains* _ For small loads (3-4 items) needed

Clean Use this cycle every 30 washes to

Washer keep the inside of your washer fresh

with and clean. This cycle uses a higher

affresh ce water level. Use with affresh cewasher

Warm Low Light Extra Rinse for gentle fabric care and reduced

Cool Delay Start wrinkling. Cold

Hot Med Med Fresh Spin TM tumbling and low-speed spin for

Warm Low Light Extra Rinse gentle fabric care and reduced

Cool Delay Start wrinkling. Cold

Hot Med Med Fresh Spin TM _ designed to keep large items from

Warm Low Light Extra Rinse tangling and bailing up.

Cool Delay Start Cold

Hot Med Med Fresh Spin TM _ quickly. This cycle combines high-

Warm Low Light Extra Rinse speed tumbling, a shortened wash

Cool Delay Start time, and an extra-high-speed spin Cold for reduced drying times.

Light Delay Start water throughout the cycle to gently

lift out stains and care for fabrics.

cleaner tablet or liquid chlorine bleach to thoroughly clean the inside

of your washer. This cycle should not be interrupted. See "Washer Care."

IMPORTANT: Do not place garments or other items in the washer during

the Clean Washer with affresh c_

cycle. Use this cycle with an empty wash tub. See "Washer Care" in

"Washer Maintenance."

* Steam for Stains option is only available when warm, hot, or extra hot water temperature is selected.

Load Size Recommendations

For best results, follow the load size recommendations noted for each cycle,

Small load: Fill the washer drum with 3-4 items, not than

1/4 full,

_ Medium load: Fill the washer drum to about 1/2 full,

Large load: Fill the washer drum up to about 3/4 full.

Extra-large load: Fill the washer drum, but make sure clothes can tumble freely. For best results, avoid packing tightly.

continued on next page

CYCLEGUIDE

NOTES:

III Not all cycles, temperatures, options, or spin speeds are available on all models. II All wash temperature selections feature a cold rinse. III Not all temperatures, spin speeds, or soil levels are labeled on the control panel.

r Items to wash

using default Cycle: Wash

cycle settings: Temperature:

Wet load of clothes Drain N/A

Swimwear, items that Drain Extra Hot need rinsing & Spin Hot

Clothing, bedding Sanitize t Extra Hot and towels requiring

sanifizafion

Sturdy garments Allergen tt Extra Hot Extra High Extra Heavy Steam for Stains* and household items

exposed to possible allergens

Heavily soiled fabrics

* Steam for Stains option is only available when warm, hot, or extra hot water temperature is selected.

&Spin

with Warm

Extra Rinse Cool

..... =.......

Power Wash

Cold

Hot Med Med Fresh Spin TM

Extra Hot

Hot

Warm

Cool Cold

Speed: Level:

Extra High N/A Fresh Spin TM

Med Delay Start Low

Extra High

Med Low

Extra High

Med Low

Extra High

Med Low

Extra Heavy

Med

Light

Extra Heavy Steam for Stains*

Med Fresh Spin TM

Light Extra Rinse

Extra Heavy

Med Light

Available Cycle Details:

I Options:

Fresh Spin TM @Delay Start

Delay Start

Steam for Stains*

Fresh Spin TM

Extra Rinse Delay Start

Use Drain & Spin to remove excess

water from the load. Spin speed can be set to a lower setting.

Select Drain & Spin; then select

Extra Rinse to add water. The

cycle includes an extra-high-speed spin. For some fabrics, you may

wish to set the spin speed to a lower setting.

Using the highest wash temperature

available ensures sanitizafion. Check recommended wash temperature of your items.

Uses more water to flush out

allergens such as dust mites and pet dander from normally-

soiled items.

Use this cycle for extremely soiled

garments and household items that need additional cleaning power. This cycle combines high-speed wash

action, extra-high-speed spin, and a deep rinse to flush excess dirt from the load.

t- Sanitize

II This washer has a Sanitize Cycle that eliminates 99.90/0 of bacteria typically found on clothing, bedding, and towels, based on independent,

third-party laboratory testing. There is no carryover of bacteria between loads after the cycle is complete.

