Maytag MGDX6STBW Dimension Guide

29" Wide Models Dryer Dimensions

3"*

Gas Dryer

PRODUCT MODEL NUMBERS

MGDX6STB

Front View

29"

(737 mm)

433/8"

(1102 mm)

1

/2"

(13 mm)

NOTE: Leveling legs should be 1/2" (13 mm) (to match height of

3.6 cu. ft. capacity washer) or 1½" (38 mm) (to match height of

3.8 cu. ft. capacity washer).

Installation Spacing

14"* max.

(356 mm)

(76 mm)

Side View

223/4"

(578 mm)

Back View

273/4"

(705 mm)

133/4"

(349 mm)

A B

A. Wide opening side-swing door
B. Wide opening hamper door

4"

(101 mm)

273/4"

(705 mm)

51/2"*

(140 mm)

1"*

(25 mm)

*Required spacing

18"*

(457 mm)

1"*

(25 mm)

3"*

(76 mm)

48 in.2*

(310 cm

2

24 in.

(155 cm2)

/2"

301/4"

(768 mm)

(121 mm)

3

/4"

4

2

)

3

/4"

4

(121 mm)

*

Steam Non-Steam

1

14

(368 mm)

Installation spacing for recessed area or closet

The dimensions shown are for the minimum spacing allowed.

■ Additional spacing should be considered for ease of installation

and servicing.

■ Additional clearances might be required for wall, door, and oor

moldings.

■ Additional spacing of 1" (25 mm) on all sides of the dryer is

recommended to reduce noise transfer.

■ For closet installation, with a door, minimum ventilation openings

in the top and bottom of the door are required. Louvered doors
with equivalent ventilation openings are acceptable.

■ Companion appliance spacing should also be considered.

141/2"

(368 mm)

W10646607A

12/2014

27" Wide Models Dryer Dimensions

3"*

Front View

Back View

27"

(686 mm)

43"

(1092 mm)

1

/2"

(13 mm)

Side View

223/4"

(578 mm)

(749 mm)

A B

A. Wide opening side-swing door
B. Wide opening hamper door

Installation Spacing

14"* max.

(356 mm)

29

1

/2"

133/4"

(349 mm)

(76 mm)

291/2"

(749 mm)

(457 mm)

3

/8"

3

(85 mm)

(356 mm)

Non-Steam

14"

51/2"*

(140 mm)

(25 mm)

1"*

1"*

(25 mm)

*Required spacing

Installation spacing for recessed area or closet

The dimensions shown are for the minimum spacing allowed.

■ Additional spacing should be considered for ease of installation and servicing.

■ Additional clearances might be required for wall, door, and oor moldings.

■ Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer.

■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are

required. Louvered doors with equivalent ventilation openings are acceptable.

■ Companion appliance spacing should also be considered.

18"*

3"*

(76 mm)

48 in.2*

(310 cm

2

24 in.

(155 cm2)

2

)

*