II Use the Sanitize Cycle to clean heavily soiled, colorfast fabrics. This combines an extra-hot water temperature to help ensure the removal

of heavy soils and stains. It is recommended that you set your hot water heater to 1 20°F (49°C) to ensure proper performance during this cycle.

Allergen cycle certified by NSF International, an independent, third party testing and certification organization. The certification verified that this cycle reduced tested allergens by at least 95.00/0 and maintained the water temperature necessary to kill dust mites. Only the allergen cycle

1-1- Allergen

has been designed to meet the requirements of NSF Protocol P351 for Allergen Reduction Performance effectiveness. It is recommended that

you set your hot water heater to 120°F (49°C) to ensure proper performance during this cycle.

USINGYOURWASHER

Fire Hazard

Never place items in the washer that are dampened with gasoline or other flammable fluids.

No washer can completely remove oil. Do not dry anything that has ever had any type of oil on

it (including cooking oils). Doing so can result in death, explosion, or fire.

First wash cycle without laundry

Before washing clothes for the first time, if not completed during the final installation step, choose the NORMAL cycle and run it without clothes. Use only HE detergent. Use 1/2 the manufacturer's recommended amount for a medium-size load. This initial cycle serves to ensure the interior is clean before washing clothes.

1, Sort and prepare your laundry

Electrical Shock Hazard

Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in death, fire, or electrical shock.

F2, Add laundry products (if desired)

Single-dose laundry packet, Oxi-type boosters, color-safe bleach, or fabric softener crystals can be added to the drum prior to adding laundry.

NOTE: Do not add clothes to washer drum prior to adding

laundry products. Always follow manufacturer's instructions.

Sort items by recommended cycle, water temperature, and colorfastness. Separate heavily soiled items from lightly soiled. Separate delicate items from sturdy fabrics. Treat stains promptly and check for colorfastness by testing stain remover products on

an inside seam.

iMPORTANT:

[] Empty pockets. Loose change, buttons, or any small object can

plug pumps and may require a service call.

[] Close zippers, fasten hooks, tie strings and sashes, and remove

non-washable trim and ornaments.

[] Mend rips and tears to avoid further damage to items during

washing.

[] Turn knits inside out to prevent pilling. Separate lint-takers from

lint-givers. Synthetics, knits, and corduroy fabrics will pick up lint from towels, rugs, and chenille fabrics.

[] Do not dry garments if stains remain after washing, because heat

can set stains into fabric.

[] Always read and follow fabric care labels and laundry

product instructions. Improper usage may cause damage to your garments.

3,Load laundry into washer

Place a load of sorted clothes loosely in the washer, items need to move freely for best cleaning and to reduce wrinkling and tangling. Close the washer door by pushing it firmly until the latch clicks.

[] Depending on load type and cycle, the washer can be fully

loaded, but not tightly packed. Washer door should close easily. See "Cycle Guide" for loading suggestions.

[] Mix large and small items and avoid washing single items. Load

evenly.

[] Wash small items in mesh garment bags. For multiple items, use

more than one bag and fill bags equally.

USINGYOURWASHER

USING LAUNDRY PRODUCT DISPENSERS

NOTE: Do not add single-dose laundry packets, Oxi-type boosters, color-safe bleach, or fabric softener crystals to dispensers, They will not dispense correctly,

4, Add HE detergent

Adjust the selector, based on type of HE detergent used (either liquid or powdered). See "Using the Dispenser Drawer" instructions on how to use the dispenser,

(if desired)

Add liquid chlorine bleach to dispenser (if desired)

Add liquid chlorine bleach to the bleach compartment. Do not overfill, dilute, or use more than 2/3 cup (165 mL). Do not use color-safe bleach or Oxi in the same cycle with liquid chlorine bleach.

[] Always measure liquid chlorine bleach. Use a measuring cup with

a pour spout; do not guess.

[] Do not fill beyond the "MAX" level. Overfilling could cause

garment damage.

7, Touch POWER/CANCEL to turn on

washer (optional)

Pour a measured amount of liquid fabric softener into liquid fabric softener compartment. Always follow manufacturer's directions for correct amount of fabric softener based on your load size.

Fabric softener is always dispensed in the last rinse, even if Extra Rinse is selected.

IMPORTANT: Do not overfill, dilute, or use more than 1/4 cup (60 mL) of fabric softener. Do not fill past the MAX line. Overfilling dispenser will cause fabric softener to immediately dispense into

washer. [] Do not spill or drip any fabric softener onto the clothes.

[] Do not use liquid fabric softener dispenser balls in this washer.

They will not dispense correctly.

power/cancel

Slowly close the dispenser drawer. Make sure the drawer is closed completely, then touch POWER/CANCEL to turn on the washer or go to Step 8,

8, Select CYCLE*

1 0. Select any additional options*

normal

cold

wash

wrinkle

P_w_WaSh

beddin;

control

a[[ergen

sanitize

drain

&spin

de[icates

rapid

wash

cleanwasher

w_tha_

Turn cycle knob to select your wash cycle. See "Cycle Guide" for details on cycle features.

9, Adjust settings, if desired*

extra

_1 cold warm

so([[eve[ u _

I I Ught heavy

m u i

extra

hot

steam for stains

extra

rinse

fresh spin

cyde

signa_

To add an option to the cycle, touch its name - Steam for Stains,

Extra Rinse, Fresh Spin, or Cycle Signal. To remove an option from the selected cycle, touch the option again.

I I, Setting a delayed start

estimated cycle time

I _ + ) delaystart

extra

spin speed g !.

I I low high

The display will show the default settings for the selected cycle. To adjust a setting, touch its name - Temperature, Soil Level, or Spin Speed. Adjusting settings will change the Estimated Cycle Time. Tightly packing the load, unbalanced loads, or excessive suds may also cause the washer to increase the cycle time.

;;i

If you do not want to begin a cycle immediately, you may choose the DELAY START option. This will delay the start of the wash cycle by up to 12 hours.

To set a delayed start:

1. Touch DELAY START + and - to set the desired delay time,

2. Touch and hold START to set the delay, The delay countdown

has started when the START light stops blinking,

*Not all options and settings are available with all cycles.

See "Cycle Guide" for available options and settings.

USINGYOURWASHER

1 2, Touch and hold START to begin

wash cycle

hold to start

Touch and hold START to start the wash cycle, To pause a cycle in progress, touch START once, then touch and hold again to continue the cycle, To cancel a cycle, touch

POWER/CANCEL, Once you touch and hold START, you will hear the door lock,

unlock, and lock again, The washer door will remain locked during the wash cycle,

Unlocking the door to add garments: ifyou need to open the door to add 1 or 2

missed garments, you may do so while the "Add a Garment" light is lit,

Touch START once; the door will unlock once the washer movement has stopped.

This may take several minutes. Then close door and touch and hold START again to restart the cycle.

== add a garment

hold to start

13, Remove garments promptly

after cycle is finished

between the tub and the washer drum.

if you will be unable to remove the load promptly, [ ,, fres_-----_ Spin TM option will tumble the load periodically for

use the Fresh Spin" option. If selected, the Fresh [ I - spin I up to 6 hours. To turn off the Fresh Spin TM option,

touch POWER/CANCEL. To set the washer so that the Fresh Spin TM option does not come on for future cycles, touch Fresh Spin.

NOTE: [] The door will remain locked while the Fresh Spin TM option is

active. To cancel the option and unlock the door, touch POWER/ CANCEL.

[] A small amount of water may remain in the dispensers after the

wash cycle is complete. This is normal.

[] This washer has a tight seal to avoid water leaks. To avoid odors,

leave the door open to allow the washer to dry between uses.

WASHERMAINTENANCE

WATER iNLET HOSES

Replace inlet hoses after 5 years of use to reduce the risk of hose failure, Periodically inspect and replace inlet hoses if bulges, kinks, cuts, wear, or leaks are found,

When replacing your inlet hoses, mark the date of replacement on the label with a permanent marker,

WASHER CARE

Recommendations to Help Keep Your Washer Clean and Performing at its Best

1. Always use High Efficiency (HE) detergents and follow the HE detergent manufacturer's instructions regarding the amount of HE detergent to use, Never use more than the recommended amount because that may increase the rate at which detergent and soil residue accumulate inside your washer, which in turn may result in undesirable odor,

2. Use warm or hot water washes sometimes (not exclusively cold water washes), because they do a better job of controlling the rate at which soils and detergent accumulate,

3. Always leave the washer door slightly ajar between uses to help dry out the washer and prevent the buildup of odor-causing residue,

Cleaning Your Front Loading Washer Read these instructions completely before beginning the

routine cleaning processes recommended below, This Washer Maintenance Procedure should be performed, at a minimum, once per month or every 30 wash cycles, whichever occurs sooner, to control the rate at which soils and detergent may otherwise accumulate in your washer,

Cleaning the Door Seal

1. Open the washer door and remove any clothing or items from the washer,

2. inspect the colored seal between the door opening and the drum for stained areas or soil buildup, Pull back the seal to inspect all areas under the seal and to check for foreign objects,

3. if stained areas or soil buildup are found, wipe down these areas of the seal using either of the following two procedures:

a. affresh :_Grit Grabber TM Cloth Procedure:

i, When the cycle is complete, gently pull back the rubber

door seal and clean the entire surface with the rough side of the Grit Grabber TM cloth,

b. Dilute Liquid Chlorine Bleach Procedure:

i, Mix a dilute bleach solution, using 3/4 cup (177 mL) of

liquid chlorine bleach and 1 gallon (3,8 L) of warm tap water,

ii, Wipe the seal area with the dilute solution, using

a damp cloth,

iii, Let stand 5 minutes, iv, Wipe down area thoroughly with a dry cloth and let

washer interior air dry with door open,

iMPORTANT:

[] Wear rubber gloves when cleaning with bleach, [] Refer to the bleach manufacturer's instructions for

proper use,

ff "_

WASHER CARE (cont.)

Cleaning the Inside of the Washer This washer has a special cycle that uses higher water volumes

in combination with affresh '_";Washer Cleaner or liquid chlorine bleach to thoroughly clean the inside of the washer, Steam washer models also utilize steam to enhance cleaning in this special cycle,

NOTE: Read these instructions completely before beginning the cleaning process,

Begin procedure

1. affresh :_Washer Cleaner Cycle Procedure (Recommended for Best Performance):

a. Open the washer door and remove any clothing or items, b. Add an affresh '_";Washer Cleaner tablet to the washer

drum,

c. Do not add the affresh "- Washer Cleaner tablet to the

dispenser drawer,

d. Do not add any detergent or other chemical to the washer

when following this procedure,

e. Close the washer door, f. Select the CLEAN WASHER cycle,

g. Touch and hold START to begin the cycle, The Clean

Washer Cycle Operation is described below,

2. Chlorine Bleach Procedure: a. Open the washer door and remove any clothing or items,

b. Open the dispenser drawer and add liquid chlorine bleach

to the MAX level in both the bleach compartment and the fabric softener compartment,

NOTE: Use of more liquid chlorine bleach than is recommended above could cause washer damage over time,

c. Close the washer door and the dispenser drawer, d. Do not add any detergent or other chemicals to the

washer when following this procedure,

e. Close the washer door, f. Select the CLEAN WASHER cycle,

g. Touch and hold START to begin the cycle, The Clean

Washer Cycle Operation is described below,

NOTE: For best results, do not interrupt cycle,

Description of Clean Washer Cycle Operation:

1. The Clean Washer cycle will determine whether clothing or other items are in the washer,

2. if no items are detected in the washer, it will proceed with the cycle,

a. if any items are detected in the washer, "rU' (remove load)

will be displayed, The door will unlock, Open washer and remove any garments from the washer drum,

b. Touch POWER/CANCEL to clear the "rU' code, c. Touch and hold START to restart the cycle,

After the cycle is complete, leave the door open slightly to allow for better ventilation and drying of the washer interior,

WASHERMAINTENANCE

WASHER CARE (cont.)

Cancellation of Clean Washer Cycle Operation: if the Clean Washer cycle is canceled by the user after it has

been initiated, it may take up to 30 minutes for the washer to purge any affresh <*;Cleaner, chlorine bleach, or other chemistry from the wash system and to adequately rinse any remaining chemistry, The washer door will remain locked until the cancellation process has been completed, This ensures no cleaning chemistry will be carried over to the next wash cycle and reduces the potential for damage to subsequent loads of laundry or to the washer itself,

Clean Washer Cycle Cancellation Procedure:

1. Touch POWER/CANCEL on the washer once,

2. The washer will begin to drain and rinse away the remaining cleaning chemistry,

3. The cycle will complete the cancellation process in approximately 30 minutes or less,

4. The washer then can be used to either repeat the Clean Washer cycle or to wash laundry using one of the regular wash cycles selected by the user,

Cleaning the Dispensers After a period of using your washer, you may find some residue

buildup in the washer's dispensers, To remove residue from the dispensers, remove the drawer and wipe the surfaces with a damp cloth and towel dry either before or after you run the Clean Washer cycle, Use an all-purpose surface cleaner, if needed,

IMPORTANT: Dispenser is not dishwasher safe, Cleaning the Outside of the Washer

Use a soft, damp cloth or sponge to wipe up any spills, Occasionally wipe the outside of your washer to help keep it looking new, Use mild soap and water,

iMPORTANT: To avoid damaging the washer's finish, do not use abrasive products,

CLEAN WASHER CYCLE REMINDER

The Clean Washer LED will flash _"'_-_/JJ at the end of a wash cycle when "_ "_'_e_n washer

the washer has run 30 wash ,,_h_,_ cycles. This is a reminder to run

the Clean Washer cycle, if the Clean Washer cycle is not turned on, the LED will stop

flashing at the end of a wash cycle after running 3 more regular wash cycles, After 30 more wash cycles are completed, the Clean Washer LED will again flash at the end of a wash cycle as

a reminder,

tf "_

To remove:

1. Pull dispenser drawer out until it stops,

2. Press down on the release tab and pull straight out to remove the dispenser,

3. Lift off cover panel by pulling straight up,

To replace:

1. Slide cover panel back onto posts on dispenser,

2. Align edges of dispenser with guides in washer, then slide dispenser

back into slot,

REMOVING THE DISPENSER

NON-USE AND VACATION CARE

f REINSTALLING/USING WASHER AGAIN

Operate your washer only when you are home, If moving, or not using your washer for a period of time, follow these steps:

1. Unplug or disconnect power to washer,

2. Turn off water supply to washer to avoid flooding due to water pressure surges,

3. Clean dispensers, See "Cleaning the Dispensers,"

" WINTER STORAGE CARE

IMPORTANT: To avoid damage, install and store washer

where it will not freeze, Because some water may stay in hoses, freezing can damage washer, If storing or moving during freezing weather, winterize your washer,

To winterize washer:

1. Shut off both water faucets, disconnect and drain water inlet hoses,

2. Put 1 qt, (1 L) of R.V,-type antifreeze in washer drum and run washer on NORMAL cycle for about 2 minutes to

mix antifreeze and remaining water.

3. Unplug washer or disconnect power.

TRANSPORTING YOUR WASHER

1. Shut off both water faucets. Disconnect and drain water inlet hoses.

2. If washer will be moved during freezing weather, follow WINTER STORAGE CARE directions before moving.

3. Disconnect drain hose from drain system and from back of washer.

4. Unplug power cord.

5. Place inlet hoses and drain hose inside washer drum.

6. Bundle power cord with a rubber band or cable tie to keep it from hanging onto the ground.

IMPORTANT: Call for service to install new transport bolts. Do not reuse transport bolts. Washer must be transported

in the upright position. To avoid structural damage to your washer, it must be properly set up for relocation by a certified technician.

To reinstall washer after non-use, vacation, winter storage, or moving:

1. Refer to Installation Instructions to locate, level, and connect washer.

2. Before using again, run washer through the following recommended procedure:

To use washer again:

1. Flush water pipes and hoses. Reconnect water inlet hoses. Turn on both water faucets.

Electrical Shock Hazard

Plug into a grounded 3 prong outlet.

Do not remove ground prong. Do not use an adapter.

Do not use an extension cord. Failure to follow these instructions can result in death,

fire, or electrical shock.

2. Plug in washer or reconnect power.

3. Run washer through NORMAL cycle to clean washer and remove antifreeze, if used. Use only HE detergent. Use half

the manufacturer's recommended amount for a medium-size load.

+ 33 hidden pages

Maytag MHW4200BW2, MHW4200BW1, MHW4200BW0, MHW4200BG2, MHW4200BG1 Owner’s Manual

Specifications and Main Features

Frequently Asked Questions

User Manual